Search Results for "commons-logging"

What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its...

PPMScope is a do-it-yourself oscilloscope with an open source design. The intent is that the project can be constructed by an electronics hobbiest using the instructions included. The design is a compromise between features and cost. The bandwidth is lower than a commercial scope, so it's use is limited to signals of 500 kHz and below. It's sample buffer is also smaller than a commercial scope, however sufficient for most oscilloscope functions. This is a version based on the...

A simple sieve/prefactor program for the so-called Eisenstein-Mersenne Primes: 3^p +- 3^((p + 1)/2) + 1. See http://oeis.org/A125738, A125739 and [1] for a good introduction. Some easily established properties are: p must be prime; sign is minus for p=+-1 (mod 12), plus otherwise; composites only have factors of form 6kp+1 (integer k). Related probable primes (3^p -+ 3^((p + 1)/2) + 1)/7 are sieved at the same time. See http://oeis.org/A125743, A125744. After sieving, the...

An experimental ISS for freescale's e500v2 core. It is meant to simulate only cpu and memory subsystem and is purely intended for academic/learning purposes only.

LabMonkey is a collection of designs for embedded devices which can be networked together to provide a range of automation, data logging and signal processing functions. A key design objective is to use as little dedicated hardware as possible for communication between nodes in the network, and to be able to adapt the network topology in real-time so as to minimize the occurrence of collisions between packets. To achieve this, a protocol has been designed specifically for the task, and implemented in assembler for AVR microcontrollers. ...