Open Source Hardware Platforms - Page 5

Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client.

LibusbJava is a Java wrapper for the libusb. It can be built on any platform which is supported by the libusb. The latest binaries for Windows and Linux can be downloaded. For installation instructions and more information visit our homepage.

Firmware and schematic for a USB HID compatible remote control consumer device using an Atmel AVR Atmega8. No drivers are needed for WindowsXP / WMP10 / Vista / Windows 7. Press Play/Stop/Pause and control media player directly from your remote control.

SANE backend and stand-alone driver for Canon CanoScan parallel scanners (FB320P, FB620P, FB330P, FB630P, N340P, and N640P). Please note FB310P is NOT currently supported, sorry. For USB model support go to http://canon-fb630u.sourceforge.net/

The project maily focuses on integrating H.264 on IBM CELL platform.

Open source, cross platform drivers and function library for the NovInt Falcon Haptic Controller. These drivers are not produced by Novint Technologies, Inc. and do not come with any warranty as to their correctness or usage.

SeaBreeze is a device driver library that provides an interface to select Ocean Optics spectrometers. It is written in C/C++ and builds and runs on Windows (XP/7/8), MacOSX, and Linux (x86/x64/ARM).

A virtual floppy drive that mounts image files (*.img) as new browseable computer resources. Tested from WinXP (32bit) to Win7 (64bit). Derived from: https://sourceforge.net/projects/vfd/

This project makes it possible to switch 8 LEDS over a USB connection. It indicates the CPU work or animations. The following page contains the schematic, firmware ... http://www.cesko.host.sk/IgorPlugUSB_RS232/IgorPlug-USB%20(AVR)%20RS232_eng.htm

This is a library for easy accessing chip cards /smart cards via a chipcard reader. It currently works under Linux, FreeBSD and Windows. It is tested with Towitoko and Kobil readers.

Pancham is an IP core that implements the MD5 message digest algorithm. It is written in Verilog and comes with a testbench. It will be portable across multiple simulators and will be synthesizable.

[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple testing and develop user-specific graphical interface products. xSmbus-xx, xBridge-xx do not need to install the driver according to the operating system in advance, nor select the COM port requirement, as long as they are in the Java environment, they can be plug and play. You can buy the product from: - China, https://shop255163877.taobao.com - Taiwan, you can buy on https://www.ruten.com.tw/user/index00.php?s=doidx

Full functional PS/2 keyboard on Atmega16, works with simple circuits, and fully customizable. Performs really great! - ps2 / keyboard / ps2avr / controller / avr / hardware

This utility is used to create/maintain ROM images for flashing to the Ultimate 1MB device. It's main purpose is to customize your U1MB device to your needs.

A 32-bit MIPS simple single cycle processor based on triadic Harvard architecture with a RISC-like ISA. This project is done in Cairo University-Faculty of Enigneering, Electronics and Electrical Communication department (EECE-2017)

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.

Agnix is an educational, network operating system kernel. It is ideal starting point to learn about operating systems. The main goal of the project is to provide a network kernel fully compatible with the Linux Kernel in the system call layer

This Java program calculates the SPBRG value for a given baud rate (Baudrate) and clock frequency. It comes with a graphical interface and a simple value interpretation guide. A Java Webstart file (.jnlp) is provided.

A collection of VIs for easier interface with basic CANopen client operations such as SDO download, SDO upload and PDO messages. Helper VIs for arbitrary mapping of dictionary objects to specific PDOs are also implemented. The project includes a quite crude implementation of the DSP 402 profile for handling motor drives in velocity and/or in position mode.

xfer9860 works with the fx-9860G (AKA Graph85) versions of Casio's graphing calculators. It allows you to transfer files to your calculator, and works on platforms where libusb is available - including Linux and Windows.

"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface. The project "kmicommbusmediator" provides connectivity for the "Raspberry Pi" to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Link to the project "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ Application software for CommBusTerm: * "cbmedimonitor" (see "kmicommbusmediator") * "WaveProgEdit": sound-program editor * "WaveBackup": backup tool * "waveaddsynth": tool for additive synthesis Copyright (C) 2022-2024 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. See disclaimers below and within the distribution. (We are not affiliated in any way with companies/persons mentioned on this page. All brand names and trademarks are property of their respective owners. The author is not affiliated with PPG. "CommBusTerm" is not a product by PPG.)

HAC4Linux is a bicycle computer application for Linux. This programme is also available for Win32 (HAC4Windows) and MacOSX(HAC4Mac). Supported are different bicycle computers and heart rate monitors by different manufacturers.

Java based library for processing framework to support Korg USB/MIDI controllers (keyboard, surfaces et.c)

Library was merged: NiboRoboLib C and C++ library for the NIBObee robot. The library contains wrappers to access the hardware of the ATmega16

C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.