Search Results for "i2c"
Sort By:
Showing 36 open source projects for "i2c"
View related business solutions-
Build Securely on AWS with Proven FrameworksMoving to the cloud brings new challenges. How can you manage a larger attack surface while ensuring great network performance? Turn to Fortinet’s Tested Reference Architectures, blueprints for designing and securing cloud environments built by cybersecurity experts. Learn more and explore use cases in this white paper.
-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
1
GeigerLog
Python program for Geiger counters and Environmental Sensors
...Continues to support Geiger counters like GQ Electronic's GMC-300/500/600 , RadMon, RadPro, Gamma-Scout, audio-click and other low-cost Geiger counters, IoT devices, I2C based sensors, GQ EMF devices. GeigerLog reads data from devices, saves them to databases, prints to screen and plots as auto-updated, customizable graphs. Quality control using Statistics, Scatter, Poisson, FFT & Autocorrelation, and more. Gamma Spectra - can be displayed, calibrated, and evaluated in GeigerLog! The Raspberry Pi 4, 5 qualify as GeigerLog hosts. -
2
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
3
Arduino mySQM Sky Quality Meter
mySQM powered by Arduino Nano
A sky quality meter based on TLS237 and Arduino Nano. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Code or portions of code may not be copied or used without appropriate credit given to author. For a WiFi ESP32 much improved version please see https://sourceforge.net/projects/mysqmproesp32/ AUTHOR NOTE: HIGHLY RECOMMEND YOU USE AN ARDUINO MEGA FOR THIS PROJECT IF ALL OPTIONS ARE CHOSEN YOU CAN RUN OUT OF CODE SPACE ON A NANO -
4
Monsputer project
Documentation for the Z80 monsputer
The Monsputer is a Z80 computer developped with old chips (and some new) collected over the years. It has about 2M memory, clocks at 4.0MHz, has serial ports, 1 parallel port, 1 CAN bus, 2 SPI, 1 I2C, a RTC and other features. It supports interrupts mode 2 but not DMA. -
Stop Cyber Threats with VM-Series Next-Gen Firewall on AzureGain integrated visibility across all traffic in a single pass. Deploy Palo Alto Networks VM-Series to determine application identity and content while automating security policy updates via rich APIs.
-
5
Arduino Nano Dew Controller Pro (DIY)
Dew Controller Feature Rich
A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older... -
6
uEZ
Open Source middleware platform with FreeRTOS, processor abstraction
...The .7z download is a much smaller file size. https://sourceforge.net/p/sevenzip/ uEZ v2.15.000 updates: Crossworks v5.1, IAR v9.60.3, MbedTLS/CorePKCS11 v3.6.2 with TSL 1.3, full FTP Server, FreeRTOS v11.0.1, auto-expanding heap, time.h include workaround uEZ v2.16.000 updates: Crossworks v5.3, IAR v9.70.2, emWin v6.50, MbedTLS v3.6.5, FreeRTOS v11.2.0, RTT/SystemView Multi-Core support uEZ v2.16.001 updates: Apply this patch over uEZ v2.16.000 to get new SPI flash and I2C external RTC drivers -
7
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
8
octave-raspberrypi
GNU Octave toolkit for controlling a Raspberry Pi
Basic Octave implementation of the matlab raspi extension, allowing communication to a Raspberry Pi board to control its hardware. -
9
ESP8266 Arduino Core
ESP8266 core for Arduino
...It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS servers; and it can perform OTA updates. ESP8266 Arduino core works with SD cards, servos, SPI and I2C peripherals. -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
10
jfModbusServer
Modbus server designed for Raspberry PI to control GPIO/I2C devices.
jfModbusServer is a Modbus Server for the Raspberry PI 2/3. Remotely access GPIO pins and read/write I2C devices. Requires Java. -
11
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple testing and develop user-specific graphical interface products. ... -
12
FabGL
ESP32 Display Controller (VGA, PAL/NTSC Color Composite, SSD1306, ST77
FabGL is mainly a Graphics Library for ESP32. It implements several display drivers (VGA output, PAL/NTSC Color Composite, I2C and SPI displays). FabGL can also get input from a PS/2 Keyboard and a Mouse. FabGL implements also: an Audio Engine (DAC and Sigma-Delta), a Graphical User Interface (GUI), a Game Engine and an ANSI/VT Terminal. VGA output requires an external digital-to-analog converter (DAC): it can be done by three 270 Ohm resistors to have 8 colors, or by 6 resistors to have 64 colors. ... -
13
PJON
Experimental, arduino-compatible, multi-master, multi-media network
...PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP, MQTT and ESPNOW. PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. It was originally developed as an open-source alternative to i2c and 1-Wire but during development, its scope and features have been extended to cover use cases where IP is generally applied. PJON has been engineered to have a variable footprint (4.2-8.2 kB program memory) and overhead (5-35 bytes per packet) depending on its configuration. -
14
raspberry-gpio-python
A Python module to control the GPIO on a Raspberry Pi
...If you are after true real-time performance and predictability, buy yourself an Arduino! (see http://www.arduino.cc ) Note that the current release does not support SPI, I2C, 1-wire or serial functionality on the RPi yet. This is planned for the near future - watch this space! -
15
xSMBus - Java I2C/SMBus API
USB Bridge for SMBus(I2C), GPIO, and Clock, Java API
...The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus all devices Interactive - enter interactive mode File - You can use the executable script to attach files Reset - restart xBridge-M01 You may refer to xBridge that is based on this API https://xbridge-m01.doidx.com You can buy the product from: - China, https://shop255163877.taobao.com - Taiwan, you can buy on https://www.ruten.com.tw/user/index00.php?... -
16
Alios Things
AliOS Things latest version
AliOS Things was released at the 2017 Hangzhou Yunqi Conference. It is a highly scalable IoT operating system under the AliOS family for IoT. It was announced as open-source on GitHub on October 20, 2017. The latest version is AliOS Things 3.3. AliOS Things supports multiple CPU architectures, including ARM, C-Sky, MIPS, RISCV, etc. AliOS Things adapts layered architecture and component architecture. Alibaba's value-added and commonly used IoT components, including LinkSDK, OTA (safety... -
17
DIY Arduino Boards IO I2C
DIY Arduino Boards for IO using port expanders and I2C
DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code -
18
openMAS
Opensource hardware platform for Arduino and Raspberry Pi
openMAS is an open source hardware platform based on DIN41612. Different boards can be used as controllers (Arduino, RaspberryPi, Nucleo, NI-Hardware). The modular construction converts your µ-controller board into an extensible measurement and automation system. For more information: openmas.de The english page is not ready, please use the german version. Have a lot of fun, openMAS-Team -
19
Arduino Si4735 radio library
Arduino and Silicon Laboratories Si4735 radio library
This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features. -
20
Asphyre
Asphyre is a cross-platform framework for Delphi and FreePascal.
...The framework provides facilities for real-time rendering of graphics (using DirectX, OpenGL or Software Renderer), text output, mathematics (including vectors and matrices) and networking communication, among other features. It also supports singleboard devices such as Raspberry PI, Intel Galileo, BeagleBone Black and others with features like GPIO, SPI, I2C and so on, along with external displays, sensors and other peripheral devices. -
21
i2cnet
An i2c to TCP/IP adaptor to allow easy remote control of an i2c bus.
This project was created to make i2c programming easier and platform independent. It is targeted toward the raspberry PI but it should work on any linux playform. By abstracting the use of an i2c bus behaind a TCP/IP socket, it becomes possible to create and test applications on any platform with a TCP/IP stack. Useage: 1. Install i2c-tools: apt-get install i2c-tools 2. -
22
BlackLib
Beaglebone Black C++ Library
...It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library. -
23
Tutorial de como utilizar SDCC con el PIC18F4550. Incluir ejemplos de funciones particulares: adc, spi, i2c, usart, usb, atención a interrupciones etc.
-
24
tbb is a simple command line interface for FT232R and FT245R Bit Bang Mode. Since version 0.02, I2C host emulation command tbbi2c added. And since version 0.05, you can build the binaries for mac, linux and windows (experimental).
-
25
ADS1115 I2C XBee
ADS1115 component for XBee Codewarrior
The project's main goal is to create a component, capable of being added to Freesacle's Codewarrior environment with XBee stack, in order for adding a complete implementation of the ADS1115 functionalities to Digi's XBee radios
