Fail to run tftlcd test in bf609-ezkit as can not find module bf609_nl8048 in latest trunk.
--
Linux version 3.15.0-ADI-2014R1-pre-00348-gd899d99-dirty (test@linux83-bf609-usbhost) (gcc version 4.3.5 (ADI-master/git-a2bfd7b) ) #4 Sat Jun 21 19:39:40 CST 2014
register early platform devices
bootconsole [early_shadow0] enabled
ERROR: Not running on ADSP-BF609: unknown CPUID 0x0000 Rev 0.0
bootconsole [early_BFuart0] enabled
early printk enabled on early_BFuart0
Board Memory: 128MB
Kernel Managed Memory: 128MB
Memory map:
fixedcode = 0x00000400-0x00000490
text = 0x00001000-0x001f7750
rodata = 0x001f7774-0x002a19c0
bss = 0x002a2000-0x002b9ca4
data = 0x002b9cc0-0x002e4000
stack = 0x002e2000-0x002e4000
init = 0x002e4000-0x008a9000
available = 0x008a9000-0x07f00000
DMA Zone = 0x07f00000-0x08000000
Hardware Trace active and enabled
Blackfin support (C) 2004-2010 Analog Devices, Inc.
Compiled for ADSP-BF609 Rev 0.0
Blackfin Linux support by http://blackfin.uclinux.org/
Processor Speed: 500 MHz core clock, 125 MHz SCLk, 125 MHz SCLK0, 125 MHz SCLK1 and 250 MHz DCLK
NOMPU: setting up cplb tables
Instruction Cache Enabled for CPU0
External memory: cacheable in instruction cache
L2 SRAM : uncacheable in instruction cache
Data Cache Enabled for CPU0
External memory: cacheable (write-back) in data cache
L2 SRAM : uncacheable in data cache
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 32258
Kernel command line: root=/dev/mtdblock0 rw ip=10.100.4.50 earlyprintk=serial,uart0,57600 console=ttyBF0,57600 ip=10.100.4.50:10.100.4.174:10.100.4.174:255.255.255.0:"bf609-ezkit":eth0:off
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 120012K/130048K available (2009K kernel code, 168K rwdata, 680K rodata, 5908K init, 95K bss, 10036K reserved, 1024K DMA)
NR_IRQS:291
Configuring Blackfin Priority Driven Interrupts
Console: colour dummy device 80x25
Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
devtmpfs: initialized
Blackfin Scratchpad data SRAM: 4 KB
Blackfin L1 Data A SRAM: 16 KB (9 KB free)
Blackfin L1 Data B SRAM: 16 KB (16 KB free)
Blackfin L1 Instruction SRAM: 64 KB (49 KB free)
Blackfin L2 SRAM: 256 KB (256 KB free)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
Blackfin DMA Controller
ezkit_init(): registering device resources
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-bfin-twi i2c-bfin-twi.0: Blackfin on-chip I2C TWI Contoller, regs_base@ffc01e00
i2c-bfin-twi i2c-bfin-twi.1: Blackfin on-chip I2C TWI Contoller, regs_base@ffc01f00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
PTP clock support registered
NET: Registered protocol family 23
Switched to clocksource bfin_cs_cycles
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
msgmni has been set to 234
io scheduler noop registered (default)
bfin-uart: Blackfin serial driver
bfin-uart.0: ttyBF0 at MMIO 0xffc02000 (irq = 88, base_baud = 7812500) is a BFIN-UART
console [ttyBF0] enabled
console [ttyBF0] enabled
bootconsole [early_BFuart0] disabled
bootconsole [early_BFuart0] disabled
bootconsole [early_shadow0] disabled
CAN device driver interface
bfin_can bfin_can.0: bfin_can device registered(®_base=ffc00a00, rx_irq=47, tx_irq=48, err_irq=49, sclk=125000000)
stmmaceth stmmaceth.0: no reset control found
stmmac - user ID: 0x10, Synopsys ID: 0x36
Ring mode enabled
DMA HW capability register supported
Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported (type 2)
Wake-Up On Lan supported
Enable RX Mitigation via HW Watchdog Timer
libphy: stmmac: probed
eth0: PHY ID 20005c90 at 1 IRQ 0 (stmmac-0:01) active
usbcore: registered new interface driver usb-storage
input: bfin-rotary as /devices/platform/bfin-rotary/input/input0
i2c /dev entries driver
bfin_wdt: initialized: timeout=20 sec (nowayout=0)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
eth0: device MAC address 02:80:ad:20:31:e8
dma_alloc_init: dma_page @ 0x04ed1000 - 256 pages at 0x07f00000
IP-Config: Complete:
device=eth0, hwaddr=02:80:ad:20:31:e8, ipaddr=10.100.4.50, mask=255.255.255.0, gw=10.100.4.174
host="bf609-ezkit", domain=, nis-domain=(none)
bootserver=10.100.4.174, rootserver=10.100.4.174, rootpath=
Freeing unused kernel memory: 5908K (002e4000 - 008a9000)
BusyBox v1.22.1 (2014-06-21 04:35:28 CST) hush - the humble shell
root:/>successful boot attempt ifconfig eth0stmmaceth stmmaceth.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
10.100.4.50
root:/> Ethernet may has been activated already!
random: nonblocking pool is initialized
version
kernel: Linux release 3.15.0-ADI-2014R1-pre-00348-gd899d99-dirty, build #4 Sat Jun 21 19:39:40 CST 2014
toolchain: /home/test/workspace/src/kernel/label/BF609-EZKIT-USBHOST/output/host/usr/bin/bfin-linux-uclibc-gcc release gcc version 4.3.5 (ADI-master/git-a2bfd7b)
user-dist: release git-9ae1e48, build #1 Sat Jun 21 04:41:19 CST 2014
root:/> ^[
Linux version: 3.15.0-ADI-2014R1-pre-00348-gd899d99-dirty
GCC version: 4.3.5 (ADI-master/git-a2bfd7b)
user-dist version: git-9ae1e48
** STEP 3: Start testing.
[6n
root:/> modprobe bf609_nl8048
modprobe: module bf609_nl8048 not found in modules.dep
root:/>
Case 1 ...PASS
Case 1 ...PASS
lsmod
Module Size Used by
root:/>
Last passed time: 2014-02-17_20-02-16
User-dist commit ce7c544a8dc80998e14833beafa606b2437017e7
Kernel commit 895019c5d53552f25d1f143e34a1361c93dc2c9d
Testsuites commit 7f7bd768548ddc88dc4e12c33eabe5e5531ef206
--
Still get error info:
--
Linux version 3.15.0-ADI-2014R1-pre-00351-g25640a2-dirty (test@linux83-bf609-usbhost) (gcc version 4.3.5 (ADI-master/git-a2bfd7b) ) #4 Thu Jun 26 15:16:14 CST 2014^M
register early platform devices^M
bootconsole [early_shadow0] enabled^M
ERROR: Not running on ADSP-BF609: unknown CPUID 0x0000 Rev 0.0^M
bootconsole [early_BFuart0] enabled^M
early printk enabled on early_BFuart0^M
Board Memory: 128MB^M
Kernel Managed Memory: 128MB^M
Memory map:^M
fixedcode = 0x00000400-0x00000490^M
text = 0x00001000-0x001f7750^M
rodata = 0x001f7774-0x002a19d8^M
bss = 0x002a2000-0x002b9ca4^M
data = 0x002b9cc0-0x002e4000^M
stack = 0x002e2000-0x002e4000^M
init = 0x002e4000-0x008ab000^M
available = 0x008ab000-0x07f00000^M
DMA Zone = 0x07f00000-0x08000000^M
Hardware Trace active and enabled^M
Blackfin support (C) 2004-2010 Analog Devices, Inc.^M
Compiled for ADSP-BF609 Rev 0.0^M
Blackfin Linux support by http://blackfin.uclinux.org/^M
Processor Speed: 500 MHz core clock, 125 MHz SCLk, 125 MHz SCLK0, 125 MHz SCLK1 and 250 MHz DCLK^M
NOMPU: setting up cplb tables^M
Instruction Cache Enabled for CPU0^M
External memory: cacheable in instruction cache^M
L2 SRAM : uncacheable in instruction cache^M
Data Cache Enabled for CPU0^M
External memory: cacheable (write-back) in data cache^M
L2 SRAM : uncacheable in data cache^M
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 32258^M
Kernel command line: root=/dev/mtdblock0 rw ip=10.100.4.50 earlyprintk=serial,uart0,57600 console=ttyBF0,57600 ip=10.100.4.50:10.100.4.174:10.100.4.174:255.255.255.0:"bf609-ezkit":eth0:off^M
PID hash table entries: 512 (order: -1, 2048 bytes)^M
PID hash table entries: 512 (order: -1, 2048 bytes)^M
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)^M
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)^M
Memory: 120004K/130048K available (2009K kernel code, 168K rwdata, 680K rodata, 5916K init, 95K bss, 10044K reserved, 1024K DMA)^M
NR_IRQS:291^M
Configuring Blackfin Priority Driven Interrupts^M
Console: colour dummy device 80x25^M
Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)^M
pid_max: default: 32768 minimum: 301^M
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)^M
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)^M
devtmpfs: initialized^M
Blackfin Scratchpad data SRAM: 4 KB^M
Blackfin L1 Data A SRAM: 16 KB (9 KB free)^M
Blackfin L1 Data B SRAM: 16 KB (16 KB free)^M
Blackfin L1 Instruction SRAM: 64 KB (49 KB free)^M
Blackfin L2 SRAM: 256 KB (256 KB free)^M
pinctrl core: initialized pinctrl subsystem^M
NET: Registered protocol family 16^M
Blackfin DMA Controller^M
ezkit_init(): registering device resources^M
SCSI subsystem initialized^M
usbcore: registered new interface driver usbfs^M
usbcore: registered new interface driver hub^M
usbcore: registered new device driver usb^M
i2c-bfin-twi i2c-bfin-twi.0: Blackfin on-chip I2C TWI Contoller, regs_base@ffc01e00^M
i2c-bfin-twi i2c-bfin-twi.1: Blackfin on-chip I2C TWI Contoller, regs_base@ffc01f00^M
pps_core: LinuxPPS API ver. 1 registered^M
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it^M
PTP clock support registered^M
NET: Registered protocol family 23^M
Switched to clocksource bfin_cs_cycles^M
NET: Registered protocol family 2^M
TCP established hash table entries: 1024 (order: 0, 4096 bytes)^M
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)^M
TCP: Hash tables configured (established 1024 bind 1024)^M
TCP: reno registered^M
UDP hash table entries: 256 (order: 0, 4096 bytes)^M
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)^M
NET: Registered protocol family 1^M
msgmni has been set to 234^M
io scheduler noop registered (default)^M
bfin-uart: Blackfin serial driver^M
bfin-uart.0: ttyBF0 at MMIO 0xffc02000 (irq = 88, base_baud = 7812500) is a BFIN-UART^M
console [ttyBF0] enabled^M
console [ttyBF0] enabled^M
bootconsole [early_BFuart0] disabled^M
bootconsole [early_BFuart0] disabled^M
bootconsole [early_shadow0] disabled^M
CAN device driver interface^M
bfin_can bfin_can.0: bfin_can device registered(®_base=ffc00a00, rx_irq=47, tx_irq=48, err_irq=49, sclk=125000000)^M
stmmaceth stmmaceth.0: no reset control found^M
stmmac - user ID: 0x10, Synopsys ID: 0x36^M
Ring mode enabled^M
DMA HW capability register supported^M
Enhanced/Alternate descriptors^M
Enabled extended descriptors^M
RX Checksum Offload Engine supported (type 2)^M
Wake-Up On Lan supported^M
Enable RX Mitigation via HW Watchdog Timer^M
libphy: stmmac: probed^M
eth0: PHY ID 20005c90 at 1 IRQ 0 (stmmac-0:01) active^M
usbcore: registered new interface driver usb-storage^M
input: bfin-rotary as /devices/platform/bfin-rotary/input/input0^M
i2c /dev entries driver^M
bfin_wdt: initialized: timeout=20 sec (nowayout=0)^M
usbcore: registered new interface driver usbhid^M
usbhid: USB HID core driver^M
TCP: cubic registered^M
NET: Registered protocol family 17^M
can: controller area network core (rev 20120528 abi 9)^M
NET: Registered protocol family 29^M
can: raw protocol (rev 20120528)^M
can: broadcast manager protocol (rev 20120528 t)^M
can: netlink gateway (rev 20130117) max_hops=1^M
eth0: device MAC address 02:80:ad:20:31:e8^M
dma_alloc_init: dma_page @ 0x04edc000 - 256 pages at 0x07f00000^M
IP-Config: Complete:^M
device=eth0, hwaddr=02:80:ad:20:31:e8, ipaddr=10.100.4.50, mask=255.255.255.0, gw=10.100.4.174^M
host="bf609-ezkit", domain=, nis-domain=(none)^M
bootserver=10.100.4.174, rootserver=10.100.4.174, rootpath=^M
Freeing unused kernel memory: 5916K (002e4000 - 008ab000)^M
^M
^M
BusyBox v1.22.1 (2014-06-26 01:15:00 CST) hush - the humble shell^M
^M
root:/>
root:/> ^[[6nmodprobe bf609_nl8048^M
bf609_nl8048 bf609_nl8048.2: Can't start LCD^M
platform bf609_nl8048.2: Driver bf609_nl8048 requests probe deferral^M
root:/>
root:/>
Case 1 ...PASS
Case 1 ...PASS
^[[6nbf609_nl8048 bf609_nl8048.2: Can't start LCD^M
lsmod^M
platform bf609_nl8048.2: Driver bf609_nl8048 requests probe deferral^M
Module Size Used by^M
bf609_nl8048 4013 0 ^M
cfbfillrect 2803 1 bf609_nl8048^M
cfbcopyarea 2547 1 bf609_nl8048^M
cfbimgblt 1520 1 bf609_nl8048^M
root:/> ^[[6nb
Case 2 ...PASS
Case 2 ...PASS
f609_nl8048 bf609_nl8048.2: Can't start LCD^M
modprobe ad7879-spi^M
platform bf609_nl8048.2: Driver bf609_nl8048 requests probe deferral^M
bf609_nl8048 bf609_nl8048.2: Can't start LCD^M
platform bf609_nl8048.2: Driver bf609_nl8048 requests probe deferral^M
root:/> ^[[6nbf609_nl8048 bf609_nl8048.2: Can't start LCD^M
platform bf609_nl8048.2: Driver bf609_nl8048 requests probe deferral^M
bf609_nl8048 bf609_nl8048.2: Can't start LCD^M
platform bf609_nl8048.2: Driver bf609_nl8048 requests probe deferral^M
--
Also fix build script to enable SPI_ADI for bf609.