Search Results for "data acquisition"
Sort By:
Showing 22 open source projects for "data acquisition"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
1
QSE is an application intended to help in the initial stages of data reduction of EXAFS data taken with multi-element detectors using the 'Spec' data acquisition system.
-
2
QXRD is software for the acquisition and analysis of X-ray data taken with 2 dimensional detectors. The software can drive a Perkin Elmer XRD series flat panel detector and can be remote-controlled via a socket interface, or directly from SPEC
-
3
Tempico software
Software to control and analyze Tausand Tempico TP1004 timing data
Tempico Software is designed to control the Tausand Tempico TP1004 device, a time-to-digital converter that captures temporal differences from a common start signal across multiple channels. The software generates histograms from captured data, supports lifetime measurements via single-photon correlation (SPC), and displays real-time graphs with adjustable fitting options. It also includes a 'Counts Estimated' panel to estimate count rates per channel over time. Users can view, configure,... -
4
Gwyscope
Open hardware SPM controller with advanced sampling support.
Gwyscope is a low cost, open hardware, Digital Signal Processor (DSP) suitable for Scanning Probe Microscopy measurements, focusing on demonstrating the concept of adaptive scanning, general XYZ data acquisition and statistical data processing on the controller level. More details can be found in: M. Valtr et al., Scanning Probe Microscopy controller with advanced sampling support, HardwareX, Volume 15, e00451 https://www.hardware-x.com/article/S2468-0672(23)00058-5/fulltext It is based on a low cost FPGA board Red Pitaya and additional high bit depth AD and DA converters. ... -
Gemini 3 and 200+ AI Models on One PlatformBuild generative AI apps with Vertex AI. Switch between models without switching platforms.
-
5
Python Laboratory Operations Toolkit
many useful snippets for using python in a laboratory
A toolkit of Python software useful in a laboratory data acquisition and analysis environment. Includes support for such protocols as VXI-11 (and its extension, LXI), Vernier LabPro (now very old), and National Instruments DSTP (now very old). Also includes data analysis and modelling tidbits. Python3 updates are on the way in the very near future for the biggest packages. the vxi11 package is fully up-to-date, although see the blog post about python 3.13 -
6
GXSM
Scanning Probe Microscopy Controller and Data Visualization Software
GXSM -- Gnome X Scanning Microscopy: A multi-channel image and vector-probe data acquisition and visualization system designed for SPM techniques (STM,AFM..), but also SPA-LEED/LEED/LEEM data analysis. A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. -
7
The NSCL Data Acquisition system is a general purpose nuclear physics data acquisition system in use at several university labs and, of course, the National Superconducting Cyclotron Laboratory at Michigan State University. The development of the NSCLDAQ is currently funded by DOE grant DE-SC0000661 Note that as of July, 2023 all development and release packages will be hosted at https://github.com/FRIBDAQ/NSCLDAQ
-
8
Specfe is a graphical front end program intended to aid the use of the 'spec' data acquisition software. It can display interactive graphs of scanned data and present a user-friendly graphical interface to several of the more common spec commands.
-
9
htcontrol
controls high-temperature single-crystal XRD experiments using IPDSII
htcontrol is a software to control high-temperature single crystal XRD experiments on a STOE IPDS II or 2T diffractometer platform. A Manson SDP2210 power unit is needed as well as the ICP DAS I7019 data acquisition interface (amount of investment approx. 600 EUR). htcontrol is written in Perl and runs on a cygwin platform to be installed on the WinXP/10 host. Data collections are performed with Stoe's WinXpose (>=1.7.3) via the non-interactive XML interface. For details see: J. Appl. Crystallogr. 42(1), 140-142, DOI:10.1107/S0021889808035607 -
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
10
Jam--Nuclear Physics Data Acquisition
Java-based nuclear physics data acquisition.
This project now lives at https://github.com/dwvisser/jam-daq-code/ Jam is an easy-to-use self-contained data acquisition and analysis system for VME-based (or CAMAC-based) nuclear physics experiments. Jam has an easy, standard GUI for taking and sorting multi-parameter event-based data into 1-d and 2-d histograms. -
11
RadiationHelper
Alpha, Beta, Gamma measurements and Nuclide exposure
RadiationHelper is a data analysis tool for : 1. gross alpha and beta radiation measurement and detector calibration using experimental data (counts acquired by alpha-beta devices). 2. gamma spectroscopy measurements and detector calibration using experimental data (spectra acquired by acquisition software such as Assayer, Gamma Vision, Maestro) 3. gross alpha,beta, gamma detector efficiencies and gamma peak efficiency can be theoretical computed using Monte-Carlo simulation technique for radiation transport (based on EGSnrc toolkit) 4.dose assessment in human body exposed to radiations from nuclides in several common scenarios such as air exposure, water submersion, ground surface, internal ingestion or inhalation. 5. quick dosimetry and shielding computations. ... -
12
ATOMKI Common Data Acquisition
Nuclear physics data acquisition system
Nuclear physics data acquisition system. The suit of applications can be used to collect data from physics experiments using CAMAC/CAEN/VME devices. The system is quite specialized, but the code can still be useful for others doing something similar... -
13
Tireless Worker
Experimet automation software system
Tireless Worker will help automating experimental research. One can easily write a REXX script to automate data acquisition and equipment control. NI VISA binding is implemented, as well as RS-232 communication. -
14
MNDACS (Mesh Networked Data Acquisition and Control System) is a Java, network based control system. The project approach is to build a mesh system to tolerate control unit breakdowns with load balancing between units.
-
15
The pySpec project is a set of data analysis routines written in python for analysis of x-ray diffraction data produced by the SPEC X-Ray Diffraction and Data Acquisition software. This repo has moved to : https://github.com/stuwilkins/pyspec
-
16
The Software for Controlling Testing Equipment - has been designed to automate data acquisition and equipment control. Written in Perl, uses the SCPI language to communicate with instruments via RS-232 (serial) or USB ports.
-
17
XDAQ is a software platform designed specifically for the development of distributed data acquisition systems. The development is carried out at CERN, the European Organization for Nuclear Research. Please visit http://xdaq.web.cern.ch
-
18
This toolkit allows complete control of a microscopy setup from Labview, Matlab, Scilab, Python, .Net, VB, IgorPro, Mathematica and more. Included is a standalone program for image acquisition and scripting control of a scientific microscope.
-
19
-
20
The goal of this project is to develop an easily modifiable combination of VHDL firmware and LabView drivers for use with laboratory automation control and data acquisition using Terasic's DE2 board and the ISP1362 USB interface chip.
-
21
Mind this project is no longer maintained. You might be interested in having a look at http://pythonhosted.org/plasduino/ instead. Framework for data acquisition through the parallel port, suitable for performing simple didactic physics experiment.
-
22
- Previous
- You're on page 1
- Next
