you want to connect rpl border router to other machines via internet or
just in virtual machine, you are having your rpl border router and you want
to ping it from the machine? try using tunslip
you want to connect rpl border router to other machines via internet or
just in virtual machine, you are having your rpl border router and you want
to ping it from the machine? try using tunslip
Thanking you,
Vipindev Adat
On Sun, Nov 27, 2016 at 1:22 AM, can canismail@users.sf.net wrote:
I am trying to ping the virtual machine's rpl border router to the main
machine but
I could not do. Can you suggest a suggestion on how to do it?
I'm trying to perform the command sudo make hello-world.upload using saved target sky. I've scoured the internet and not found a fix that has work for me yet. However, I keep getting the code below:
using saved target 'sky'
msp430-objcopy hello-world.sky -O ihex hello-world.ihex
make IHEXFILE=hello-world.ihex sky-reset sky-upload
make[1]: Entering directory '/home/liam/contiki/examples/hello-world'
using saved target 'sky'
make -k -j 20 sky-reset-sequence
make[2]: Entering directory '/home/liam/contiki/examples/hello-world'
using saved target 'sky'
../../tools/sky/msp430-bsl-linux --telosb -c /dev/ttyUSB1 -r
MSP430 Bootstrap Loader Version: 1.39-telos-7
Use -h for help
Reset device ...
Done
make[2]: Leaving directory '/home/liam/contiki/examples/hello-world'
make -j 20 sky-upload-sequence
make[2]: Entering directory '/home/liam/contiki/examples/hello-world'
using saved target 'sky'
+++++ Erasing /dev/ttyUSB1
MSP430 Bootstrap Loader Version: 1.39-telos-7
Use -h for help
Mass Erase...
Transmit default password ...
+++++ Programming /dev/ttyUSB1
MSP430 Bootstrap Loader Version: 1.39-telos-7
Invoking BSL...
Transmit default password ...
Current bootstrap loader version: 1.61 (Device ID: f16c)
Changing baudrate to 38400 ...
Program ...
42978 bytes programmed.
+++++ Resetting /dev/ttyUSB1
MSP430 Bootstrap Loader Version: 1.39-telos-7
Use -h for help
Reset device ...
Done
make[2]: Leaving directory '/home/liam/contiki/examples/hello-world'
make[1]: Leaving directory '/home/liam/contiki/examples/hello-world'
rm hello-world.ihex
To my understanding, this did not run correctly and breaks the subsequent command, make login which gives me:
using saved target 'sky'
../../tools/sky/serialdump-linux -b115200 /dev/ttyUSB1
connecting to /dev/ttyUSB1 (115200)
open: Invalid argument
../../platform/sky/Makefile.common:193: recipe for target 'login' failed
make: *** [login] Error 255
I think this means that the mote is not properly connected somehow??
With make motelist I receive back that my device is in /dev/ttyUSB1, which makes me think that it is properly connected.
Could someone advise me how to fix this?
(I apologize if this is not the correct place to ask; if it isn't please let me know where I should ask at.)
Thank you for your time.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I am having problems using "coffe-manager" with Zolertia Zoul RE-Mote hardware. I am trying to insert different files into the .bin image before its burning. Nevertheless files seem not to be available once the code is burned.
Is there any solution or configuration?
Thanks in advance.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi
I am new to contiki. I want to rent a server so that i can install contiki and try out the cooja simulator. Can someone help me with memory and procesor speed requirements.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Any decent system will get the job done. You will just nned to run contiki as a virtual machine using VMware or VirtualBox. I am not sure if it ansers your question
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Thank you dear Hangkum for your reply. However I am running Contiki as a
virtual machine using VMware, my issue is about relic implementation on
Contiki Os.
In other words, I would like to know how can I implement ECC on Contiki
without using Relic toolkit any other library?
Or if the use of library is the only path, how can I do it using Relic or
any other library?
Any decent system will get the job done. You will just nned to run contiki
as a virtual machine using VMware or VirtualBox. I am not sure if it ansers
your question
Hi all, i'm new to contiki.I've succesfully set up an RPL Border Router and a few sky-websense, it runs as expected and I'm able to acces the websense nodes. The RPL border router finds its neighbour nodes. But, my problem is when i paused it then it doesnot find the edge router address and i need to reset the edge router to catch the address. How can i solve ma issue other than reset option.... All help will be greatly appreaciated. with regrads, Neethu V P
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I am working with TelosB node in Contiki OS.
When I am running commands like motelist , .upload etc, the terminal is showing Clock Skew detected. Your build may be incomplete.
Can anyone tell what will be the reason for this? How can i avoid clock skew?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I try to implement thé RPL routing protocol with Contiki in order to imropve its advantages. I use the node energy metric. For that raison, I changed the following line in the file 'rpl-conf.h': #define RPL_DAG_MC RPL_DAG_MC_NONE
by : #define RPL_DAG_MC RPL_DAG_MC_NONE
However,the energy consumed values given are not logic. What is the problem?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi all, i'm new to contiki.I've succesfully set up an RPL Border Router and a few sky-websense, it runs as expected and I'm able to acces the websense nodes. The RPL border router finds its neighbour nodes. But, my problem is when i paused it then it doesnot find the edge router address and i need to reset the edge router to catch the address. How can i solve ma issue other than reset option.... All help will be greatly appreaciated. with regrads,
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello everbody
I am trying to use zoul platform found in contiki-ng (because of the memory limitation of sky mote) but this platform is not ported in Cooja. Even when I choose z1 platform ported in Cooja, it gives me error that no such platform called z1 because there is no corresponding z1 platform in contiki-ng.
How I can handle this issue?
Thanks.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
And then I created a new folder called MyProject-relic in contiki examples folder, where I created the RelicTest1.c and the Makefile and then I added the code lines below in Makefile.include from contiki-2.7 folder:
When I go to my MyProject-relic folder and try to compile RelicTest1.c I get this error(permission):
TARGET not defined, using target 'native'
CC ../../core/net/rime/rimeaddr.c
/bin/sh: 1: ../../MyProject/relic-target/include: Permission denied
/bin/sh: 1: ../../MyProject/relic-master/include: Permission denied
cc: error: -E or -x required when input is from standard input
make: *** [obj_native/rimeaddr.o] Error 126
I tried to run chmod, chown to give permission everywhere but nothing happens, I can't move forward, I really need help in order to solve my problem.
Any help or recommandation will be highly appreciated :) :)
Thank you
Best Regards;
Vially
Last edit: Vially KAZADI 2018-10-26
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi dears, I am trying to build contiki projects using contiki-3.0. but faced two problem; one is er-rest-example is not supporting zolertia, and the other is copper addon is not active even if i downgrade to the old firefox version.
any help....
thanks for considering
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I try for a few days to find a solution to my problem but in vain ... :(, knowing that I am new in programming in c: o
When I try to compile this .C code that I found somewhere (which is incomplete) on the contiki simulator, I get the following 2 errors:
code:
#include"contiki.h"
#include"stddef.h"/* For offsetof */
#include"stdio.h"
#include"contiki-conf.h"
#include"net/rime.h"
#include"net/netstack.h"
#include"cc2420.h"
#include"cc2420_const.h"
#include"contiki-net.h"//forNETSTACK_MAC
#include"packetbuf.h"
#include"broadcast.h"
#include"unicast.h"PROCESS(Relay_process,"Processus du noeud relais");AUTOSTART_PROCESSES(&Relay_process);staticvoidbroadcast_recv(structbroadcast_conn*c, constrimeaddr_t*from)
{
if(packetbuf_attr(PACKETBUF_ATTR_HANDOVER_REQ)==1)//silecapteurarecuunedemandedecommunication
{
printf("broadcast Request Received %d.%d\n",from->u8[0], from->u8[1]);leds_on(LEDS_BLUE);//HANDOVER_REP_TARGET=1;ID_REQUEST_Sender.u8[0]=from->u8[0];ID_REQUEST_Sender.u8[1]=from->u8[1];
}
}
PROCESS_THREAD(Relay_process, ev, data)
{
staticstructetimeret; // un timerPROCESS_BEGIN(); // debut du processusif(!HANDOVER_REP_TARGET)//siiln'y a pas eu de réponse
{
leds_on(LEDS_GREEN);etimer_set(&et,1*CLOCK_SECOND);PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
}
else
{
addr.u8[0] =ID_REQUEST_Sender.u8[0]; // destination = identificateur de l'emetteuraddr.u8[1] =ID_REQUEST_Sender.u8[1];packetbuf_clear();packetbuf_set_attr(PACKETBUF_ATTR_HANDOVER_REP,1);packetbuf_set_attr(PACKETBUF_ATTR_RELAY_LOC_X,Xrelay);packetbuf_set_attr(PACKETBUF_ATTR_RELAY_LOC_Y,Yrelay);//unicast_send(&uc,&addr);printf("sending Repmsg \n");leds_off(LEDS_GREEN);//}
PROCESS_END();
}
error
request for member u8 in something not a structure or union for the following lines:
ID_REQUEST_sender.u8[0]=from->u8[0];
ID_REQUEST_sender.u8[1]=from->u8[1];
addr.u8[0] =ID_REQUEST_Sender.u8[0];
addr.u8[1] =ID_REQUEST_Sender.u8[1];
error:
ID_REQUEST_Sender undeclared ; ( I did not declare it because I do not know what type will it take)
If anyone can help me I would be verry grateful :)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
you want to connect rpl border router to other machines via internet or
just in virtual machine, you are having your rpl border router and you want
to ping it from the machine? try using tunslip
Thanking you,
Vipindev Adat
On Sun, Nov 27, 2016 at 1:22 AM, can canismail@users.sf.net wrote:
I am using tunslip6 but the same result. I am trying to ping with java. Do
I need to use a proxy server ?
2016-11-27 0:15 GMT+03:00 VIpindev Adat vipindevadat@users.sf.net:
I am new to contiki. Can u please help me in installing contiki-3.1 and contiki IPSec in ubuntu 14.04
hi
How to calculate the PDR from the log in rpl-collect?
Hi,
You can use simulation script Sir. It is embeded inside Cooja
hi,
how to use simulation script for calculating PDR
On Wed, May 24, 2017 at 8:57 AM, Nurrahmat Pradeska npradeska08@users.sf.net wrote:
hi,
how to use simulation script for calculating PDR
On Wed, May 24, 2017 at 8:57 AM, Nurrahmat Pradeska npradeska08@users.sf.net wrote:
Hi, I'm new to contiki! [Ubuntu 16.04, x64].
I'm trying to perform the command
sudo make hello-world.upload
using saved target sky. I've scoured the internet and not found a fix that has work for me yet. However, I keep getting the code below:To my understanding, this did not run correctly and breaks the subsequent command,
make login
which gives me:I think this means that the mote is not properly connected somehow??
With
make motelist
I receive back that my device is in/dev/ttyUSB1
, which makes me think that it is properly connected.Could someone advise me how to fix this?
(I apologize if this is not the correct place to ask; if it isn't please let me know where I should ask at.)
Thank you for your time.
Hi
Check whether you have logged as super user
sudo su
and then give the password
Hi!
I am having problems using "coffe-manager" with Zolertia Zoul RE-Mote hardware. I am trying to insert different files into the .bin image before its burning. Nevertheless files seem not to be available once the code is burned.
Is there any solution or configuration?
Thanks in advance.
Hi
I am new to contiki. I want to rent a server so that i can install contiki and try out the cooja simulator. Can someone help me with memory and procesor speed requirements.
Any decent system will get the job done. You will just nned to run contiki as a virtual machine using VMware or VirtualBox. I am not sure if it ansers your question
Thank you dear Hangkum for your reply. However I am running Contiki as a
virtual machine using VMware, my issue is about relic implementation on
Contiki Os.
In other words, I would like to know how can I implement ECC on Contiki
without using Relic toolkit any other library?
Or if the use of library is the only path, how can I do it using Relic or
any other library?
Thank you
Best Regard,
Vially KAZADI
Le jeu. 22 nov. 2018 à 04:49, hangkum hlsc@users.sourceforge.net a écrit :
Hi all, i'm new to contiki.I've succesfully set up an RPL Border Router and a few sky-websense, it runs as expected and I'm able to acces the websense nodes. The RPL border router finds its neighbour nodes. But, my problem is when i paused it then it doesnot find the edge router address and i need to reset the edge router to catch the address. How can i solve ma issue other than reset option.... All help will be greatly appreaciated. with regrads, Neethu V P
I am working with TelosB node in Contiki OS.
When I am running commands like motelist , .upload etc, the terminal is showing
Clock Skew detected. Your build may be incomplete
.Can anyone tell what will be the reason for this? How can i avoid clock skew?
I try to implement thé RPL routing protocol with Contiki in order to imropve its advantages. I use the node energy metric. For that raison, I changed the following line in the file 'rpl-conf.h': #define RPL_DAG_MC RPL_DAG_MC_NONE
by : #define RPL_DAG_MC RPL_DAG_MC_NONE
However,the energy consumed values given are not logic. What is the problem?
Hi all, i'm new to contiki.I've succesfully set up an RPL Border Router and a few sky-websense, it runs as expected and I'm able to acces the websense nodes. The RPL border router finds its neighbour nodes. But, my problem is when i paused it then it doesnot find the edge router address and i need to reset the edge router to catch the address. How can i solve ma issue other than reset option.... All help will be greatly appreaciated. with regrads,
Hello everbody
I am trying to use zoul platform found in contiki-ng (because of the memory limitation of sky mote) but this platform is not ported in Cooja. Even when I choose z1 platform ported in Cooja, it gives me error that no such platform called z1 because there is no corresponding z1 platform in contiki-ng.
How I can handle this issue?
Thanks.
Hello everyone!
I am new in contiki and I want to implement Ed25519 algorithm using Relic toolkit, I already installed contiki and and downloaded relic in relic-master and built it in contiki-2.7/MyProject/relic-target as described in https://code.google.com/archive/p/relic-toolkit/wikis/BuildInstructions.wiki
And then I created a new folder called MyProject-relic in contiki examples folder, where I created the RelicTest1.c and the Makefile and then I added the code lines below in Makefile.include from contiki-2.7 folder:
RELIC_SOURCE = ../../MyProject/relic-master
RELIC_TARGET = ../../MyProject/relic-target
CFLAGS+= -|$(RELIC_SOURCE)/include -|$(RELIC_TARGET)/include -Os
PROJECT_LIBRARIES+= $(RELIC_TARGET)/lib/librelic_s.a
When I go to my MyProject-relic folder and try to compile RelicTest1.c I get this error(permission):
TARGET not defined, using target 'native'
CC ../../core/net/rime/rimeaddr.c
/bin/sh: 1: ../../MyProject/relic-target/include: Permission denied
/bin/sh: 1: ../../MyProject/relic-master/include: Permission denied
cc: error: -E or -x required when input is from standard input
make: *** [obj_native/rimeaddr.o] Error 126
I tried to run chmod, chown to give permission everywhere but nothing happens, I can't move forward, I really need help in order to solve my problem.
Any help or recommandation will be highly appreciated :) :)
Thank you
Best Regards;
Vially
Last edit: Vially KAZADI 2018-10-26
I am trying to build PRIME PLC on Contiki OS and simulate it in Cooja, Can anyone help me?
Thanks in advnce.
Hi dears, I am trying to build contiki projects using contiki-3.0. but faced two problem; one is er-rest-example is not supporting zolertia, and the other is copper addon is not active even if i downgrade to the old firefox version.
any help....
thanks for considering
Dear Sir,
I am looking for a source code of prime plc mote in Cooja, Could you
provide some help ? Thanks in advance.
Hello everyone ... I really need help :( ...
I try for a few days to find a solution to my problem but in vain ... :(, knowing that I am new in programming in c: o
When I try to compile this .C code that I found somewhere (which is incomplete) on the contiki simulator, I get the following 2 errors:
code:
error
request for member u8 in something not a structure or union for the following lines:
ID_REQUEST_sender.u8[0]=from->u8[0];
ID_REQUEST_sender.u8[1]=from->u8[1];
addr.u8[0] =ID_REQUEST_Sender.u8[0];
addr.u8[1] =ID_REQUEST_Sender.u8[1];
error:
ID_REQUEST_Sender undeclared ; ( I did not declare it because I do not know what type will it take)
If anyone can help me I would be verry grateful :)
Hi, someone is working with Contiki & Cooja to simulate Lorawan protocol? .... I need some help- I want to analize the traficc of packets....
Last edit: Enrique Merino 2020-02-22