Linux Command Line Tools

__ SUMMARY: __

Click on each to find out options, usage and examples.

__ [dahdi_cfg] __ - The userspace tools to control DAHDI spans/channels

__ [dahdi_genconf] __ - The DAHDI Configurator, which parses system.conf. Generates /etc/dahdi/system.conf and /etc/asterisk/dahdi_channels.conf, uses /etc/dahdi/genconf_parameters to define it's actions. It works well but remember it requires the "-F" option to work with FreePBX.

__ [dahdi_hardware] __ - Displays listing of DAHDI hardware detected <= Run this first as it is a great starting place. This tells you if Dahdi sees your devices when all overs fail.

__ [dahdi_maint] __ - Sets Dahdi spans into maintenance mode, e.g.: loopback

__ [dahdi_monitor] __ - Monitors signal level on analog channel so that you can adjust levels using fxtune.

__ [dahdi_registration] __ - Check if the __ Astribank __ spans are registered with DAHDI

__ [dahdi_scan] __ - Generates a list of things DAHDI channels, with some details

__ [dahdi_test] __ - Measures accuracy of the FXO/FXS board software digital signal processing

__ [dahdi_tool] __ - A basic tool to see your boards ports. It does show the alarm status of E1/T1 lines and almost shows if the board is configured. Otherwise, I've never seen the output do anything except toggle the one Act bit. Looks like it never reached its full potential.

__ [lsdahdi] __ - List all dahdi channels with their types and spans.