Search Results for "python" - Page 3

...This approach will let us program highly automated and self-deploying or even self-replicating factories. I am more engineer than programmer and just beginner in python. So it looks like community help will be needed :)

LightningROS is a ROS package implementing the Lightning Path Planning Framework. The code here was developed for ROS Feurte. For later ROS versions, see https://github.com/WPI-ARC/lightning_ros This approach uses a path library to store previous experience while allowing generality by also planning from scratch. Please see the paper below for more details: A Robot Path Planning Framework that Learns from Experience Dmitry Berenson, Pieter Abbeel, and Ken Goldberg IEEE...

This project is a part of a mini project required by the Mechatronics-2 course for the 4th year Mechatronics class in faculty of engineering Ainshams university. The mini project involves the control of an articulated robotic arm which resembles a human arm. The control is done via tele-manipulation which is done by the tracking of 4 IR LEDs fixed at the joints of the controller arm. This code is the part of the project responsible for the interfacing with the wiimote, stereo-triangulation...

A virtual scanner that converts 3D models (in Wavefront .obj format) into pointcloud files (in PCL .pcd format). Useful for simulating robotic input. NOTE: This project has been merged into the project at https://github.com/canderegg/cfg_obj

A software toolkit that implements the CoSy Architecture Schema for developing integrated intelligent robotic systems. The toolkit focuses on supporting on a space of information-processing architectures based on shared working memories.

The rp6simul project brings simulation software for the RP6 robot that is manufactured by AREXX engineering. Besides support for all peripherals on the robot base, the simulator also fully supports the m32 extension module, and both can be simulated either independently or simultaneously. Furthermore, a simple 2d environment can easily be created to test lighting, collision, motor speeds and so on. The simulator does not run native AVR files, but instead a thin wrapper is provided so that...

This is the RoboCup Mixed Reality Project: a standard research and educational platform integrating cutting edge and low cost watch technology into a miniature multi-robot system which mixes reality and simulation.

NOTE: We have moved to bitbucket, the code here is not maintained anymore https://bitbucket.org/makokal/openprm/overview

pydaqtools provides a common interface to data-acquisition hardware for Python. Control analog/digital output or acquire analog/digital input for immediate analysis with Python for scientific, educational or engineering applications.

Open source, cross platform drivers and function library for the NovInt Falcon Haptic Controller. These drivers are not produced by Novint Technologies, Inc. and do not come with any warranty as to their correctness or usage.

The Dragon Fire compiler takes a new, 21st century, look at the Dragon (i.e. Dragon Book). No longer impenetrable to the programmer, this compiler is open and available to them. You control the Dragon, and get Dragon insight into your programs.

NOTE: We have moved the project to https://bitbucket.org/makokal/openprm/overview, all the code that is still in sf is not maintained anymore. please use the new code at the location given

pyComPic is a GUI (Graphical User Interface) for picprog, sdcc and gpasm written in Python. It uses pyGTK and GTK2 for the interface. It's a good choice if you want to avoid the command line. It works with all PIC programmers supported by picprog

The Massive G Engine is a simple yet feature-rich extensible 3D simulation engine for Robotics Research and gaming.

Hardware, firmware, and software components for a wireless inertial measurement and control system to facilitate autonomous robotics development.

This project contains tools, that were created during the work with the Katana robotic manipulator at the workgroup EOS of the University of Magdeburg.

The WU personal robotics package is a collection of robotics middleware developed by WashU faculty, students, and staff.

The CMU personal robotics package offers many robotics algorithms/controllers/drivers that enable robots to perform basic tasks like manipulation and vision. The main infrastructure used is OpenRAVE and Robot Operating System (ROS).

This is the public icram.de code repository filled with code/code-snippets and other useful stuff.

A cross-platform library that computes fast and accurate SIFT image features. libsiftfast provides Octave/Matlab scripts, a command line interface, and a python interface (siftfastpy). Optimized with SIMD instructions and OpenMP .

A python-tkinter kit to experiment with the generation and solving of mazes.

pySpykeeWeb is a simple web server written in Python for controlling a Spykee robot. Currently the program supports robot movement, dock, undock, battery level reporting commands, and video streaming.

PROJECT HAS MOVED! ROS is now hosted at https://code.ros.org/gf/project/ros/

A simple GUI frontend for the Microchip pk2cmd program written in python. At the minute it only supports writing. I plan to add reading and maintainance (renaming pickit2 devices, updating firmware) features soon.

pyWombat is a Python encapsulation layer for the Serial Wombat PIC microprocessor (www.serialwombat.com). The goal is to develop a robotics platform with intelligence on the host in Python and 'arms, legs and eyes' on the Wombat. See Wiki for details.