#106 CD-TEXT on CRX140:does not accept any cue sheet variant
Platform: Mac OS X
Drive: Sony CRX140E (also reportedly fails on DVR-104)
Device: IOCompactDiscServices
Drivers: generic-mmc, generic-mmc-raw
With generic-mmc:
Using libscg version 'andreas-0.5-UNIXWARE_Patch'
IOCompactDiscServices: SONY CD-RW CRX140E Rev:
1.2a
Using driver: Generic SCSI-3/MMC - Version 2.0 (options
0x0000)
Starting write resid: 106
at speed 1...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
WARNING: No super user permission to setup real time
scheduling.
resid: 104
Executing power calibration...
Power calibration successful.
ERROR: Drive does not accept any cue sheet variant - please
report.
ERROR: Writing failed.
With generic-mmc-raw:
Starting write simulation resid: 106
at speed 1...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
resid: 104
Using 96 byte raw P-W sub-channel data mode for CD-TEXT.
WARNING: No super user permission to setup real time
scheduling.
Writing lead-in and gap...
?: Undefined error: 0. : scsi sendcmd: no error
CDB: 2A 00 FF FF DB 60 00 00 0D 00
status: 0x2 (CHECK CONDITION)
Sense Bytes:
70 00 02 00 00 00 00 12 00 00 00 00 04 08 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x08 (logical unit not ready, long
write in progress) Fru
0x0
Sense flags: Blk 0 (not valid)
resid: 31824
cmd finished after 0.096s timeout 20s
ERROR: Write data failed.
ERROR: Simulation failed.
?: Undefined error: 0. : scsi sendcmd: no error
CDB: 1E 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes:
70 00 06 00 00 00 00 12 00 00 00 00 29 00 00 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device
reset occurred) Fru 0
x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.010s timeout 20s
ERROR: Cannot prevent/allow medium removal.
Logged In: YES
user_id=189212
Added note: on further study, it looks like I had not enabled CD-
TEXT support at all. Upon enabling it, it gave me some minor
errors about the content (FOO not defined for all tracks, for some
value of FOO), which I corrected, but it still fails in the same way.
The contents is well within the capacity of the disc (about 55
minutes of audio on a 70 minute CD-R), so this is not an
overburning issue.
I'm currently using 1.1.7, BTW.
Logged In: YES
user_id=122507
Note: I have the same drive, under cdrdao 1.1.4, CD-TEXT
works fine.