Search Results for "r-map"

This software implements the IEC60870-5-104 protocol (client side) for substation data acquisition and control via tcp/ip network using the QT UI Framework. It can be compiled on Linux and Windows platforms. It's possible to poll and view data from the remote system (RTU) and also send commands. >>> Have a look also at my new SCADA project here: https://github.com/riclolsen/json-scada

v21.06.022 Complete Simulation of IEC 104 Server RTU as per Protocol Standard including File transfer (Both Monitoring and control direction). Add up to 50 server node in the simulator. Every server node will work independently. Tested with all leading commercial test tools. Support all type of Typeid ASDU, APCI, APDU, Command activation and termination commands. support all Cause of transmission (COT), Parameter in control...

...It reads meters, inverters, PLCs and drives over Modbus TCP, Modbus RTU (RS-485/RS-232) or RTU over TCP, and serves the data as an IEC 60870-5-104 or IEC 60870-5-101 controlled station (slave). Map registers to IEC points in a web dashboard: single and double points (also from register bits), measured values, step positions, bitstrings and energy counters, with any byte order, scaling, deadbands and time tags. SCADA commands are written back to Modbus with select-before-operate and a configurable select timeout. Every change applies live, without a restart. ...

A digital marine dashboard that presents, calculates and reads data. Currently reads a small subset av NMEA0138 and some reverse-engineered Volvo Penta CAN-data (such as rpm and MAP etc.) Implemented in C++/QT.