Open Source C Scientific/Engineering Software for Windows - Page 4

Open source SCADA running on Windows. Development environment ANSI C/C++98. HMI is based on Qt library. Different technologies (EiC, GigaBASE, FastDB, ORTE) have been integrated. Supported drivers: OPC DA 2.05a, AE 1.10, HDA 1.20, XML DA 1.0, OPC UA 1.03, DNP 3.0, RFC 1006, Modbus, MQTT 3.1.1/Sparkplug B, IEC 60870-5-101/103/104, IEC 62056 DLMS/COSEM, IEC 61850, M-BUS, SNMP.

BioXTAS RAW is a program for analysis of Small-Angle X-ray Scattering (SAXS) data. The software enables: creation of 1D scattering profiles from 2D detector images, standard data operations such as averaging and subtraction, analysis of radius of gyration (Rg) and molecular weight, and advanced analysis using GNOM and DAMMIF as well as electron density reconstructions using DENSS. It also allows easy processing of inline SEC-SAXS data and data deconvolution using the evolving factor analysis (EFA) or the regularized alternating least squares (REGALS) methods. Active source code is now maintained on github: https://github.com/jbhopkins/bioxtasraw To install: Check the instructions available at: http://bioxtas-raw.readthedocs.io/en/latest/install.html and in the Files tab. User guides: RAW guides are available at: http://bioxtas-raw.readthedocs.io/ and in the Files tab. To contact us, see: https://bioxtas-raw.readthedocs.io/en/latest/help.html

Xvigas realiza análisis de las vigas típicas de ejercicios y problemas. Es simple, primero defines el tipo de viga y sus características, luego introduces las cargas y finalmente obtienes los resultados: reacciones, fuerzas internas y deformacione

FLASH, Fast Length Adjustment of SHort reads, is a very accurate fast tool to merge paired-end reads from fragments that are shorter than twice the length of reads. The extended length of reads has a significant positive impact on improvement of genome assemblies.

An nopensource runoff, erosion and flood model openLISEM. There are two branches: - the classic openLISEM that you can find here: https://github.com/vjetten/openlisem/, please contact Victor Jetten (v.g.jetten@utwente.nl) for details. - the multihazard version of LISEM on this page, for details contact Bastian van den Bout (b.vandenbout@utwente.nl). This software is made available under the licence GPL v3.

What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset

XonGrid is a free Excel library of functions to perform 1D, 2D, 3D, 4D and arbitrary dimension (ND) interpolations from scattered data.

Free ladder & sequential (grafcet) languages as used on many PLC for programming automation process. Ladder language allows to realize programs on PLC in an electric way. GTK graphical interface to edit/simulate. Modbus protocol for SCADA connexion and remote Inputs/Outputs modules. Logs events available. Can run on embedded targets for real usages (without GTK interface), as Arietta, RaspberryPi, ... Xenomai support for real-time.

This project, initially developed at University College London, contains programs to perform rigid, affine and non-linear registration of nifti or analyse images. Two versions of the algorithms are included, a CPU- and a GPU- (using CUDA) based implementation.

This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information about "Boards Managers" is available on Arduino.cc official website.

An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen.

ASCEND is a modelling environment and solver for large or small systems of non-linear equations, for use in engineering, thermodynamics, chemistry, physics, mathematics and biology. Solvers for both steady and dynamic (NLA & DAE) problems, are provid

MARIE is a robotic development and integration environment focused on software reusability and exploitation of already available APIs and middlewares used in robotics. Its main purpose is to create a rapid-prototyping approach to robotics developments.

The Red Pitaya is a commercial, affordable FPGA board with fast analog inputs and outputs. This makes it useful for quantum optics experiments, in particular as a digital feedback controller for analog systems. Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya. PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. At the highest abstraction level, arbitrary feedback sequences can be defined to fulfill tasks as complex as approaching and locking a resonance of a high-finesse Fabry-Perot cavity (tested up to finesse=100,000).

Curve fitting | Data analysis | Plotting | Matrix operations | FFT | Extensible framework | Multiple file formats | Programmable | Open source | Free for everyone NumeRe: Framework for Numerical Computation is a numerical framework written for Microsoft Windows(R) and released under the GNU GPL v3 for solving and visualizing mathematical and physical problems numerically. Keep simple things simple: You want to plot a sine function? Just enter 'plot sin(x)'. You want to load some data? Enter 'load "path/to/your/file"' or drag the file into the terminal. You need to fit a function to the data? Enter 'fit data() -with=YOURFUNCTION(x)' Need assistance? Enter 'help topic' into the terminal or simply press [F1]. Find us on Discord: https://discord.gg/s5tSjwU Follow us on Mastodon: https://fosstodon.org/@numeredevs Visit our english page: https://en.numere.org Buy us a coffee: https://ko-fi.com/numere We've moved to GitHub: https://github.com/numere-org

MCX is a GPU-accelerated, general-purpose, physically-accurate and feature-rich 3-D light transport simulator. It is one of the fastest simulators because it can use tens of thousands of GPU threads to simulate photons in parallel.

libnova is a general purpose, double precision, celestial mechanics, astrometry and astrodynamics library.

This ASN.1 compiler turns ASN.1 specifications into C code. The asn1c is shipped together with conformant BER/DER/XER/PER codecs. The X.509, GSM TAP3, MEGACO, RRC and LDAP encoding and decoding examples are part of the source code distribution. NOTE: THE asn1c PROJECT HAS LARGELY MOVED TO GITHUB: http://github.com/vlm/asn1c

Presage (formerly Soothsayer) is an intelligent predictive text entry system. Presage generates predictions by modelling natural language as a combination of redundant information sources. Presage computes probabilities for words which are most likely to be entered next by merging predictions generated by the different predictive algorithms. Presage's modular and extensible architecture allows its language model to be extended and customized to utilize statistical, syntactic, and semantic predictive algorithms. Presage's predictive capabilities are implemented by predictive plugins. Predictive plugins use services provided by the platform to implement multiple prediction techniques.

A fully developed set of DNA sequence assembly (Gap4 and Gap5), editing and analysis tools (Spin) for Unix, Linux, MacOSX and MS Windows.

This is an implementation of post-process phonon analyzer, which calculates crystal phonon properties from input information calculated by external codes, e.g., first-principles calculation code.

A Sequenced Binaural Wave Generator for Linux+Windows. May be used to generate sounds that entrain the brain's waves to oscillate at selected frequencies to aid in relaxation, lucid dreaming, meditation, clear thought, out-of-body experiences + more

This repository is now frozen. The latest version of the RepRap project can be found at https://github.com/reprap.

Arduino support for almost every classic tinyAVR device! Supports ATtiny 1634, 2313/4313, 24/44/84, 441/841, 25/45/85, 261/461/861, 87/167, 48/88, 43 and 828. Supports programming vis ISP, Serial (Optiboot - all parts with >4k flash, and all parts with 4k flash for which an 8k version is available) or VUSB (Micronucleus - where appropriate) There are 272 different versions of micronucleus built (and part of the 2.0.0-dev branch now), and optiboot will dwarf that number! 0 of those have been tested. Obviously, we are leaning very heavily on automation of configuration generation for this release. Half of the tinyNeoPixel speeds have had the assembly routines modified in major ways (there's no more stupid menu for the port), but they are untested. Virtual boot relies on rewriting the vector table, such that the RESET vector points to the bootloader.

RasTop is a molecular graphics program intended for the visualisation of proteins, nucleic acids and small molecules based on the popular Rasmol software. The program is aimed at the rapid visualization and analysis of molecules.