Search Results for "gui software"

...A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset

C library for robot creators using certain AVR microcontrollers with support for 3rd party hardware boards for various sensors and motor controllers. Comprehensive PDF manual included in the download. Version 2 code stream - requires that projects are created using Project Designer from my web site. If your board isn't listed in Project Designer then look at Board Designer on my web-site to create your own custom board - or if its a commercial board then let me know and, with permission,...

A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application.

gnome-avrdude is a GNOME graphical user interface (GUI) for the command-line Atmel AVR microcontroller programming software "avrdude" (http://savannah.nongnu.org/projects/avrdude/).