Search Results for "ATmega"

FlashForth is a standalone Forth system for the Microchip PIC 18, 24, 30, 33 and the Atmel Atmega series of microcontrollers. A Forth system with interpreter, compiler, assembler and multitasker is provided.

amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. The Risc-V and ARM architectures are ascending. Turnkey actions for IoT workloads are possible as well. The command language is close to the Forth 2012 standard.

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases.

PJON® (Padded Jittering Operative Network) is an experimental, Arduino-compatible, multi-master, multi-media, software-defined network protocol that can be easily cross-compiled on many microcontrollers and real-time operative systems like ATtiny, ATmega, SAMD, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Zephyr, Linux, Windows x86, Apple and Android. PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP, MQTT and ESPNOW. PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. ...

...The ESP will open up a Wi-Fi access point and host a web interface from which you can upload and manage your scripts. When you hit run, it will send the script to the ATmega, which then will execute it on the target machine.

Super lightweight task scheduler aimed at 8 bit AVR ATmega micro-controllers (perfect for Arduino), although it can easily be used on other hardware like Microchip PIC. It uses simple round-robin scheduling so no priority levels can be set. You choose the time interval by calling dispatchTick(), this is usually in a timer interrupt. Range for number of tasks: 0 to 255 tasks Range for delay: 0 to 65535 ticks Each task only uses 5 byte of RAM.

Project aims to provide simple but extensible implementation of 'slave' (i.e. monitor side) DDC/CI protocol on AVR ATmega microcontrollers. Current functionallity includes brightness control with DDC/CI and hardware buttons. Requires at least 4K flash, hardware TWI.

Have you ever tried to control a self developed vehicle with your PC? This Project provides a GUi Controll, the schematics for the on board electroninc (including the xbee host) and the atmega 32 / 644 / 2550 software to get things work together.

This project is about using a SD-card together with an ATMEL ATmega32 microcontroller as mass storage medium. It implements the interface to the SD-card, a simplified FAT16 filesystem and a sample application: a data logger.

The Yakko project is a home automation system. It defines a new protocol implemented as firmware running in AVR atmega microprocessors. The goal is to build a method to make logical connections between hardware devices such as lamps, switchers and so on.

PLCduino is an open hardware alternative for industrial and home automation. It uses the well known ATmega chips as main processor, the same used on Arduino. This means that PLCduino is code-compatible with all arduino sketches.