Search Results for "dc servo motor"

The DarkLight Cover/Calibrator, known going forward as DLC, is a Do-It-Yourself (DIY) solution using an Arduino Nano, servo motor, and if desired, an Electroluminescent (EL) Panel. This device, also known as a flip/flat panel, aims to act as a dust cover for remote telescope users, and a calibration panel if desired. With the DarkLight, fully compliant, ASCOM driver, the cover can be operated using the DLC Windows application or any automation software supporting the ICoverCalibrator driver...

The StarFishDAQ (or SFDQ for short) is a platform for developing MCU based hardware without having to start from scratch. It consists of hardware, firmware and software components. The SFDQ allows those projects that would otherwise use an off-the-shelf DAQ, PLC or MCU SBC to start with a stack of hardware, firmware and software. This allows more control, customization, and future applicability without sinking a ton of effort. The SFDQ can be used simply and quickly, as-is in...

An Arduino based controller for a DC motor focuser solution. Replaces RigelSys/JMI DC Controllers. Windows application and ASCOM driver available. Works with most DC motor solutions (eg RigelSys, JMI, Orion, Skywatcher etc). Feature rich and low cost. Build the controller for under $25. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given...

... a DC motor controlled by an h-bridge and an optical quadrature encoder for feedback. It uses timers, counters, and interrupts to generate PWM to control the speed of the motor, encoder pulse counting, and control loop updates.

Software application, firmware and U.I. for 4-motors 3-axis milling machine, open hardware, software and mechanics. See also project in details for schematics and images on http://www.contesti.eu/opensource/xyz-dc-motor-controller

This script prints quadrature encoder wheels, with an index, it can be edited to create any size wheel. This allows a computer to read the speed and direction of a rotating shaft, such as a servo motor.

A Linux driver and EPICS IOC for the Pro-Dex OMS MAXp. The MAXp is a 8 axis stepper/servo motor controller in PCI card form factor.

Keep It Simple Bus is a PC+MCU based Robotics Framework that utilizes serial port to interface to multiple DC/Servo/Stepper motors through PIC12F683 ising binary protocol. Main goal is to do it as cheap as possible with minimal number of components, fast

The LibMotionControl combines different serial protocols of external motion controllers to one generic interface. It is already implemented for one DC-motor (Maxon ASCII-protocol) and two stepper motor controllers (AML, Phytron). This are user level driv

Brushless DC controller (ESC) Fully functional sensorless ESC. Uses BEMF detecton for rotor position sensing. Software trays to maintain maximum speed on currently available power(pwm duty). It works like ordinary DC motor. More load means, on same power, lower speed and higer current. Motor speed (current) PWM , direction etc. is adjustable via serial port commands. For example - press "k" button to add power, "j" button to reduce power and "t" button to reverse rotor...