Search Results for "python user interface"

...Valtr et al., Scanning Probe Microscopy controller with advanced sampling support, HardwareX, Volume 15, e00451 https://www.hardware-x.com/article/S2468-0672(23)00058-5/fulltext It is based on a low cost FPGA board Red Pitaya and additional high bit depth AD and DA converters. When put together with the AFM scanning hardware (sensor, scanner and their amplifiers) and user interface software it can serve as a standalone SPM system. Otherwise, it can serve as a sub-module for a custom built SPM system, e.g. providing the feedback loop mechanism only. Finally, it can be used as a board for developing advanced sampling techniques, which was the primary goal.

...This makes it useful for quantum optics experiments, in particular as a digital feedback controller for analog systems. Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya. PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. ...

The goal of this project is to develop an easily modifiable combination of VHDL firmware and LabView drivers for use with laboratory automation control and data acquisition using Terasic's DE2 board and the ISP1362 USB interface chip.