Search Results for "devices-mapper"
Sort By:
Showing 34 open source projects for "devices-mapper"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
1
PICSimLab - Prog. IC Simulator Lab.
PICSimLab is a realtime emulator for PIC, Arduino, STM32, ESP32, ...
...For boards based on the PIC16F and PIC18F microcontrollers, the wizard generates projects that utilize MPLAB X. For boards based on AVR, STM32, and ESP32, the wizard generates projects that utilize VSCode+PlatformIO. PICSimLab supports several devices (spare parts) that can be connected to the boards for simulation. Such as example LEDs and push buttons for simple outputs and inputs and some more complex ones like the ethernet shield. -
2
IDCS-unisim
Emulates a set of UniDrive motor controllers for IDCP
unisim emulates a set of UniDrive motor control devices for the Insertion Device control program IDCP. With unisim you can run and test the Insertion Device Control System on your Linux PC. -
3
vdrive-HZB
An generic emulation of motor drives.
vdrive provides virtual drives. These are simulated motor drives that can be used in an application that simulates a devices that has motors that need to be controlled. A vdrive has the following basic properties: - position - velocity - status: stopped or moving - destination and the following extra properties: - a brake that is active or released - an activation flag - a maximum movement time - a name A vdrive can receive a *command*. -
4
GridLAB-D is a new power system simulation tool that provides valuable information to users who design and operate electric power transmission and distribution systems, and to utilities that wish to take advantage of the latest smart grid technology. It incorporates advanced modeling techniques with high-performance algorithms to deliver the latest in end-use load modeling technology integrated with three-phase unbalanced power flow, and retail market systems. Historically, the inability...
-
One Monitoring Tool for IT, OT and Cloud | Free TrialModern infrastructure spans data centers, cloud platforms and factory floors, and every blind spot between them is a risk. PRTG supports SNMP, WMI, SSH and other standard protocols to monitor IT, OT and hybrid environments through one customizable dashboard. Build the views your team needs, from network health to application performance, without switching tools. Try PRTG free for 30 days now.
-
5
simutron
AVR simulator IDE
Electronic circuit simulator. Simple environment to run and debug firmware for AVR 8-bit microprocessors. Able to run arduino firmware. Internally this program uses the open source Simavr AVR Processor Simulator (https://github.com/buserror/simavr) and wraps all its functions in a GUI shell. Setups for firmware debugging scenarios can be created dynamically. Able to run 16MHz MCU with decent set of external parts in real time. In particular this can be used for development of CNC firmware... -
6
Integrated Development Environment for some microcontrollers based on 8051(e.g. AT89S8253). Supported languages are Assembly and C. It has its own simulator, assembler, editor and many other tools. See the project web site for more details and the newest updates.
-
7
iqr is a simulation software to graphically design and control large-scale neuronal models. Simulations in iqr can control real-world devices in real-time. iqr can be extended by new neuron, and synapse types, and custom interfaces to hardware.
-
8
PMCGPU
Parallel simulators for Membrane Computing on the GPU
Membrane Computing is a new research area (within Natural Computing) that aims to provide computing devices abstracted from the functioning and structure of living cells. These devices are called P systems. The objective of this project (PMCGPU) is to bring together all the researchers working on the development of parallel simulators for P systems, specially those using the GPU (e.g. CUDA, OpenCL, etc). Other parallel platforms are also welcome (multicore and manycore, FPGAs, etc). ... -
9
The openFuelCell project is a forum to develop open source computational fluid dynamics (CFD) software to model fuel cells. Fuel cells http://en.wikipedia.org/wiki/Fuel_cell are devices that convert hydrogen and oxygen to water and electricity, and are promising renewable energy conversion devices. Computational fluid dynamics tools are used to size and rate fuel cell systems. OpenFoam is an open source CFD toolbox, available for downloading at http://www.openfoam.com/, written in C++ and conforming to the object-oriented paradigm.
-
Demo Series - Small Business Backup By VeeamWatch this on-demand demo series and learn how to protect your Microsoft 365 data with clear, simple, actionable steps that are easy to implement for businesses of all sizes.
-
10
WireFactory Simulator
Small factory simulator for control logic test purpose
...You can build your own factory and controller. The controller can be implemented on any programming language. WFS was originally built to simulate the action of an IEC 614999 application. So, the devices in the factory are easily connected to IEC 61499 applications. The WFS were mainly tested with FBDK (http://www.holobloc.com/). Wire Factory has been implemented to help to test more complex automation systems during a doctorate course under guidance of: Supervisor: Prof. Dr. Roberto Silvio Ubertino Rosso Jr. Co-Supervisor: Prof. ... -
11
OpenRTDynamics
A framework for implementing real-time control systems
- - - T H I S P R O J E C T M O V E D T O G I T H U B - - - A framework for the implementation of advanced real-time control systems which uses signal/block-based schematics (like Simulink) extended by several features like state machines and online-exchangeable sub-simulations. Besides, this framework properly handles multiple threads, their communication, allows to synchronise control systems to external events (e.g. variable timers or incoming network packages) and provides... -
12
SoftIB Serial Communicator
UART communications with data flow monitoring
A simple to use serial communication software for communicating with other serial, MCU and Arduino. The SoftIB Serial Communicator communicates with other Serial devices that use a simple asynchronous communication using only the RX and TX signals without any control signals. The application was developed based on the communication with microcontrollers, but it can be used in all other cases. -
13
experix laboratory control system
instrument control, data acquisition display and analysis
...Written in C for GNU-Linux . Tested on PC and Raspberry Pi. The core is written very generally in order to support applications by means of script files. Device interfaces: PCMCIA daq (2 devices tested) via kernel module with interrupt handler and memory-mapped data; USB daq (1 device tested) using libusbx; running an equipment servicing program via pipes. Interfaces accessible via commands and scripts: file i/o modelled on stdio and stdlib; usb control and bulk transfers; socket operations; webcam; graphics via framebuffer. ... -
14
GMES
GMES is a free Python package for FDTD electromagnetic simulations.
GMES is a free finite-difference time-domain (FDTD) simulation Python package developed at GIST to model photonic devices. Its features include simulation in 1D, 2D, and 3D Cartesian coordinates, distributed memory parallelism on any system supporting the MPI standard, portable to any Unix-like system, variuos dispersive ε(ω) models, CPML absorbing boundaries and/or Bloch-periodic boundary conditions, and arbitrary material and source distributions. -
15
Factory Hardware Emulator
Emulate MODBUS industrial network with devices.
FactoryController testing/verification tool. Simulate MODBUS-TCP industrial network with set of devices. Update 2017: Hardware Emulator project has been integrated to main FactoryController codebase and this repository is obsolete. -
16
ViennaMag
Macro/Micro Magnetic Simulator
ViennaMag is an open-source marco/micromagnetic simulator for modeling of nano-sizes magnetic devices. ViennaMag allows modeling of device operation under spin-current influence as well as under magnetic field. Thereby, this simulator is aimed to calculate magnetodynamics of devices including but not limited to magnetic memory (STT-MRAM, MRAM), spin-torque nano-oscillators, spin logic devices and etc. Such contributions to the effective magnetic field as the external field, magnetic anisotropy field, exchange field, demagnetizing field, the thermal field, the Ampere field, and the magnetostatic coupling field between the pinned (fixed) layer and the free layer are considered and incorporated. -
17
The ACTIVE-IST project is a set of libraries (e.g. JAUS SDK) for rapid development of cross-platform applications with Unmanned Systems using the JAUS Standard (AS5710, AS6009), Simulations, Human-Interface Devices, and more.
-
18
FPGA remote lab
Laboratory for remote practices in FPGA devices
The design of an open platform devoted to allow students perform distance practices with a real FPGA device involves both hardware and software components. -
19
This is a bubble tubes (waterpas) application with a photorealistic EFL-based GUI for handheld devices with accelerometers. It reads data from accelerometers, determines orientation of device and makes moving bubbles in tubes.
-
20
-
21
...The new tool, SNL-EFDC, is an augmented version of US EPA’s Environmental Fluid Dynamics Code (EFDC) and includes; (1) a new module that simulates energy conversion (momentum withdrawal) by MHK turbine-like devices including commensurate changes in the turbulent kinetic energy and turbulent kinetic energy dissipation rate, (2) new, advanced sediment dynamics routines, and (3) augmented water quality modules. SNL-EFDC has been verified and validated against flume measurements of flow around sub-scale turbines and actuator disks.
-
22
A C# written application that simulates MODBUS devices in their serial ASCII, serial RTU and TCP communication modes. It uses NModbus libraries for message passing; mono framework and Gtk# bindings for the multi-platform GUI.
-
23
uspice (Micro-SPICE) is a very small simulator for electrical circuits. The primary platform are low-power devices, such as graphing calculators.
-
24
A collection of applets used to demonstrate physics and math principles. The applets include: a ray diagram drawing applet, a collision of disks applet, an electromagnetic field mapper and a 3d hydrogen orbital simulation.
-
25
The main goal of this project is the development of an IFX Transaction Switch that handle particular devices like an ATM (J/XFS compliant), POS in the future, and other devices that speak a common language: IFX
