Search Results for "pi pico"

... is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen.

Precompiled Windows binaries from Raspberry Pi Pico SDK elf2uf2 - https://github.com/raspberrypi/pico-sdk/tree/master/tools/elf2uf2 pioasm - https://github.com/raspberrypi/pico-sdk/tree/master/tools/pioasm picotool - https://github.com/raspberrypi/picotool

Midbar is more than just a password vault! It's made to significantly increase the cost of unauthorized access to its your personal data. Some tutorials: ESP32 V4.0: https://www.instructables.com/Midbar-V40/ Raspberry Pi Pico V2.0: https://www.instructables.com/Midbar-Raspberry-Pi-Pico-Version-V20/ ESP32 V5.0: https://www.instructables.com/Midbar-V50/ STM32F401CCU6 + Arduino Uno Version V1.0: https://www.instructables.com/Midbar-STM32F401CCU6-Arduino-Uno-Version/ RTL8720DN + Arduino...

MTF provides a simple framework for hardware projects written in microPython for the Raspberry Pi Pico. Designed where polling is needed, projects can be broken down into discrete components (tasks) which can run together. MTF provides scheduling, timeouts and a simplified signalling system for tasks to communicate with each other. Version 2.1 uses a modified run-loop which improves timing accuracy for short periods.

The KhadashPay project is my attempt to make a payment system from scratch. As for the customers of the store where the KhadashPay is deployed, Khadash pay doesn't keep any logs whatsoever and doesn't require a bit of your personal information to create an account. You can find the tutorials here: V2.0 (ESP32 Version): https://www.instructables.com/KhadashPay-V20/ V2.0 (Raspberry Pi Pico Version): https://www.instructables.com/KhadashPay-V20-Raspberry-Pi-Pico-Version/ V3.0...

Recently, I discovered the power of Bing Image Creator, a generative AI based on the DALL-E 3 text-to-image model. At first, I was just playing with it and testing its capabilities. However, after exploring it for roughly an hour, I started thinking about its practical applications and where I could use it. Eventually, I realized that I could use it to generate unique images and then display them on the 2.4 Inch TFT LCD with ILI9341 connected to the Raspberry Pi Pico. If you wish to learn...

A small C/C++ projects that renders a cellular automaton (Conway's game of life) on an 128x64 Pixel Oled display (SSD1306 controller). The project can be used as tutorial or template for the Pico C/C++ SDK and for benchmarking that controller.

Based on Raspberry Pi Pico board, this metal detector is included in pulse induction metal detectors category, with well known advantages and disadvantages. RPi Pico generate 3,3v amplitude pulses at one of GPIO pins. This pulses are amplified and applied to a MOSFET device that had the searching coil in series with drain. The pulse will produce a magnetic field generated by the searching coil, and becose of eddy currents, the target will produce a very low corresponding voltage...