Open Source C Hardware Platforms - Page 3

A port of the Linux operating system kernel and assorted GNU userspace to the GameCube and Wii gaming consoles from Nintendo. Please, see http://www.gc-linux.org for additional information.

A simple fan control program. Read temperatures, check them against configured limits and switch to appropriate (also pre-configured) fan level. Requires a working thinkpad_acpi or any other hwmon driver that enables temperature reading and fan control from userspace.

Based on tom and roland from wingmanteam work. This is a tool that log the usb data exchange between hardware and device driver!

serialconsole (sc) is a minimal terminal program allowing to use one machine to access the serial console of another machine.

Serial line sniffer (slsnif). slsnif is a serial port logging utility. It listens to the specified serial port and logs all data going through this port in both directions.

Please find the linuxwacom project's new home on Github: https://linuxwacom.github.io/ Previous Description: This project manages the libraries, configuration, and diagnostic tools for Wacom tablets running under Linux. It also maintains updated Linux kernel drivers and Xorg/XFree86 XInput drivers.

library to drive several displays (with built-in controllers or display modules, a.s.o.)

LinK+ IDE is a simple IDE for Linux Kernel Developers and Lovers. It is based on Eclipse IDE customized for Linux kernel programming. It reduces the development time and executes code in an elegant fashion. This IDE supports Linux kernel configuration, compilation & emulation, system call development and device driver development. LinK+ IDE includes various templates in the category of character, block and network device driver subsystems for device driver development. It includes various bus infrastructure templates and also provides Linux device driver code completion, code assistance & code navigation for developers. Download - LinK+ IDE for 32 & 64-bit architecture : https://sourceforge.net/projects/linkplustest/files/installers/ LinK+ Update Site (compatible with Eclipse IDE v3.6.x ): http://sourceforge.net/projects/linkplustest/files/repository/ User Manual: http://sourceforge.net/projects/linkplustest/files/documentation/LinK%2B_UserManual_Rev4.pdf

HWSensors is a software bundle that includes drivers and applications that allow you to access information from hardware sensors available on your Mac. FakeSMC is an open source SMC device driver/emulator developed by netkas (http://netkas.org/). NOTE: FakeSMC & Plugins starting from v915 provide additional sensors information to HWMonitor then running on Macs. By installing FakeSMC on real Mac you should consider you know what you are doing and how to recover your system if something will goes wrong. All repositories: Sourceforge, sources & downloads: https://sourceforge.net/projects/hwsensors/ BitBucket, sources & downloads: https://bitbucket.org/kozlek/hwsensors/overview Assembla, sources: https://www.assembla.com/code/fakesmc/git/nodes GitHub, sources: https://github.com/kozlek/HWSensors HWSensors Project (c) 2014 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan and others. All rights reserved.

Win NT/2K/XP, and Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4li

A daemon for X11, which watches for mouse wheel actions and outputs them as keypresses. It can be configured separately for different windows. It also allows input from it's own (included) gpm, or from jamd, or from XFree86 ZAxis mouse wheel conversio

Please note that OWFS source code, and all Issue/Tickets/merge requests have now been moved to https://github.com/owfs/owfs/. Developer mailing lists will still be kept at Sourceforge. ---- OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. The interface is very flexible -- everything from a web browser, to read and writing directly to the chip's "file" to integrating with your programs -- even over the internet. There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc

Drivers for the HP (previously Compaq) Smart Array controllers which provide hardware RAID capability. Hardware info: https://www.hpe.com/us/en/product-catalog/servers/smart-array-controllers-and-smart-host-bus-adapters.hits-12.html

USBView is a GTK program that displays the topography of the devices that are plugged into the USB bus on a Linux machine. It also displays information on each of the devices. This can be useful to determine if a device is working properly or not.

Emu10k1 sound driver

The spacenav project provides a free compatible alternative, to the proprietary 3Dconnexion device driver and SDK, for their 6dof space navigation input devices. It provides both a replacement free user-space driver, and a replacement SDK library.

acsccid is a PC/SC driver for Linux/Mac OS X and it supports ACS CCID smart card readers. This library provides a PC/SC IFD handler implementation and communicates with the readers through the PC/SC Lite resource manager (pcscd).

Tools for flashing Rockchip devices.

ThinkFinger is a driver for the UPEK/SGS Thomson Microelectronics fingerprint reader (USB ID 0483:2016).

This project's purpose is to provide and enhance USB support in Linux. This repository will be used to store Linux-USB developer source files.

Gammu is a cellular manager for mobile phones/modems. It contains libraries and functions for ringtones,logos,phonebook,SMS,etc. (used by external software), a command line version (with backup/restore) and SMS gateway (with MySQL and PostgreSQL supp

The Photon uses an ARM Cortex M3 CPU based microcontroller. All of the code is built around the GNU GCC toolchain offered and maintained by ARM. The build requires version 5.3.1 20160307 or newer of ARM GCC and will print an error message if the version is older than this. In order to turn your source code into binaries, you will need a tool called make. Windows users need to explicitly install make on their machines. Make sure you can use it from the terminal window. The entire Particle firmware is contained in this repository. The main user code sits in the application.cpp file under firmware/user/src/ folder. Unless you know what you are doing, refrain from making changes to any other files. After you are done editing the files, you can rebuild the repository by running the make command in the firmware/main/ directory. If you have made changes to any of the other directories, make automatically determines which files need to be rebuilt and builds them for you.

A GPU memory test utility for NVIDIA and AMD GPUs using well established patterns from memtest86/memtest86+ as well as additional stress tests. The tests are designed to find hardware and soft errors. The code is written in CUDA and OpenCL.

Hotplugging is a facility that supports dynamic (re)configuration of GNU/Linux distributions by kernel reports to user mode "agent" software.