[clisp-list] CLISP crashes on cl-glut (on my machine only?)

[<and...@gm...>]

Hello everyone,

  I'm having a weird crash in CLISP for Windows
while using the cl-glut package.

  In my CLISP+Quicklisp installation the example
cl-glut-examples:rb-double runs correctly (i.e.
opens a window and draws a rotating square)
for about 1 second, then a fault is reported on
the REPL console, then lisp.exe crashes. This is
the usual output I get in the REPL:

-------------------------------------
[1]> (ql:quickload :cl-glut-examples)
To load "cl-glut-examples":
  Load 1 ASDF system:
    cl-glut-examples
; Loading "cl-glut-examples"
.........
(:CL-GLUT-EXAMPLES)
[2]> (cl-glut-examples:rb-double)

*** - handle_fault error2 ! address = 0x0 not in [0x19a90000,0x19f33130) !
SIGSEGV cannot be cured. Fault address = 0x0.
GC count: 106
Space collected by GC: 0 91857020
Run time: 0 102804659
Real time: 0 419175195
GC time: 0 13416086
Permanently allocated: 92960 bytes.
Currently in use: 10052588 bytes.
Free space: 4 bytes.
-------------------------------------

  This problem does *not* happen on the same
machine using SBCL or Clozure CL, and does
*not* happen on the same CLISP version using
another Windows XP machine I could find from
a friend. In other words, all combinations
work properly, except mine :( .

  This is my configuration:

-------------------------------------
  My CLISP is GNU CLISP 2.49 (2010-07-07), downloaded from 
http://sourceforge.net/projects/clisp/files/latest/download

  My Quicklisp is Quicklisp Beta version 2012112500 dowloaded
from http://beta.quicklisp.org/quicklisp.lisp

  My machine configuration is:
  - Windows 7 Home 64bit
  - video card ATI Radeon 5650
  - freeglut DLL v.2.8.1 build for MinGW 32bit, downloaded
    from http://www.transmissionzero.co.uk/software/freeglut-devel/
-------------------------------------

  My questions are:

1) did someone experience a similar problem on a machine
   with similar configuration?

2) is there some command or flag I could enable in the REPL for
   a better diagnosys?

3) I know CLISP can be compiled with a --with-debug flag, but
   (due to my limited ability with MinGW+configure+make)
   I wasn't able to compile it on MinGW. Do you know of any
   available binaries precompiled  with --with-debug for Windows?
   Or alternatively: if you have them, would you mind to share them
   for a test?

  Sincerely thanks for any help or advice you can
provide, kindest regards.

Andrea