Search Results for "interface library"
Sort By:
Showing 31 open source projects for "interface library"
View related business solutions-
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
Find Hidden Risks in Windows Task SchedulerWindows Task Scheduler might be hiding critical failures. Download the free JAMS diagnostic tool to uncover problems before they impact production—get a color-coded risk report with clear remediation steps in minutes.
-
1
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
...Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen. -
2
TinyGSM
A small Arduino library for GSM modules, that just works
A small Arduino library for GSM modules that just works. This library is easy to integrate with lots of sketches that use Ethernet or WiFi. PubSubClient (MQTT), Blynk, HTTP Client, and File Download examples are provided. Arduino GSM library uses 15868 bytes (49%) of Flash and 1113 bytes (54%) of RAM in a similar scenario. TinyGSM also pulls data gently from the modem (whenever possible), so it can operate on very little RAM. -
3
Sming
Open source framework simplifying the creation of C++ applications
...Built-in powerful wireless modules. Compatible with standard Libraries use popular hardware in a few lines of code. Simple yet powerful hardware API wrappers. HardwareSPI library provides advanced asynchronous SPI device master capability including the use of ESP8266 ‘overlapped’ mode for reduced pin usage and dual/quad I/O support. Modular C++ installable file system interface. -
4
go1pylib
go1pylib is a Python library designed to control the Go1 robot
go1pylib is a Python library designed to control the Go1 robot by Unitree Robotics. It provides an easy-to-use interface for robot movement, state management, collision avoidance, battery monitoring, and MQTT communication. Ideal for research and robotics development. -
Vibes don’t ship, Retool doesVibe coding tools create cool demos, but Retool helps you build software your company can actually use. Generate internal apps that connect directly to your data—deployed in your cloud with enterprise security from day one. Build dashboards, admin panels, and workflows with granular permissions already in place. Stop prototyping and ship on a platform that actually passes security review.
-
5
RoboDude is a programming tool for AVR microcontrollers. The graphical interface is easy to use, because it works with xhex-files (xml files containing ihex and srec sections, mcu information and fuse bit settings). The GUI uses the avrdude library. The binary files are included in the NiboRoboLib Package!
-
6
The Player Project: Player is a networked interface to robots and sensors. Stage and Gazebo are Player-friendly multiple-robot simulators. The software aims for POSIX compliance and runs on most UNIX-like OS's. Some parts also work on Windows.
-
7
Arduino MIDI Library
MIDI for Arduino
...Callbacks to handle input messages more easily. Last received message is saved until a new one arrives. Overridable template-based settings. Create more than one MIDI interface for mergers/splitters applications. Use any serial port, hardware or software. All USB-related code has been moved into a separate repository Arduino-USB-MIDI, USB MIDI Device support with MIDI USB, still using this library to do all the MIDI heavy-lifting. -
8
The Integrating Vision Toolkit (IVT) is a powerful and fast C++ computer vision library with an easy-to-use object-oriented architecture. It offers its own multi-platform GUI toolkit. OpenCV is integrated optionally. Website: http://ivt.sourceforge.net
-
9
PyRobot
An Open Source Robotics Research Platform
PyRobot is a high-level robotics API that simplifies controlling real and simulated robots through a consistent Python interface. Instead of fighting ROS internals, you call clear methods for things like base navigation, arm manipulation, and camera capture, and PyRobot handles the plumbing. It was built to make research repeatable on accessible platforms—most notably low-cost mobile manipulators—while still scaling to richer hardware. The library exposes canonical abstractions (base, arm, gripper, camera, sensors) with calibration and kinematics helpers so beginners can get meaningful results quickly. ... -
Axe Credit Portal - ACP- is axefinance’s future-proof AI-driven solution to digitalize the loan process from KYC to servicing, available as a locally hosted or cloud-based software.Founded in 2004, axefinance is a global market-leading software provider focused on credit risk automation for lenders looking to provide an efficient, competitive, and seamless omnichannel financing journey for all client segments (FI, Retail, Commercial, and Corporate.)
-
10
openCONFIGURATOR
An Open Source POWERLINK network configuration toolkit
openCONFIGURATOR is an open-source configuration framework for easy setup, configuration and maintenance of any POWERLINK (https://goo.gl/U9tjiy) network. It ideally complements openPOWERLINK, the open source POWERLINK protocol stack for master and slave. The project consists of a core library implementing the configuration algorithms and an eclipse plugin base user interface. For XDD tooling and validation support within eclipse please visit: https://goo.gl/NBytgg Please use the update site to install the plugin in your eclipse environment: http://sourceforge.net/projects/eclipse-plugin.openconf.p/files/update-site/ KNOWN ISSUE WITH THE UPDATE SITE DUE TO SOURCEFORGE ENCRYPTION POLICIES: https://goo.gl/kVr2ZZ Install via Eclipse marketplace: http://goo.gl/vweJ9h User Manual: https://goo.gl/viGd5P For Linux distributions with Boost 1.54.0 please use: https://goo.gl/hMRTss For Linux distributions with Boost 1.61.0 please use: https://goo.gl/ZSvW7C -
11
FactoryController
Floor-level factory/shop automatization control software
Floor-level factory/shop automatization control software. MODBUS realtime network & devices controller. Hi-level task-centric parallel execution scenaries. MRP/ERP integration. -
12
-
13
Attitude Estimator
A C++ implementation of a nonlinear 3D IMU fusion algorithm.
...Great emphasis has been placed on having a very efficient, yet totally numerically and algorithmically robust implementation of the filter. The code size has also been kept to a minimum, and has been extremely well-commented. The programmatic interface has also been made as easy as possible. Please refer to the extensive documentation of the library for more information on its capabilities and usage caveats. -
14
MatODE
Matlab interface to the Open Dynamics Engine (ODE)
MatODE is a simple Matlab toolbox for interfacing to the Open Dynamics Engine rigid body physics simulator (ODE, by Russell Smith), created by the Delft Biorobotics Lab (Delft University of Technology, Delft, The Netherlands). The system to be simulated is defined in an XML file, while the joint positions and motor signals can be sensed and actuated from a Matlab script. Examples are provided. Starting at version 0.30, MatODE is only available for Windows and Linux 64-bit. For older... -
15
skillful robot
Adaptive mobile robot controlled by hand movement and sound commands
Control system for skillful robot : Windows / language C# / libraries used in the project (Emgu CV, System.Speech, System.Threading, System.IO) Adaptive intelligent mobile robot and is controlled by the movement of the hand (via the camera) and by voice commands the control program use new technologies and offer new and cheap way to control remote without extra devices like 'kinect' In hardware part I have adopted simplicity on the idea and the goal was access to a flexible structure... -
16
microTone Module
Simple DIY Analog Hardware Interface
microTone Module is analog interface to connect microcontrollers or digital logic systems with PCs. This interface use PC sound card’s audio output terminal to send commands to external hardware systems. -
17
QVision: Computer Vision Library for Qt
Computer vision and image processing library for Qt.
This library contains among other things a set of graphical widgets for video output, performance evaluation and augmented reality. The library also provides classes for several data types usually required by computer vision and image processing applications such as vectors, matrices, quaternions and images. Thanks to a large number of wrapper functions these objects can be used with highly efficient functionality from third party libraries such as OpenCV, GNU Scientific Library,... -
18
A simplified C language API / library for the iRobot Create / Roomba robots that eliminates the byte transfer oriented style of the original command and sensor data calls. Docs, reworked examples from the Create Command Module, build templates for Win/AV
-
19
iSpike is a spiking neural interface between the iCub humanoid robot and a spiking neural simulator such as NeMo.The system aims to provide an interface for the iCub that provides as biologically realistic spike trains from its senses as possible.
-
20
Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.
-
21
A cross-platform library that computes fast and accurate SIFT image features. libsiftfast provides Octave/Matlab scripts, a command line interface, and a python interface (siftfastpy). Optimized with SIMD instructions and OpenMP .
-
22
Mission planning system for IMTP (Institute of Marine Technology Problems, Russian Academy of Sciences) autonomous underwater vehicles.
-
23
MOVED TO GITHUB!! https://github.com/cmwslw/nxt-plus-plus NXT++ is an interface written in C++ that allows the control LEGO MINDSTORMS NXT robots directly through a USB or Bluetooth connection. The interface is intended to be simple and easy to use. The interface can be used in any C++ program.
-
24
This project is to share my work in visual recognition of gestures. It shows how I have implemented person detection, color adaptation and tracking of the user's right-hand, gesture feature extraction, etc. using a single videocamera.
-
25
LMSAPI is a framework library for getting access to the SICK LMS200 sensor from high level programming languages. This will make possible the integration of the LMS200 functionality in advanced automation projects.
