Search Results for "gtk-sharp-2.12.10.win32.msi"
Sort By:
Showing 112 open source projects for "gtk-sharp-2.12.10.win32.msi"
View related business solutions-
Deploy Red Hat Ansible Automation Platform on Microsoft Azure for a strategic automation solution that allows you to orchestrate, govern and operationalize your Azure environment.
-
The only software you need to increase cash flow, optimize resource utilization, and take control of your assets and inventory.
-
1
Units.NET
Makes life working with units of measurement just a little bit better
Add strongly typed quantities to your code and get merrily on with your life. No more magic constants found on Stack Overflow, no more second-guessing the unit of parameters and variables. Get all the common units of measurement and the conversions between them. It is lightweight and thoroughly tested. 100+ quantities with 1200+ units generated from JSON by C# CLI app. 8000+ unit tests on conversions and localizations. Conforms to Microsoft's open-source library guidance. SourceLink to step... -
2
IEDExplorer
IEC61850 IED Explorer in .net
IEDExplorer is an IEC 61850 client tool written for testing and educational purposes. IEDExplorer can connect to an IEC61850 device (also called an IED) over MMS (ISO/IEC9506-1 and ISO/IEC 9506-2) communication protocol. The tool is written in pure C# including the MMS ASN.1 parser (based on BinaryNotes ASN.1 tool) and runs in .net environment, on Windows. Linux/Mono support has been lost on the way (volunteers welcome). See Features for what the tool can do for you. I will appreciate... -
3
QTester104
IEC 60870-5-104 protocol tester.
This software implements the IEC60870-5-104 protocol (client side) for substation data acquisition and control via tcp/ip network using the QT UI Framework. It can be compiled on Linux and Windows platforms. It's possible to poll and view data from the remote system (RTU) and also send commands. >>> Have a look also at my new SCADA project here: https://github.com/riclolsen/json-scada -
4
Tiny Multi Bootloader+
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its... -
BackBox seamlessly integrates with network monitoring and NetOps platforms and automates configuration backups, restores, and change detection. BackBox also provides before and after config diffs for change management, and automated remediation of discovered network security issues.
-
5
jDiskMark
Java Disk Benchmark Utility
...://sourceforge.net/projects/jdiskmark/files/jDiskMark-0.5.1.msi/download Verify your download with SHA-256 Hash: D8EE4181D42B0CEF4806BF903EE9EF44722DB54C6C7F9EEBAC8BE119BB7AF753 Instructions to verify file SHA-256 signature: https://sourceforge.net/p/jdiskmark/wiki/%20Verifying%20SHA-256%20Hash%20on%20Windows%20with%20PowerShell/ ZIP releases: * v0.5-v0.5.1 requires Java 21 * v0.1-v0.4 requires Java 8 NOTE: run as administrator or w sudo to automatically drop disk cache -
6
ExpSuite is a software framework for applications to perform psychoacoustical experiments. ExpSuite allows acoustic and electric stimulation for normal hearing and cochlear implant listeners, respectively.
-
7
A2L Build for MCD - AutoExtractGui
Build A2L from ELF for Automotive MCD tool (e.g. INCA)
1. A2L Builder : AutoExtractGui This tool is to help Measurement & Calibration people (e.g. INCA users) create their own A2L easily. - Please describe the MEMORY SEGMENT : this is mandatory part. - Optionally you may describe formula / min / max / unit / ... for variables. - Optionally you may describe communication specification like XCP, CCP, CAN BPS, ... - Press "Build New A2L" button to make a new A2L for the given ELF file. As a reference, you may see how this tool... -
8
SpectrumViewer for Windows
Continuous display of audio spectrum from PC input or wave file
Reads audio from Windows audio interface or wave file and creates a continuous spectrum display. Command line support for generating sine, square, triangle and sawtooth wave files. Uses biquad IIR digital filters for frequency detection, plus digital lowpass filters for output extraction. Highly configurable. 60+ FPS with suitable hardware. Manual or automatic gain control. -
9
Ada industrial control widget library
A GUI library for designing gauges, meters, oscilloscopes, plotters
... for WYSIWYG design of complex dashboards. The software is based on GtkAda and cairoada, the Ada bindings to GTK+ and cairo. -
Calmerry is beneficial for businesses of all sizes, particularly those in high-stress industries, organizations with remote teams, and HR departments seeking to improve employee well-being and productivity
-
10
COM port notifier
System tray tool to show the available COM ports with friendly names
A tool for technicians who use USB-to-Serial converters to connect to various devices (PLCs, Frequency converters etc.). Many of the end-device supplied tools will show you all the possible COM ports on your system, and give you a headache to find which COM port belongs to your USB-to-Serial converter. This tool will help you by listing the COM ports with friendly names (as defined in the device driver). A notification with the list of COM ports will pop up at connecting a USB-to-Serial... -
11
Gwyscope
Open hardware SPM controller with advanced sampling support.
Gwyscope is a low cost, open hardware, Digital Signal Processor (DSP) suitable for Scanning Probe Microscopy measurements, focusing on demonstrating the concept of adaptive scanning, general XYZ data acquisition and statistical data processing on the controller level. More details can be found in: M. Valtr et al., Scanning Probe Microscopy controller with advanced sampling support, HardwareX, Volume 15, e00451 https://www.hardware-x.com/article/S2468-0672(23)00058-5/fulltext It... -
12
MeaProcess
Measurement and Automation Framework + Tool
MeaProcess is a simple and graphical based Measurement and Automation framework and Tool. Support programming with IEC 6-1131.3 ST. Runtime available for Windows, embedded RT-Linux and other realtime OS. -
13
CoolingPower
Print Steam Tables; Plot diagrams and cycles from equations of state
CoolingPower is NOT in a condition for use at this time. A couple of bugs have been discovered that severely affect the calculation accuracy. While I troubleshoot, use at your own risk. Once completed, CoolingPower will have the capability to plot diagrams of thermodynamic properties, construct Steam Tables, and plot thermodynamic cycles. Initial fluid will be water/steam, but functionality will extend to include a variety of working fluids. CoolingPower operates in GUI format and, for... -
14
hcfr
Free Video Projector/Monitor Calibration Software
Video Projector/Monitor Calibration Software orginally developed as ColorHCFR. This code base is based off version 2.1 and will aim for a more open development process. The opensource version integrates an ArgyllCMS interface for continued meter support and development. If you feel the program has been of value to you since I started working on it about 3 years ago please consider a contribution via the link below. Thanks! -zoyd https://www.paypal.me/zoyd -
15
Laser Flash Method
Measurement of specific heat and thermal diffusivity of materials
This program is designed to measure thermophysical properties of materials (thermal diffusivity and specific heat) by the laser flash method. A huge thanks to ULVAC RICO Inc.(Japan), whose equipment is still in operation and for which this program is implemented. The measurements are performed by a multifunctional analog input board PCI-1710UL (ADVANTECH, Taiwan), which is used as a variable-frequency signal recorder (in range 40 Hz – 40 KHz). The program is designed for simultaneous use... -
16
Flexi Serial Terminal
Configurable RS232 Serial Communication Terminal
Serial terminal for test, measurement and debugging of RS232 serial communication devices. This utility presumes the following settings for RS232 communication: - Eight data bits and one stop bit. - No parity bits and hardware control. -
17
Computer programs for application in Sports science, Physical Culture, among others. By Enrique R.P. Buendía Lozada. buendiaenr@gmail.com , Benemérita Universidad Autónoma de Puebla (BUAP), México. (Software without any warranty).
-
18
ExpTimer
An easy-to-use timer to facilitate complex, multi-step protocols.
ExpTimer is developed as an easy-to-use timer to facilitate complex, multi-step experimental protocols. The advantages of ExpTimer are that it takes away the fiddling around with typical lab timers, which have to be reset after each action, and at the same time it shows you what to do next. You just enter your own protocol, press “start” and you do not have to worry about timers anymore, especially when you already have your hands full with your protocol. If something goes wrong during your... -
19
Uptime Desktop Overlay
Uptime Desktop Overlay
Displays the Uptime of the Windows PC on a Overlay -
20
Heat Wizard
thermocouple voltages to temperatures converter
Heat Wizard converts thermocouple voltages to temperatures and back. -
21
DataLogChanger
an CSV / ASCII Data Log file converter.
DataLogChanger can be used to convert huge ASCII Data Log files (i.e. .CSV format) into a format for further use in other tools. I started to invent this tool when I wanted to use 4Gigasamples Oscilloscope log files for plotting and as PWL input in SPICE simulations. It was impossible due to the filesize and resolution. * in- and output file size is virtually unlimited * very fast (>100k lines per second processing speed) * Easy selection of source file name * Selectable destination... -
22
BMI Wizard
BMI Wizard calculates the body mass index (BMI)
BMI Wizard calculates the body mass index (BMI) from weight and size and vice versa. -
23
-
24
CANStream
An applicaton for CAN bus coms development, testing and validation
CANStream is a .NET application intended to be used for CAN (Controller Area Network) bus communication development, testing and validation. CANStream allows to extensively test any system using CAN communication by sending and receiving CAN frames. Thanks to its powerful built-in mathematical expression evaluator, CANStream can also behave as a real control system feeding back the test device or commanding a third party device with context sensible data. Extended data logging and data... -
25
PPMScope
Microcontroller based PC Oscilloscope
PPMScope is a do-it-yourself oscilloscope with an open source design. The intent is that the project can be constructed by an electronics hobbiest using the instructions included. The design is a compromise between features and cost. The bandwidth is lower than a commercial scope, so it's use is limited to signals of 500 kHz and below. It's sample buffer is also smaller than a commercial scope, however sufficient for most oscilloscope functions. This is a version based on the...