Search Results for "sensor data"

GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. Continues to support Geiger counters like GQ Electronic's...

A Signal Acquisition, Visualization & Analysis software application: * Signals, as in analog sensor data * Acquisition, as in data sampling/capturing/recording * Visualization, as in plotting raw/processed data * Analysis, as in live/post data processing Capabilities: The software has build in support for National Instruments Daq equipment (NI-DAQ) or it can load external source scripts (python), for customizable data sources. ...

itom is an open source software suite for operating measurement systems, laboratory automation and data evaluation. One main application of itom is the development and operation of sensor and measurement system for instance in a laboratory environment. Therefore, the software has to be able to communicate with a wide range of different hardware systems, such as cameras or actuators and should provide a diversified and as complete as possible set of evaluation and data processing methods. ...

Gwyscope is a low cost, open hardware, Digital Signal Processor (DSP) suitable for Scanning Probe Microscopy measurements, focusing on demonstrating the concept of adaptive scanning, general XYZ data acquisition and statistical data processing on the controller level. More details can be found in: M. Valtr et al., Scanning Probe Microscopy controller with advanced sampling support, HardwareX, Volume 15, e00451 https://www.hardware-x.com/article/S2468-0672(23)00058-5/fulltext It is based on a low cost FPGA board Red Pitaya and additional high bit depth AD and DA converters. ...

A distributed network of sensors with a central data store, to record environmental data. Project goals include: * to serve as a teaching outlet for: ** sensor programming ** distributed data collecting ** web APIs ** database ** web UI for numerical data ** graphing data sensibly It also gives me some infotainment in new (to me) technologies, and as an excuse to scatter ever more Raspberry Pis around my home.

#ESP.Meteo: Solar Wi-Fi weather station on ESP12 + ionistor + solar panel Current Functionality: *Forecasting the probability of frosts (according to the methods of Professor Brounov) *Forecast of the height of the lower edge of the cloud (VNGO by Selezneva) *Calculation of the height of the sensor according to the barometric formula (altimeter, for other projects) *Measurement of street temperature *Measurement of outdoor humidity *Measurement of street pressure *Calculation of the dew point *Monitoring of voltage on ionistors (charge-discharge control) *Monitoring the opening of the box flap with potatoes *Monitoring the system time-out every 5 minutes (operating time ~ 480 ms) *Monitoring the temperature on the balcony (the ability to connect up to 16 sensors DS18B20: 2 groups of 8 sensors per two APIKEY) *Sending data to the Thingspeak cloud *Sending data to Twitter

WeatherMonitoringStation is BeagleBone/Embedded Linux based software written in C++ intended to read, monitor, share and display environmental data such as temperature, humidity, wind speed etc. At this stage of development, temperature is measured using a DS18B20 sensor and sent out via standard output and/or a TCP/IP connection. Additional features will be implemented in due time. Recommended setup: * Eclipse with CDT. * GNU toolschain for ARM. * Oscilloscope. * Open collector buffer as described in AVR318 (http://www.atmel.com/images/doc2579.pdf)...

Intel's PTU utility is for stressing a system's CPU and RAM. Along with PTU, an executable named ptumon will output sensor data at a rate of once per second. This data runs together and in order to be charted needs to be parsed. This tool works with the PTU tool for the Romley platform.

WSNWARE is an open source Java/OSGi middleware, designed for monitoring, controlling and standardizing Wireless Sensor Network. WSNWARE is a normalized message oriented middleware running on (and developed for) any OSGi containers.