#89 Burnatonce Problems
I've been using the Burnatonce support forum for help
with writing failure problems.
Jaimie suggested I send you the log being that he has
no more suggestions for me to try to resolve this
problem. Just flashed firmware to latest version, but no
change.
I'd appreciate it if you can give me any guidance.
This is log file. Thanks very much! Phil
burnatonce 0.99b Windows Version:
5.0.2195
-------------------------------------------------------
-------
Cdrdao version 1.1.7 - (C) Andreas Mueller
<andreas@daneb.de>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
burnatonce extensions version 0.4 - (C) thop
Using libscg version 'rs-0.7+'
Initializing SPTI ... OK!
1,0,0: LG, CD-RW CED-8120B, 2.00
1,1,0: LG, DVD-ROM DRD8160B, 1.01
-------------------------------------------------------
-------
Initializing SPTI ... OK!
SPTI:1,0,0: LG CD-RW CED-8120B Rev: 2.00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options
0x0000)
Reads : CD-R CD-RW
Writes : CD-R CD-RW
Features: CD-TEXT
Buffer Underrun Protection: no
Buffer Size: 8192 kB
Inserted Media: CD-RW
Maximum Reading Speed : 5645 kB/s (32x)
Maximum Writing Speed : 706 kB/s (4x)
-------------------------------------------------------
-------
burnatonce found the following external tools:
Cdrdao for cd writing
DVDRecord for dvd writing
Mkisofs for iso creation
WaveGain for ReplayGain
MadPlay for mp3 decoding
Ogg Decoder
FLAC Decoder
-------------------------------------------------------
-------
-------------------------------------------------------
-------
Initializing SPTI ... OK!
SPTI:1,0,0: LG CD-RW CED-8120B Rev: 2.00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options
0x0000)
Reads : CD-R CD-RW
Writes : CD-R CD-RW
Features: CD-TEXT
Buffer Underrun Protection: no
Buffer Size: 8192 kB
Inserted Media: CD-RW
Maximum Reading Speed : 5645 kB/s (32x)
Maximum Writing Speed : 706 kB/s (4x)
-------------------------------------------------------
-------
Initializing SPTI ... OK!
SPTI:1,0,0: LG CD-RW CED-8120B Rev: 2.00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options
0x0000)
That data below may not reflect the real status of the
inserted medium
if a simulation run was performed before. Reload the
medium in this case.
CD-RW : yes
Total Capacity : 74:41:00 (336075 blocks, 656/753
MB)
CD-R medium : Mitsubishi Chemical Corporation
Long Strategy Type, e.g. Cyanine
Recording Speed : 0X - 4X
CD-R empty : yes
-------------------------------------------------------
-------
Initializing SPTI ... OK!
SPTI:1,0,0: LG CD-RW CED-8120B Rev: 2.00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options
0x0000)
Reads : CD-R CD-RW
Writes : CD-R CD-RW
Features: CD-TEXT
Buffer Underrun Protection: no
Buffer Size: 8192 kB
Inserted Media: CD-RW
Maximum Reading Speed : 5645 kB/s (32x)
Maximum Writing Speed : 706 kB/s (4x)
-------------------------------------------------------
-------
Initializing SPTI ... OK!
SPTILOCK:1,0,0: LG CD-RW CED-8120B Rev: 2.00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options
0x0000)
Starting write at speed 4...
Process can be aborted with QUIT signal (usually CTRL-
\).
Executing power calibration...
Power calibration successful.
?: I/O error. : scsi sendcmd: retryable error
CDB: 2A 00 FF FF FF 6A 00 00 1A 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.001s timeout 180s
ERROR: Write data failed.
ERROR: Writing failed.
-------------------------------------------------------
-------
Initializing SPTI ... OK!
SPTI:1,0,0: LG CD-RW CED-8120B Rev: 2.00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options
0x0000)
Reads : CD-R CD-RW
Writes : CD-R CD-RW
Features: CD-TEXT
Buffer Underrun Protection: no
Buffer Size: 8192 kB
Inserted Media: CD-RW
Maximum Reading Speed : 5645 kB/s (32x)
Maximum Writing Speed : 706 kB/s (4x)
-------------------------------------------------------
-------
Initializing SPTI ... OK!
SPTI:1,0,0: LG CD-RW CED-8120B Rev: 2.00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options
0x0000)
Reads : CD-R CD-RW
Writes : CD-R CD-RW
Features: CD-TEXT
Buffer Underrun Protection: no
Buffer Size: 8192 kB
Inserted Media: CD-RW
Maximum Reading Speed : 5645 kB/s (32x)
Maximum Writing Speed : 706 kB/s (4x)
-------------------------------------------------------
-------
Initializing SPTI ... OK!
SPTI:1,0,0: LG CD-RW CED-8120B Rev: 2.00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options
0x0000)
That data below may not reflect the real status of the
inserted medium
if a simulation run was performed before. Reload the
medium in this case.
CD-RW : yes
Total Capacity : 74:41:00 (336075 blocks, 656/753
MB)
CD-R medium : Mitsubishi Chemical Corporation
Long Strategy Type, e.g. Cyanine
Recording Speed : 0X - 4X
CD-R empty : yes
-------------------------------------------------------
-------
Initializing SPTI ... OK!
SPTI:1,0,0: LG CD-RW CED-8120B Rev: 2.00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options
0x0000)
Reads : CD-R CD-RW
Writes : CD-R CD-RW
Features: CD-TEXT
Buffer Underrun Protection: no
Buffer Size: 8192 kB
Inserted Media: CD-RW
Maximum Reading Speed : 5645 kB/s (32x)
Maximum Writing Speed : 706 kB/s (4x)
-------------------------------------------------------
-------
Initializing SPTI ... OK!
SPTILOCK:1,0,0: LG CD-RW CED-8120B Rev: 2.00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options
0x0000)
Starting write at speed 4...
Process can be aborted with QUIT signal (usually CTRL-
\).
Executing power calibration...
Power calibration successful.
?: I/O error. : scsi sendcmd: retryable error
CDB: 2A 00 FF FF FF 6A 00 00 1A 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 180s
ERROR: Write data failed.
ERROR: Writing failed.
Logged In: NO
My email address is pliva@verizon.net
Do I need to create an account?
Can I get support here for Burnatonce? If not I'll go away.
Please let me know.
Thanks!
Phil