From: SourceForge.net <no...@so...> - 2008-02-18 15:41:47
|
Bugs item #1895919, was opened at 2008-02-18 12:30 Message generated for change (Comment added) made by l07 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=425407&aid=1895919&group_id=39505 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: 107 (l07) Assigned to: Nobody/Anonymous (nobody) Summary: No configuration available for device ID: ffff Initial Comment: I use avarice 2.6 on Linux 2.6.24-gentoo-r2. I have a JTAGICEmkII and ATmega64. In Windows and AvrStudio4 I can upload and download flash/eep and etc. (Fuse bit JTAGEN = 1). But in avarice I have: $ avarice -2 -jusb JTAG config starting. Found a device: JTAGICEmkII Serial number: 00:b0:00:00:37:2d Reported JTAG device ID: 0xFFFF No configuration available for device ID: ffff In debug mode I see: Automatic device detection: response: 81 FF FF FF FF JTAG id = 0xFFFFFFFF : Ver = 0xf : Device = 0xffff : Manuf = 0x7ff No configuration available for device ID: ffff (see attach file). If I try to set -P atmega64 in command line, avarice say: Reported JTAG device ID: 0xFFFF Configured for device ID: 0x9602 atmega64 -- FORCED with atmega64 JTAG config complete. JTAG ICE: Cannot synchronise Thank you. ---------------------------------------------------------------------- >Comment By: 107 (l07) Date: 2008-02-18 18:41 Message: Logged In: YES user_id=1225313 Originator: YES Probleme resolved by setting OCDEN fuse bit in AvrStudio4 on Windows. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=425407&aid=1895919&group_id=39505 |