[Apcupsd-users] Version of apcupsd 3.14.8 does not show the status of my Back-UPS CS 650. The STATUS field in file apcupsd.status empty

[dak6 <da...@ya...>]

Version of apcupsd 3.14.8 does not show the status of my Back-UPS CS 650. The STATUS field in file apcupsd.status empty

Technical data:

Operating system: Windows 2003 Server Service Pack 2 UPS model: Back-UPS CS 650 Version of the firmware: 817.v7. I USB FW: v7 Cable Type: USB (940-0127E-FCI) Version of apcupsd: 3.14.8 (16 January 2010) Win32

If necessary I will send the trace of apcupsd.

Contents of apcupsd.status :
=======================
APC 　　　　　: 001,044,1049
DATE 　　　　: 2011-03-24 09:02:44 +1000
HOSTNAME : buh53
VERSION 　: 3.14.8 (16 January 2010) Win32 UPSNAME 　: buh53 CABLE 　　　: USB Cable MODEL 　　　: Back-UPS CS 650 UPSMODE 　: Stand Alone
STARTTIME: 2011-06-24 08:57:36 +1000
STATUS 　　:
LINEV 　　　: 236.0 Volts
LOADPCT 　: 　　0.0 Percent Load Capacity
BCHARGE 　: 100.0 Percent
TIMELEFT : 　53.3 Minutes
MBATTCHG : 5 Percent
MINTIMEL : 3 Minutes
MAXTIME 　: 0 Seconds
OUTPUTV 　: 230.0 Volts
SENSE 　　　: High
DWAKE 　　　: 000 Seconds
DSHUTD 　　: 180 Seconds
LOTRANS 　: 180.0 Volts
HITRANS 　: 266.0 Volts
RETPCT 　　: 000.0 Percent
ITEMP 　　　: 29.2 C Internal
ALARMDEL : Always
BATTV 　　　: 13.6 Volts
LINEFREQ : 50.0 Hz
LASTXFER : Low line voltage
NUMXFERS : 0
TONBATT 　: 0 seconds
CUMONBATT: 0 seconds
XOFFBATT : N/A
SELFTEST : NO
STESTI 　　: None
STATFLAG : 0x07000000 Status Flag
SERIALNO : 5B1042T53313
BATTDATE : 2010-10-17
NOMOUTV 　: 230 Volts
NOMINV 　　: 000 Volts
NOMBATTV : 　12.0 Volts
NOMPOWER : 400 Watts
FIRMWARE : 817.v7 .I USB FW:v7
APCMODEL : Back-UPS CS 650
END APC 　: 2011-03-24 09:02:44 +1000