Search Results for "linux command"

SerialToIP is a simple Terminal Server software providing transparent pipe either in TCP server or TCP client socket mode from TCP/IP to a pre-configured serial port. Implemented in C# for .NET 2.0 so the command line version could work in Mono-runtime as well.

JYMAG (Jig Your Music And Graphics) is a program for communicating with serial-port-based mobile phones. It is a free replacement for the Sagem mobile phone software, 'My Pictures and Sounds', and a general-purpose serial terminal. See the project homepage https://jymag.sourceforge.io and the project Wiki in the menu above.

RxtxConsole is an API and GUI software, developed by Doidx with JSerialCom as the kernel. It can be used for multi- UART/RS232 interface operation. The platform supports Windows/MAC/Linux. Note: Developed with Java17 Follow these steps step by step to apply RxtxConsole, 1. LIST, to obtain all Serial ports currently available on the system. 2. CONNECT, Select a Serial port for connection and place it in the connection pool for use...

This software, consisting of a daemon and a command shell, is meant to be used together with the Xtreme GM7 GPS tracker to help simplify its management and to make it possible to monitor alerts sent by the tracker. The software is intended to be run as a GNU/Linux service that always runs in the background and can be used to both receive location updates from a remote tracker as well as configuring the tracker (over both USB and a GPRS link to the device). All received events are stored...

Java implementation of the Omni-Link Serial Protocol and Network Protocol as well as the Omni-Link II Network Protocol as described in two separate specification documents released by Home Automation Inc (HAI).

This project provides three different interfaces for programming embedded chips: a GObject based library (for developers), an executable binary (for computer geeks) and a GTK+3 front-end (for less geeky users). Actually NXP LPC and STM32 based chips are supported.

This program will read a file (or stdin) containing a list of AT commands. Each command will be send to the modem, and all the response for the command will be output to file (or stdout). Example, to hang up any ongoing call: $ echo ATH | atinout - /dev/ttyACM0 - ATH OK $

Serial ports are a classic way for computers and peripheral devices to communicate. Originally modems, printers and laboratory equiptment had serial ports. The serial ports were hardware chips with known addresses. Modern computers and devices often use USB to emulate serial communications. This works well, except the device has a serial address (e.g. ttyUSB0) and a USB address. tty2usb is a utility that probe system information to display the link between USB and serial addresses.

smartCOM is a graphical serial device terminal, it's an alternative to minicom. It is aimed mainly at hardware developers who need a gui test tools to talk to their custom hardware. The GUI is written using the wxWidgets library, and using the tinyxml to save or load config. http://gnssinfo.com/2012/11/21/wiki-smartcom/

This Linux script helps people learn how to program routers. It has a GUI and a terminal that can be used simultaneously. GUI command output appears on the terminal, along with the results. The terminal is always available and interactive.

Redirects incoming commands from COM1 to the command prompt and returns results from command prompt back out COM1. This is primarily useful for automation of Windows servers via console in Linux virtualization environments(ex: KVM, XEN, etc.)

Shooting Chrony Data Downloader, a program that allows downloading of data acquired by the device

This is an implementation of the ymodem protocol for serial transfer of data implemented using python.

jpnevulator - just another serial sniffer

yet another PalmOS serial browser, primarily for GPS receivers. he consists of several distinct applications (like ZboxZ), so he is rather slow, but flexible. nauta can be used as a serial logger for multiple simultaneous channels.

ttytest is a simply testcom-like console, async, miltithreaded tool for serial lines checking in loopback/stub/terminal modes

uGNU/RTOS (literally "micro G'Noo RTOS") is an Open Source serial Real Time OS for microcontrollers (PIC, ATMEL).

se290 is a tool for uploading files into Sony Ericsson(tm) phones.

gives remote control of a PC running MS-DOS (which e.g. does not have a monitor display attached to it). The screen image (currently text mode only) is taken from the graphics card and transferred to other computer via serial link and displayed there

MuCTools is a group of command line utilities connect with Philips'P89C668 (8051 type) and other Philips microcontroller bootloaders, completing the 8051 development chain with free software for linux. muctools0.9 works with limited features. See README

A collection of tools to tokenize PBASIC source code and send it to a BASIC Stamp microcontroller.

Written in C++, IFI-picloader is a US First Competition Linux port for Innovation First Inc. Robot Controller programmer using a pic 18F8520. It writes MCC18 compiled hex files to PIC and allows users to program under *nix based operating systems.

The MtxOrbCtl program allows you to control a Matrix Orbital Serial LCD screen from the command line. It is designed to be used in conjunction with shell scripting to show the status of boots, etc.

Basic Stamp II Sending and Parsing Utility, As far as I know at the time of this posting, 3-3-2003 this is the only single application for linux that allows the user to complile and program the Basic Stamp II module in one command: i.e. Linstamp 0 myfile

Simple VA18B multimeter interface. It reads data trasmitted by USB/Serial interface of VA18B multimeter and can put them into a CSV file.