Search Results for "spi"
Sort By:
Showing 20 open source projects for "spi"
View related business solutions-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
Host LLMs in Production With On-Demand GPUsDeploy your model, get an endpoint, pay only for compute time. No GPU provisioning or infrastructure management required.
-
1
ESP32 Bit Pirate
A Hardware Hacking Tool with Web-Based CLI That Speaks Every Protocol
ESP32 Bit Pirate is open-source firmware that turns supported ESP32 devices into portable hardware development and analysis tools. Inspired by the Bus Pirate, it communicates with digital buses such as I2C, SPI, UART, 1-Wire, CAN, and direct GPIO. It also supports wireless and radio technologies including Wi-Fi, Bluetooth, Sub-GHz, RFID, infrared, and RF24. Users can interact through a USB serial terminal, a Wi-Fi web command line, or a standalone screen and keyboard on compatible hardware. The firmware can sniff traffic, send data, read memory devices, scan interfaces, manipulate pins, and automate operations with scripts. ... -
2
ESP32-Paxcounter
Wifi & BLE driven passenger flow metering with cheap ESP32 boards
...Therefore, Paxcounter does not persistently store MAC addresses and does no kind of fingerprinting the scanned devices. Data can either be stored on a local SD-card, transferred to the cloud using LoRaWAN network or MQTT over TCP/IP, or transmitted to localhost using serial (SPI) interface. LED Matrix display (similar to this 64x16 model, can be ordered on Aliexpress). SD-card (see section SD-card here) for logging pax data. -
3
ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.
-
4
uEZ
Open Source middleware platform with FreeRTOS, processor abstraction
...The .7z download is a much smaller file size. https://sourceforge.net/p/sevenzip/ uEZ v2.15.000 updates: Crossworks v5.1, IAR v9.60.3, MbedTLS/CorePKCS11 v3.6.2 with TSL 1.3, full FTP Server, FreeRTOS v11.0.1, auto-expanding heap, time.h include workaround uEZ v2.16.000 updates: Crossworks v5.3, IAR v9.70.2, emWin v6.50, MbedTLS v3.6.5, FreeRTOS v11.2.0, RTT/SystemView Multi-Core support uEZ v2.16.001 updates: Apply this patch over uEZ v2.16.000 to get new SPI flash and I2C external RTC drivers -
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
5
eCxx
A C++ library for AVR and NodeMCU
NOTE: This project is marked with 'Status: Abandoned' on SourceForge because not enough time can be dedicated to this project. However it may still get sporadic commits to the repository. eCxx is a library for AVR and NodeMCU tailored for micro LED displays and lighting effects. eCxx is utilizing Makefile build system. Java and Python based applications/tools are also included to ease the development and debugging process using the host PC. On one side, eCxx supports the original... -
6
ESP8266 Arduino Core
ESP8266 core for Arduino
...It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS servers; and it can perform OTA updates. ESP8266 Arduino core works with SD cards, servos, SPI and I2C peripherals. -
7
FabGL
ESP32 Display Controller (VGA, PAL/NTSC Color Composite, SSD1306, ST77
FabGL is mainly a Graphics Library for ESP32. It implements several display drivers (VGA output, PAL/NTSC Color Composite, I2C and SPI displays). FabGL can also get input from a PS/2 Keyboard and a Mouse. FabGL implements also: an Audio Engine (DAC and Sigma-Delta), a Graphical User Interface (GUI), a Game Engine and an ANSI/VT Terminal. VGA output requires an external digital-to-analog converter (DAC): it can be done by three 270 Ohm resistors to have 8 colors, or by 6 resistors to have 64 colors. ... -
8
rims-arduino-library
Recirculation infusion mash system library for Arduino
This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is... -
9
DHT22-MQTT-Sensor-ESP8266 (NodeMCU)
Use DHT22 temperature / humidity sensor on NodeMCU (ESP8266) with MQTT
This is a Sketch for the arduino IDE to enable the usage of a DHT22 sensor connected to a NodeMCU (ESP8266) with MQTT. Also supported are 2 status LED's and a SPI diaplay. After start the sensor device, there will be a Wifi-AP for configuration purposes. After successfully configuration, the sensor is connected as a Wifi-client and send the temperature and humidity data via MQTT within the given intervall. During AP-mode and client-mode, there are some RESTful functions (HTTP-requests) available, for configuration and retrieving information. -
Veeam Data Platform v13.1Try Veeam Data Platform today. Experience the unified platform that's secure by design, portable by default, and proven to recover clean, fast, and anywhere.
-
10
EtherCard
EtherCard is an IPv4 driver for the ENC28J60 chip
...Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. An interrupt pin is not required. Any Arduino IDE >= 1.0.0 should be fine. EtherCard is available for installation in the Arduino Library Manager. Alternatively, it can be downloaded directly from GitHub. -
11
Arduino Si4735 radio library
Arduino and Silicon Laboratories Si4735 radio library
This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features. -
12
MSP430 C Code Library
Library of peripheral drivers, component drivers, utilities, and more!
A collection of C libraries for the TI MSP430 family of microcontrollers. -
13
AVR32 Ecos
Ecos for AVR32 targets
...Ecos-3.0 – ecos + AVR32UC3C port source files. Hellow_Examples – example project in Atmel studio 6.2 with, ADC test, LED and push buttons test, internal FLASH test, external SPI Atmel Data FLASH test, AST wallclock test and USB tests for AT32UC3C-EK board. This project contains all necessary ecos headers and library to be compiled and linked in Atmel studio. -
14
BlackLib
Beaglebone Black C++ Library
BlackLib library is wrote for controlling Beaglebone Black's feature. It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library. -
15
Tutorial de como utilizar SDCC con el PIC18F4550. Incluir ejemplos de funciones particulares: adc, spi, i2c, usart, usb, atención a interrupciones etc.
-
16
eckit
E85 conversion kit for gasoline cars
My project of ethanol conversion kit for gasoline cars. Project is based on firmware for bioadapter, but here i design my own HW. Biggest advance is use of temperature sensor to modify cranking maps in cold weather. -
17
ALLToolKit
Android Java Library for Hardware Management
This Android Library manages SPI, I2C, GPIO, ADC, UART and PWM in an Embeded System running Android.This library allows you to write Android applications that can use all hardware available in the system. -
18
Simple serial (SPI) programmer for small AVR MCUs written in C++ with Qt4 for Linux. PC interface is compatible with RS-232. HW consist of just a few transistors, resistors and diodes. SW is highly modular and quite simple to understand. Good luck !
-
19
The Project represents the graphic interface of programmer for Atmel microcontrollers. Owing to flexible technology of plug-ins, the interface can be easily adapted for microcontrollers of new types. The project is written in Visual C ++ and the assembler
-
20
PLCduino
Open Source PLC based on the arduino platform
PLCduino is an open hardware alternative for industrial and home automation. It uses the well known ATmega chips as main processor, the same used on Arduino. This means that PLCduino is code-compatible with all arduino sketches.
- Previous
- You're on page 1
- Next
