Search Results for "spi"

...The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. ...

Basic Octave implementation of the matlab raspi extension, allowing communication to a Raspberry Pi board to control its hardware.

A dynamic C library to control Raspberry Pi GPIO channels Supports all production models / all SOC This library has code to:- Read Raspberry Pi Information Perform basic GPIO functions • Set gpio as input or output • Read/Write gpio • Set pullup/down of gpio • Read the current gpio mode • Read gpio pull/up down (Pi4/BCM2711 only) Software PWM on all pins Hardware PWM support Read/Set PAD drive, hysteresis & slew settings I²C SPI

...If you are after true real-time performance and predictability, buy yourself an Arduino! (see http://www.arduino.cc ) Note that the current release does not support SPI, I2C, 1-wire or serial functionality on the RPi yet. This is planned for the near future - watch this space!

openMAS is an open source hardware platform based on DIN41612. Different boards can be used as controllers (Arduino, RaspberryPi, Nucleo, NI-Hardware). The modular construction converts your µ-controller board into an extensible measurement and automation system. For more information: openmas.de The english page is not ready, please use the german version. Have a lot of fun, openMAS-Team

...The framework provides facilities for real-time rendering of graphics (using DirectX, OpenGL or Software Renderer), text output, mathematics (including vectors and matrices) and networking communication, among other features. It also supports singleboard devices such as Raspberry PI, Intel Galileo, BeagleBone Black and others with features like GPIO, SPI, I2C and so on, along with external displays, sensors and other peripheral devices.