[Apcupsd-users] BX950MI shutdown too early / MINTIMEL and MBATTCHG are not respected.
Brought to you by:
adk0212
|
From: Benny K <Be...@gm...> - 2023-09-20 07:57:17
|
Hi there, I bought a new APC Back-UPS BX950MI. Works fine so far, but the shutdown of my computer seems to be too early after power failure (approx. 5minutes after powerfailure) .. What I noticed while in power-failure: - After 5minutes the Charge is at 91.0 Percent and Time Left "54.4 Minutes"... looks fine for me - STATUS changed from ONBATT to ONBATT LOWBATT and then the system shuts down.. I wonder why MINTIMEL:5 Minutes and MBATTCHG:10 Percent are not respected. Is the shutdown initiated too early, because of the "ONBATT LOWBATT" after 5 minutes? Is there a way to adjust the threshhold for "ONBATT LOWBATT"? Please see below for timeline, apcupsd.conf, apcaccess-output, apctest-output By the way: I installaed apcupsd-version: 3.14.14-3.1 Thanks and Best Regards Benjamin ###### Timeline: apcaccess @17:05:39 -->> started powerfailure STATUS : ONBATT BCHARGE : 100.0 Percent TIMELEFT : 59.7 Minutes MINTIMEL : 5 Minutes MBATTCHG : 10 Percent apcaccess @17:10:57 STATUS : ONBATT BCHARGE : 91.0 Percent TIMELEFT : 54.5 Minutes MINTIMEL : 5 Minutes MBATTCHG : 10 Percent apcaccess @17:11:03 -->> System Shutdown initiated STATUS : ONBATT LOWBATT BCHARGE : 91.0 Percent TIMELEFT : 54.4 Minutes MBATTCHG : 10 Percent MINTIMEL : 5 Minutes ###### $apcaccess: APC : 001,038,0951 DATE : 2023-09-20 09:16:53 +0200 HOSTNAME : hoschi VERSION : 3.14.14 (31 May 2016) debian UPSNAME : ups-wz CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2023-09-19 18:01:10 +0200 MODEL : Back-UPS BX950MI STATUS : ONLINE LINEV : 228.0 Volts LOADPCT : 8.0 Percent BCHARGE : 100.0 Percent TIMELEFT : 59.7 Minutes MBATTCHG : 10 Percent MINTIMEL : 5 Minutes MAXTIME : 0 Seconds SENSE : Medium LOTRANS : 145.0 Volts HITRANS : 295.0 Volts ALARMDEL : No alarm BATTV : 13.6 Volts LASTXFER : High line voltage NUMXFERS : 2 XONBATT : 2023-09-19 19:38:00 +0200 TONBATT : 0 Seconds CUMONBATT: 25 Seconds XOFFBATT : 2023-09-19 19:38:10 +0200 LASTSTEST: 2023-09-19 18:10:03 +0200 SELFTEST : OK STATFLAG : 0x05000008 SERIALNO : 9B2319A31772 BATTDATE : 2023-09-18 NOMINV : 230 Volts NOMBATTV : 12.0 Volts NOMPOWER : 520 Watts FIRMWARE : 295202G -302202G END APC : 2023-09-20 09:17:46 +0200 ####### /etc/apcupsd/apcupsd.conf: UPSNAME ups-wz UPSCABLE usb UPSTYPE usb LOCKFILE /var/lock SCRIPTDIR /etc/apcupsd PWRFAILDIR /etc/apcupsd NOLOGINDIR /etc ONBATTERYDELAY 6 BATTERYLEVEL 10 MINUTES 5 TIMEOUT 0 ANNOY 300 ANNOYDELAY 60 NOLOGON disable KILLDELAY 0 NETSERVER on NISIP 127.0.0.1 NISPORT 3551 EVENTSFILE /var/log/apcupsd.events EVENTSFILEMAX 10 UPSCLASS standalone UPSMODE disable STATTIME 0 STATFILE /var/log/apcupsd.status LOGSTATS off DATATIME 0 BEEPSTATE N ##### apctest menu: Please select the function you want to perform. 1) Test kill UPS power 2) Perform self-test 3) Read last self-test result 4) View/Change battery date 5) View manufacturing date 6) View/Change alarm behavior 7) View/Change sensitivity 8) View/Change low transfer voltage 9) View/Change high transfer voltage 10) Perform battery calibration 11) Test alarm 12) View/Change self-test interval Q) Quit |