Search Results for "sensor" - Page 3
Sort By:
Showing 147 open source projects for "sensor"
View related business solutions-
Build Securely on AWS with Proven FrameworksMoving to the cloud brings new challenges. How can you manage a larger attack surface while ensuring great network performance? Turn to Fortinet’s Tested Reference Architectures, blueprints for designing and securing cloud environments built by cybersecurity experts. Learn more and explore use cases in this white paper.
-
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
1
Astroberry
Astroberry provides INDI drivers for various Raspberry Pi devices
...Astroberry provides INDI drivers for Raspberry Pi devices such us Astroberry Focuser - stepper motor driver with autospeed feature, Astroberry GPS - GPS driver for scope location and time synchronization, Astroberry AltIMU - accelerometer, magnetometer, gyro, atmospheric pressure sensor driver, Astroberry Board - power switch board allowing for remote powering on/off up to 4 devices. -
2
IrrigationController
Smart Home Irrigation System
The project contains the following modules: * Main Controller Module which is responsible for scheduling and switching the water pumps, monitoring the water level and temperature, and reading the Soil Moisture Sensors. The module has a 4 line alphanumeric LCD that makes the system easy to use. * Sensor Controller Module is attached to the Main Controller Module via RS232 interface. This module is the master controller for the Soil Moisture Sensors and also contains a Dallas 1-Wire interface for temperature sensors. * Soil Moisure Sensors are responsible for sensing if the soil of irrigated flowers are wet or not. These sensors are attached to the Sensor Controller Module via slow speed I2C bus. ... -
3
Honeeepi
Honeypot sensor on Raspberry Pi
This project is about building honeypots with Raspberry Pi - a credit card sized ARM Linux box. Honeeepi is a honeypot sensor on Raspberry Pi which based on customized Raspbian OS. It was pre-installed with multiple updated honeypot packages and network monitoring tools. -
4
An applet for the GNOME panel to monitor hardware sensor readings (temperature, voltage and fan) under Linux.
-
Go from Code to Production URL in SecondsSkip the Kubernetes configs. Cloud Run handles HTTPS, scaling, and infrastructure automatically. Two million requests free per month.
-
5
JSensor
high performance computing, Wireless Sensors Networks Simulators
...This way, we develop simulation models where entities, named sensors, collect environment data, process data, communicate, move around the space and a lot more. JSensor is a sensor network simulator implemented at Computer Science Department of Federal University of Ouro Preto (DECOM-UFOP), Brazil. In contrast to JSensor counterparts, it is designed to simulate millions of sensors in multicore and, in near future, multicomputer architectures. -
6
ESP Easy
Arduino IDE sketch for ESP8266 modules
Firmware for ESP8266 modules. http://www.esp8266.nu/index.php/Tutorial_ESPEasy_Firmware_Upload Use an ESP8266 module as a wireless sensor for temperature, humidity, barometric pressure, LUX, etc. Or use it as an actuator to control Relays. Supports the following Home Automation platform protocols: * Domoticz HTTP * Domoticz MQTT * OpenHAB MQTT * PiDome MQTT * Nodo Telnet * ThingSpeak webservice * EmonCMS * FHEM HTTP * Generic HTTP using templates Supported devices: * DS18B20 * DHT11 * DHT22 * BH1750 * BMP085 * Wiegand RFID * PN532 * SI7021 * TSL2516 * HCSR04 * TSOP4838 IR * MCP23017 * PCF8591 * PCA9685 * LCD and OLED displays * BME280 * INA219 * MLX90614 * ADS1115 * MSP5611 * BMP280 * SHT1x The ESP is web configurable for both Wifi setup and device configuration. ... -
7
Gigaset Elements command line interface
Python based command line interface for Gigaset Elements
gigasetelements-cli is a python based program which allows you to control your Gigaset Elements home security system. It comes with an easy to use CLI (command-line interface) suitable for direct use or cron jobs. -
8
openAlerts
The Internet of Things
The open source sensor network. Remotely monitor and control sensors over IP networks. Configure, control and monitor sensors from a web browser, receive e-mail and text message alerts, and trigger control commands based on sensor conditions. -
9
TemperatureMonitor
Embedded System based Temperature monitor
This is studying project in CUFE intended to develop a temperature and security system based on a microcontroller with a serial communication with PC The Embedded software is developed on AVR Atmega16 microcontroller while the PC user interface is programmed with C# .Net 4.5 Project Description: https://goo.gl/KK9Aqc -
Compliant and Reliable File Transfers Backed by Top Security CertificationsStop relying on non-certified, legacy file transfer tools that creak under the weight of modern security demands. Get full audit trails, advanced access controls and more supported by an award-winning team of experts. Start your free 25-day trial today.
-
10
TAP — The Aqua Project
A passive planet awaits one terribly impending water scarcity.
...Essentially motivated by an imminent threat in the city where I live, São Paulo, the TAP software intends to connect people who need water to the parts able to quickly provide it, such as water tank trucks. It is the offer of an additional way to avoid houses' tanks running out of water. TAP is sensor‑driven, e.g.: acting when a critical level is reached, providing people with alternative water supply from tank trucks nearby. On the other side, trucks have their logistics optimized, once their status information is shared. It is assumed a scenario with more than a thousand tank trucks, all of them equipped with GPS devices. -
11
This project is a low cost & lowpower Datalogger based on BeagleBone Black. The data logger is an electronic device that records earthquakes(Sensor network), Wind ,daylight ,power used/produced on the street lamp over time. Data will then be uploaded via a wireless radio MESH network(868 Mhz) to a database server for later analyze. The Prototype is developed on two microcontrollers(AVR and ARM Cortex-A8) with the low power and
-
12
Acronym for camera light sensor. A python program that calculates ambient brightness and sets screen's correct backlight using a camera.
-
13
PerLa project aims at defining a full declarative high level language that allows to query a pervasive system, hiding the difficulties related to the need of handling different technologies.
-
14
EthernetWeatherStation2
PIC based weather station
Microhcip PIC18F based LCD weather station that uses Ethernet connection to download data from the Internet. -
15
NexusDataLink
Connect, monitor and control your (embedded) systems remotely. m2m/IoT
Connect, monitor and control your systems or embedded devices remotely (m2m/IoT) - for example your Raspberry Pi. The communication interface is defined in XML automatically providing a REST interface. NexusDataLink integrates smoothly in existing software or firmware and significantly reduces connection- or communication-related source code. -
16
RPI-UV1
Raspberry Pi based small drone
Code to support a small drone based on a Raspberry Pi with a Smart Car motorized chassis, L298N dual motor controller, an HC-SR04 ultrasonic rangefinder, Microphone and Obstacle sensor from the SunFounder 12 sensor kit, micro contact switches as touch sensors, white LEDs as lights for image illumination, and a Pi camera module. -
17
Raspberry Pi based Honeypots
Raspbian with pre-installed kippo, dionaea and glastopf honeypots
Setting up honeypots like glastopf can be tedious and time taking. Pi-pots are pre-loaded raspberry pi images and contain various honeypot clients (like kippo, dionaea and glastopf) and other softwares needed to run a honeypot sensor. A user may simply download these raspbian distributions and write it to the memory card. They can then setup a sensor in no time. Different versions of pi-pots bundle different software required by a sensor. Users are encouraged to go through the readme file for each version to best meet their requirements. -
18
Arduino fridge control
Refrigerator control by Arduino Pro Mini
Fridge control: with Arduino Pro Mini based, LM35 sensor, 2pcs 7segment display, shift registers, LEDs, momentary buttons, toggle switch, 1 Arduino compatible dou relay board. Features: - cooler on-off - auto anti ice control - defrost function Normal operation: Change cooler on and off temperature with buttons, Each "off" cycle follows a short de-ice cycle. Defrost function: Switch on and a off : several long de-ice cycle. -
19
...Front-end that fetches and draw the information in icons on the taskbar, refreshing the information every x programmed seconds. - can display up to 5 custom icons on the taskbar. - The information that can be displayed are: CPU temperature (TP sensor) CPU temperature (AXP209 sensor) Hard Disk Temperature (you must have sata disk). Current CPU Frequency. Free memory% Used memory% - Personalized icons, background color and text color. - Can display diferent colors, in 3 ranges programmed temperatures. - Show Farenheit or Celsius temperature. - Temperature alarm option when the highest programmed range is reached (a simple stupid hint is showed)...
-
20
eckit
E85 conversion kit for gasoline cars
My project of ethanol conversion kit for gasoline cars. Project is based on firmware for bioadapter, but here i design my own HW. Biggest advance is use of temperature sensor to modify cranking maps in cold weather. -
21
Code Red Sim
A low-power ISA design and simulator for a 2010 IEEE competition
This is a student project designed to compete in the 2010 IEEE Computer Society Student Competition: http://www.computer.org/portal/web/competition/2010competition The Code Red architecture is designed for extremely lower power environments, like distributed sensor networks. Included is a design of that architecture, a Java-based simulator, an implementation (without vector instructions) designed as a Logisim circuit (http://ozark.hendrix.edu/~burch/logisim/), and more. The name "Code Red" comes from our team name, the Red Team. Since the competition dictated a small team size, our professor split the class and gave each group a color. ... -
22
Network Signature Manager (N.S.M) Lite
Manage your Snort rules with N.S.M.
N.S.M Lite is a simple and easy way to manage your signatures for your Snort based IDS/IPS implementation, which can improve IDS/IPS signature development for accurate detection of malicious malware. Additionally, N.S.M can be used a learning tool to help you understand the complex nature of Intrusion Detection and/or Prevention (IDP) signatures for the Snort platform. -
23
GEMS IoT
IoT Device, Gateway, Server platform
Bi-directional Wireless Sensor Line Protocol(Bi-WSLP) is a sensor network communication protocol based on a line topology, which is common in outdoor monitoring cases for IoT(Internet of Things). Bi-WSLP runs fast and provides a response rapidly, yet it takes a small code size occupies small memory. Bi-WSLP can be easily ported to various hardware platforms because it is coded in C, which is the most popular programming language for embedded systems. -
24
yieldbuddy
yieldbuddy - an Arduino and Raspberry Pi based Environment Controller
yieldbuddy is an open source hydroponics controller for your indoor or outdoor grow. The Arduino sends multiple serial messages a second containing information like sensor values, relay on/off states, manual/auto modes, etc. The web interface (hosted by the Raspberry Pi running Apache2 and PHP5), allows you to login to the page and from there you can see graphs of all your sensors, their current values, whether or not your equipment is on/off (relay states), your web camera, etc. The Raspberry Pi runs a python script to receive serial messages from the Arduino, interpret them, and log all the necessary data into an SQL database. ... -
25
fslurp
Fronius data tool for Linux
fslurp is a program to pull the data from a Fronius inverter systems via a serial port connection. It supports both single and multiple inverter systems through the Interface Card Easy and the Fronius Interface Card/DataLogger Box. Fronius Sensor Card devices are also supported. It supports both human-readable and delimited (CSV-style) text output. Sample output can be seen by building project and exercising one of the test simulator targets (e.g. simIFCEasy). It is written in C++ and has been compiled on Linux.
