ADI Buildroot / Bugs / #252 power usbhost fails while power core case pass on bf609.

It passes on bf609 ezkit now. close.

Booting kernel from Legacy Image at 02000000 ...

Image Name: bf609-0.0-3.17.0-rc4-ADI-2014R1-
Image Type: Blackfin Linux Kernel Image (gzip compressed)
Data Size: 7850316 Bytes = 7.5 MiB
Load Address: 00001000
Entry Point: 00317b3c
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting Kernel at = 00317b3c
Linux version 3.17.0-rc4-ADI-2014R1-pre-00420-g76c28e4-dirty (test@linux83-bf609-usbhost) (gcc version 4.3.5 (ADI-master/git-46c6a72) ) #4 Tue Oct 14 15:24:08 CST 2014
register early platform devices
bootconsole [early_shadow0] enabled
ERROR: Not running on ADSP-BF609: unknown CPUID 0x0000 Rev 0.0
bootconsole [early_BFuart0] enabled
early printk enabled on early_BFuart0
Board Memory: 128MB
Kernel Managed Memory: 128MB
Memory map:
fixedcode = 0x00000400-0x00000490
text = 0x00001000-0x0021d218
rodata = 0x0021d23c-0x002cd24c
bss = 0x002ce000-0x002e70c8
data = 0x002e70e0-0x00314000
stack = 0x00312000-0x00314000
init = 0x00314000-0x0090d000
available = 0x0090d000-0x07f00000
DMA Zone = 0x07f00000-0x08000000
Hardware Trace active and enabled
Blackfin support (C) 2004-2010 Analog Devices, Inc.
Compiled for ADSP-BF609 Rev 0.0
Blackfin Linux support by http://blackfin.uclinux.org/
Processor Speed: 500 MHz core clock, 125 MHz SCLk, 125 MHz SCLK0, 125 MHz SCLK1 and 250 MHz DCLK
NOMPU: setting up cplb tables
Instruction Cache Enabled for CPU0
External memory: cacheable in instruction cache
L2 SRAM : uncacheable in instruction cache
Data Cache Enabled for CPU0
External memory: cacheable (write-back) in data cache
L2 SRAM : uncacheable in data cache
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 32258
Kernel command line: root=/dev/mtdblock0 rw ip=10.100.4.50 earlyprintk=serial,uart0,57600 console=ttyBF0,57600 ip=10.100.4.50:10.100.4.174:10.100.4.174:255.255.255.0:"bf609-ezkit":eth0:off
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 119612K/130048K available (2160K kernel code, 179K rwdata, 704K rodata, 6116K init, 100K bss, 10436K reserved, 1024K DMA)
NR_IRQS:291
Configuring Blackfin Priority Driven Interrupts
Console: colour dummy device 80x25
Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
devtmpfs: initialized
Blackfin Scratchpad data SRAM: 4 KB
Blackfin L1 Data A SRAM: 16 KB (9 KB free)
Blackfin L1 Data B SRAM: 16 KB (16 KB free)
Blackfin L1 Instruction SRAM: 64 KB (48 KB free)
Blackfin L2 SRAM: 256 KB (256 KB free)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
Blackfin DMA Controller
ezkit_init(): registering device resources
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-bfin-twi i2c-bfin-twi.0: Blackfin on-chip I2C TWI Contoller, regs_base@ffc01e00
i2c-bfin-twi i2c-bfin-twi.1: Blackfin on-chip I2C TWI Contoller, regs_base@ffc01f00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
PTP clock support registered
NET: Registered protocol family 23
Switched to clocksource bfin_cs_cycles
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
msgmni has been set to 233
io scheduler noop registered (default)
bfin-uart: Blackfin serial driver
bfin-uart.0: ttyBF0 at MMIO 0xffc02000 (irq = 88, base_baud = 7812500) is a BFIN-UART
console [ttyBF0] enabled
console [ttyBF0] enabled
bootconsole [early_BFuart0] disabled
bootconsole [early_BFuart0] disabled
bootconsole [early_shadow0] disabled
physmap platform flash device: 01000000 at b0000000
physmap-flash physmap-flash.0: map_probe failed
m25p80 spi0.59: w25q32 (4096 Kbytes)
Creating 3 MTD partitions on "m25p80":
0x000000000000-0x000000080000 : "bootloader(spi)"
0x000000080000-0x000000200000 : "linux kernel(spi)"
0x000000200000-0x000000400000 : "file system(spi)"
CAN device driver interface
bfin_can bfin_can.0: bfin_can device registered(&reg_base=ffc00a00, rx_irq=47, tx_irq=48, err_irq=49, sclk=125000000)
stmmaceth stmmaceth.0: no reset control found
stmmac - user ID: 0x10, Synopsys ID: 0x36
Ring mode enabled
DMA HW capability register supported
Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported (type 2)
Wake-Up On Lan supported
Enable RX Mitigation via HW Watchdog Timer
libphy: stmmac: probed
eth0: PHY ID 20005c90 at 1 IRQ POLL (stmmac-0:01) active
usbcore: registered new interface driver usb-storage
musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
zero gadget: Gadget Zero, version: Cinco de Mayo 2008
zero gadget: zero ready
input: bfin-rotary as /devices/platform/bfin-rotary/input/input0
i2c /dev entries driver
bfin_wdt: initialized: timeout=20 sec (nowayout=0)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
eth0: device MAC address 02:80:ad:20:31:e8
dma_alloc_init: dma_page @ 0x05008000 - 256 pages at 0x07f00000
IP-Config: Complete:
device=eth0, hwaddr=02:80:ad:20:31:e8, ipaddr=10.100.4.50, mask=255.255.255.0, gw=10.100.4.174
host="bf609-ezkit", domain=, nis-domain=(none)
bootserver=10.100.4.174, rootserver=10.100.4.174, rootpath=
Freeing unused kernel memory: 6116K (00314000 - 0090d000)
usb 1-1: new high-speed USB device number 2 using musb-hdrc
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.3: new high-speed USB device number 3 using musb-hdrc
usb-storage 1-1.3:1.0: USB Mass Storage device detected

BusyBox v1.22.1 (2014-10-14 00:12:21 CST) hush - the humble shell

root:/> scsi host0: usb-storage 1-1.3:1.0
iusb 1-1.4: new high-speed USB device number 4 using musb-hdrc
fconfig etscsi 0:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 4.05 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 3999373 512-byte logical blocks: (2.04 GB/1.90 GiB)
stmmaceth stmmaceth.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
scsi 0:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 4.05 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
h sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI removable disk
0 10.100.4.50
root:/> ^[[43;9R^[[43;9REthernet may has been activated already!
random: nonblocking pool is initialized
version
kernel: Linux release 3.17.0-rc4-ADI-2014R1-pre-00420-g76c28e4-dirty, build #4 Tue Oct 14 15:24:08 CST 2014
toolchain: /home/test/workspace/src/kernel/label/BF609-EZKIT-USBHOST/output/host/usr/bin/bfin-linux-uclibc-gcc release gcc version 4.3.5 (ADI-master/git-46c6a72)
user-dist: release git-426e749, build #2 Tue Oct 14 15:20:49 CST 2014
root:/> ^[[43;9R
Linux version: 3.17.0-rc4-ADI-2014R1-pre-00420-g76c28e4-dirty
GCC version: 4.3.5 (ADI-master/git-46c6a72)
user-dist version: git-426e749

STEP 3: Start testing

root:/> dmesg|grep -i sd
sd 0:0:0:0: [sda] 3999373 512-byte logical blocks: (2.04 GB/1.90 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI removable disk
root:/>
Case 1 ...PASS
^[[43;9Rmke2fs /dev/sda1
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
62592 inodes, 249976 blocks
12498 blocks (5%) reserved for the super user
First data block=0
Maximum filesystem blocks=4194304
8 block groups
32768 blocks per group, 32768 fragmen^[[43;9Rts per group
7824 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
root:/>
Case 2 ...PASS
mount -t ext2 /dev/sda1 /mnt
root:/>
Case 3 ...PASS
mount
rootfs on / type rootfs (rw)
devtmpfs on /dev type devtmpfs (rw,relatime,mode=0755)
^[[43;1R/proc type proc (rw,nosuid,nodev,noexec,relatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
mdev on /dev type tmpfs (rw,nosuid,relatime,mode=0755,size=10M)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
var on /var type tmpfs (rw,relatime)
tmp on /tmp type tmpfs (rw,nosuid,nodev,relatime,mode=777)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/sda1 on /mnt type ext2 (rw,relatime,errors=continue)
root:/>
Case 4 ...PASS
time dd conv=fsync if=/dev/zero of=/mnt/5m.bin bs=1M count=5
^[[43;1R^[[43;2R5+0 records in
5+0 records out
real 0m 1.12s
user 0m 0.00s
sys 0m 0.23s
root:/>
ase 5 ...PASS
ntime cat /mnt/5m.bin > /dev/null
real 0m 0.07s
user 0m 0.00s
sys 0m 0.06s
root:/>
Case 6 ...PASS
^[[43;9Rrm /mnt/5m.bin; sync
root:/>
Case 7 ...PASS
umount /mnt
root:/>
Case 8 ...PASS
ls /mnt
root:/>
Case 9 ...PASS
cat /proc/mounts
^[[43;1Rrootfs / rootfs rw 0 0
devtmpfs /dev devtmpfs rw,relatime,mode=0755 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
mdev /dev tmpfs rw,nosuid,relatime,mode=0755,size=10M 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600 0 0
var /var tmpfs rw^[[43;1R^[[43;1R,relatime 0 0
tmp /tmp tmpfs rw,nosuid,nodev,relatime,mode=777 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
root:/>
Case 10 ...PASS
ls /sys/power
pm_async pm_freeze_timeout state wakeup_count
root:/>
ase 11 ...PASS
spawn /bin/bash
^[[43;1Rtest@linux83-bf609-usbhost:~/workspace/src/kernel/label/BF609-EZKIT-USBHOST/testsuites/power_usbhost$ su
Password:
root@linux83-bf609-usbhost:power_usbhost#
Case 12 ...PASS
[6necho mem > /sys/power/state
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.013 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)

Case 13 ...PASS
Test case 1: Sleeping...
reset_board 4
powering OFF board attached to printer port pin 4
powering ON board attached to printer port pin 4

Case 14 ...PASS
musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_suspend (88, <avalid), retry="" #0,="" port1="" 00000507="" pm:="" suspend="" of="" devices="" complete="" after="" 5.516="" msecs="" late="" 1.904="" noirq="" 2.000="" resume="" 1.354="" early="" 1.058="" usb="" 1-1:="" reset="" high-speed="" device="" number="" 2="" using="" musb-hdrc="" 241.498="" restarting="" tasks="" ...="" disconnect,="" done.="" root:=""> usb 1-1.3: USB disconnect, device number 3
usb 1-1.4: USB disconnect, device number 4
usb 1-1: new high-speed USB device number 5 using musb-hdrc
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected</avalid),>

Case 15 ...PASS
^[[43;9Rusb 1-1.3: new high-speed USB device number 6 using musb-hdrc
usb-storage 1-1.3:1.0: USB Mass Storage device detected
scsi host1: usb-storage 1-1.3:1.0
usb 1-1.4: new high-speed USB device number 7 using musb-hdrc
stmmaceth stmmaceth.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
scsi 1:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 4.05 PQ: 0 ANSI: 2
sd 1:0:0:0: [sda] 3999373 512-byte logical blocks: (2.04 GB/1.90 GiB)
scsi 1:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 4.05 PQ: 0 ANSI: 2
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] No Caching mode page found
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI removable disk
mount -t ext2 /dev/sda1 /mnt
root:/>
...
Case 55 ...PASS
^[[43;1Rusb 1-1.3: new high-speed USB device number 18 using musb-hdrc
usb-storage 1-1.3:1.0: USB Mass Storage device detected
scsi host5: usb-storage 1-1.3:1.0
usb 1-1.4: new high-speed USB device number 19 using musb-hdrc
stmmaceth stmmaceth.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
scsi 5:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 4.05 PQ: 0 ANSI: 2
sd 5:0:0:0: [sda] 3999373 512-byte logical blocks: (2.04 GB/1.90 GiB)
scsi 5:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 4.05 PQ: 0 ANSI: 2
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] No Caching mode page found
sd 5:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 5:0:0:0: [sda] Attached SCSI removable disk
mount -t ext2 /dev/sda1 /mnt
root:/>
Case 56 ...PASS
mount
rootfs on / type rootfs (rw)
devtmpfs on /dev type devtmpfs (rw,relatime,mode=0755)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
mdev on /dev type tmpfs (rw,nosuid,relatime,mode=0755,size=10M)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
var on /var type tmpfs (rw,relatime)
tmp on /tmp type tmpfs (rw,nosuid,nodev,relatime,mode=777)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/sda1 on /mnt type ext2 (rw,relatime,errors=continue)
root:/>
Case 57 ...PASS
^[[43;1Rtime dd conv=fsync if=/dev/zero of=/mnt/5m.bin bs=1M count=5
^[[43;2R5+0 records in
5+0 records out
real 0m 1.23s
user 0m 0.00s
sys 0m 0.22s
root:/>
ase 58 ...PASS
ntime cat /mnt/5m.bin > /dev/null
real 0m 0.08s
user 0m 0.00s
sys 0m 0.07s
root:/>
Case 59 ...PASS
^[[43;9Rrm /mnt/5m.bin; sync
root:/>
Case 60 ...PASS
umount /mnt
root:/>
Case 61 ...PASS
ls /mnt
root:/>
Case 62 ...PASS

PM test case 1 round 5 pass

Wake up pass

Case 63 ...PASS
Ending ./power_usbhost_test.exp

power usbhost fails while power core case pass on bf609.

Buildroot Linux distribution for ADI Blackfin and future processors.

Found in Release

Searches

Help

#252 power usbhost fails while power core case pass on bf609.

Booting kernel from Legacy Image at 01000000 ...

Discussion

Booting kernel from Legacy Image at 02000000 ...