Search Results for "open programmer"

An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms

A database with a web interface for storing the experimental results of research, aimed at ease of adding new types of data. Goal is to make adding as simple as one day for an unexperienced in programming scientist to add a new type of data similar to an existing type, by preparing two - three files analogues to the existing ones. An experienced programmer should need only one day to one week for adding a totally new kind of data like arrays with more dimensions that was available before.

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

PonyProg is a serial device programmer based on some simple and cheap interfaces for the PC and a user friendly GUI available for WindowsXP/7/8/10 and Intel Linux. Its purpose is programming every serial device like eeproms and microcontrollers

USARSim (Unified System for Automation and Robot Simulation) is a high-fidelity simulation of robots and environments based on the Unreal Tournament game engine. It is intended as a research tool and is the basis for the RoboCup rescue virtual robot comp

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan.

A programmable signal generator and RF synthesizer for scientific experiments, especially quantum computing and quantum information processing. It includes hardware, firmware, software, and documentation, all under an open source license.

usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.

Willem Programmer with GUI.

UPDATE: After some bug fixes, I've ditched Pysimony for Javamony: https://sourceforge.net/projects/javamony/ Given Python's beauty, I know that someday I will have to finish Pysimony. A student's first attempt at a phylogenetic inference program, written in the simplistic yet elegant Python. Pysimony reads a FASTA file (only ATGC accepted) specified as its only argument. Basic testing has shown that it is slow, inaccurate and most definitely inefficient. An...

The C/C++ Program Perfometer is an open source tool which enables the programmer to measure the comparative performance of a C/C++ program or of separated pieces of code by one of several desired metrics: e.g., time, memory, or metrics defined by the prog

Do you need a centralized way to obtain in your linux machine, the records of different access control HandPunch units manufactured by http://www.handpunch.com ? handpunch try to implement some basic functionality for HandPunch biometric time clocks devices agree to the protocol specification binded by the manufacturer in http://www.handpunch.com/manuals/Hand_Reader_Technical_Manual_2.7.pdf compatible with Handpunch 2000, and handpunch 3000 NOTE: I think this is a beginning programmer code.

MathJax is a modular javascript framework for including mathematics in web pages. It can take input in various formats, like TeX and MathML, and can produce output in various forms, such as MathML or HTML-with-CSS. Components are loaded as needed.

Package with various tools for the programmer in UNIX environments. Contains classes for time measuring, image and file manipulation as well as arbitrary precision arithmetics.

This project is about enhancing user experience in wireless 802.15.4 chips through open source programmer, bootloader, flashing over the air, and viral flashing over WSN. Current development is done over CC2430 and STM32.

The Dragon Fire compiler takes a new, 21st century, look at the Dragon (i.e. Dragon Book). No longer impenetrable to the programmer, this compiler is open and available to them. You control the Dragon, and get Dragon insight into your programs.

The CodeTime platform covers every aspect of parallel software from authoring, through distribution, to run-time. Its goals are: high programmer productivity; write once, run high performance anywhere; and wide acceptance.

PICPrg is a fast Linux command line (or ncurses) program, to program any Microchip PIC microcontroller using the PC parallel port interface. Any parallel port PIC programmer hardware can be used, simply edit the configuration file or use the ncurses conf

Motorola HC08 (especially MC68HC908JB8) monitor-mode programmer project. Includes hardware part (RS-232 programmer design in Eagle) and software part (in C++ for KDE/Qt).

The GNU/Gtk BlowIt is a (E)EPROM programmer that currently supports AT89C2051 (mcs-51 compatible) microcontrollers, with plans to support other devices. The project was originally started by Ondrej Kolonicny.

FrAid(FRactal AID) is an interface to Java, allowing it to proc. math. data(functions/equations). A compl. standalone system utilizing the FrAid prog. lang. is available(no need to be Java programmer to use it!). Use instead of Matlab. High res. graphics

The TekBots Universal Programmer is a graphical application to program a variety of embedded hardware devices. Included protocols are Atmel AVR SPI, JTAG, and Cypress ISSP.

Java pic programmer for the pic 16F8X / 16F628 series pic chips. The programmer utilises the parallel port to interface with the pic programmers electronics. The Java programmer will initially be targeted at linux OS but, with help, hope to expand the to

Intend to reproduce most of the conversational programming functionality of the Fagor 8055TC lathe controller. Web browser interface for easy portability between different OS. Visit project web-site for demo.

InSystem Serial Programmer Fujitsu MCU F2MC-16LX and FR series.