Re: [Apcupsd-users] In Multimon.cgi there is no information

[Ted M. <te...@mi...>]

make sure it works with apcaccess first.  What is the output of apcaccess?

Ted

On 3/15/2020 4:53 AM, Andrea Miconi via Apcupsd-users wrote:
> I have a Raspberry PI 4 4GB and an APC Back-UPS 950VA (BX950UI).
> I wanted to activate a Master / Slave system to turn off this and the 
> other PCs as well.
>
> In the multimon.cgi I see:
> System: link to Local Host
> Model: Not found
> Status: Comm Lost, in red
> No value in Battery Chg, Utility, UPS Load, USB Temp, Batt. Run Time.
>
> In the Local Host I see:
> Monitoring: rpc-01
> UPS Model: Not found
> UPS Name: gp-ups
> APCUPSD: Version 3.14.14
> Status: COMM LOST
>
> Last UPS Self Test: Not found
> Last Test Date: Not found
>
> Utility Voltage: Not found VAC
> Line Minimum: Not found VAC
> Line Maximum: Not found VAC
> Output Freq: Not found Hz
>
> The three graphs are obviously not correct
>
> In All Data I see:
> APC      : 001,018,0439
> DATE     : 2020-03-15 11:29:07 +0100
> HOSTNAME : rpc-01
> VERSION  : 3.14.14 (31 May 2016) debian
> UPSNAME  : gp-ups
> CABLE    : USB Cable
> DRIVER   : USB UPS Driver
> UPSMODE  : Stand Alone
> STARTTIME: 2020-03-15 11:27:50 +0100
> STATUS   : COMMLOST
> MBATTCHG : 5 Percent
> MINTIMEL : 3 Minutes
> MAXTIME  : 0 Seconds
> NUMXFERS : 0
> TONBATT  : 0 Seconds
> CUMONBATT: 0 Seconds
> XOFFBATT : N/A
> STATFLAG : 0x05000100
> END APC  : 2020-03-15 12:35:07 +0100
>
>
>
>
>
> _______________________________________________
> Apcupsd-users mailing list
> Apc...@li...
> https://lists.sourceforge.net/lists/listinfo/apcupsd-users