Search Results for "sd card"
Sort By:
Showing 15 open source projects for "sd card"
View related business solutions-
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
Veeam Data Platform v13.1 - Get Your Free TrialTry Veeam Data Platform today. Experience the unified platform that's secure by design, portable by default, and proven to recover clean, fast, and anywhere.
-
1
LibreELEC
Just enough OS for KODI
LibreELEC is a minimalist 'Just enough OS' Linux distribution for running Kodi. Our documentation can help you install and configure LibreELEC to run Kodi or develop and build installation images using our build system. -
2
ArkOS
Another rockchip Operating System
...This OS came about from an initial fork of The Retro Arena to support a roms folder on a NTFS partition so that the management of roms could be done by simply putting you SD card into an appropriate card reader on a Windows 10 computer. Through various upgrades and tweaks overtime, it has diverged significantly from TheRA and it's time to rebrand this distro. With suggestions provided by community members, ArkOS was chosen. -
3
openWrt-snort
Image of OpenWrt OS, with snort community featured in.
...eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD commend of UNIX. **USERNAME** - root **PASSWORD** - bing.google12 -
4
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here.... -
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
5
Glados-18.04-x86_64
Linux OS Science project running in RAM with persistence of datas
Glados is a science project aiming to run a full Linux operating system in RAM able to save persistent datas to disk. Glados provides latest LXDE desktop environment using Ubuntu LTS 64bits repositories. Depending on user choice at boot sequence, the operating system can be set to full load in RAM, or not. When running fully loaded in RAM, Glados expands to a genetic lifeform able to operate devices. User can install any software package from Ubuntu LTS repositories using apt... -
6
berryboot
Berryboot -- Boot menu / OS installer for ARM devices
Berryboot is a simple operating system installer and boot selection screen for ARM devices such as the Raspberry Pi and Cubieboard. It allows you to put multiple Linux distribution on a single SD card. -
7
zARCHIVES.omxplayercamview.service-rpi-l
raspbian-lite simple systemd service implementation using omxplayer
raspbian-lite based image with omxplayercamview.service Install/Setup/Configure with: 1) Download latest img, and write to sd card. 2) After install and reboot, login using : pi/raspberry a) Go ahead and change your password for the pi account. b) Enable/start ssh server sudo systemctl enable ssh sudo systemctl start ssh Note:If you dont enable ssh server and you setup your camera as kiosk, you may find it difficult to resetup another camera view unless you disconnect from network/ or reboot, this is due to the nature of a persistent service, with no exit hooks, yet. 3) $sudo edit /etc/systemd/system/omxplayercamview.service Change line #18 to your camera's ip/port Optional: *adjust 15 second timeout *adjust 3 second up as needed @ Restart=on-failure value near end of file 4) Enable service $sudo systemctl enable omxplayercamview.service 5) start service $sudo systemctl start omxplayercamview.service 6) $sudo reboot -
8
Maintenance Update: Fixed KDE mouse freeze after screen idleness. LXDM Login Manager Image now fits on a 8gb SD card Desktops: KDE LXQT LXDE MATE XFCE Browsers: Chromium Firefox
-
9
MINIBIAN image for Raspberry Pi
MINIBIAN is a MINImal RaspBIAN-based Linux image for Raspberry Pi
...Unlike other similar projects, MINIBIAN has not been obtained purging unneeded packages from original image, neither recompiling the source code: it’s just a customized Raspbian installation obtained from the same repository used for official RPi image. So kernel and binary files are exactely the same you will find on standard image, with the difference that MINIBIAN fit on 1GB SD Card, is fastest, and updated more often. -
Cut Data Warehouse Costs by 54%BigQuery delivers 54% lower TCO with exabyte scale and flexible pricing. Free migration tools handle the SQL translation automatically.
-
10
PI to DC
Raspberry Pi based PC - DC server
Raspberry Pi SD Card image that enables you to put your Dreamcast online without any major hassle. -
11
galileo-debian
Debian for Intel Galileo Board
This project provides packages and an SD card image for Debian for the Intel Gellileo boards (both Gen 1 and Gen2). Aside from the board specific kernel and some configuration that is unique to this board, the rest of the image is normal Debian Wheezy for i386. -
12
Pibox
Images of pre-configured Raspberry Pi operating systems.
Pre-configured images of my Raspberry Pi operating systems, used for backup essentially, if they help anyone else, good ! These files just need flashing to the appropiately sized SD card and then booting in your Pi, no install needed. You will need to use the dd command if the SD card is the same size as the image, if larger you can flash the SD card with "Startup Disk Creator" or similar. You should be able to login with root/root and in most Raspbian releases pi/raspberry for username/password and then change the passwords for security as well as creating any new users if you plan on using them. ... -
13
pastoo
raspberry gentoo image for free pascal developers
8GB SD card image for raspberry - linux gentoo (2.8 GB used, OpenRc) - current localization: italian (you can find info to change settings in wiki link) - no X server - software: ssh, subversion and git - official fpc 2.6.4 - fpc trunk 2.7.1 (src downloaded subversion and compiled with fpc 2.6.4) - root password: q1w2e3r4t5 - psuser password: psuser -
14
mini-wheezy
A tiny wheezy Distribution for Raspberry PI
...This is my small attempt to make a mini-wheezy distribution which is just 8 Mb, for Raspberry PI. Although it is mini, but you can use debian-wheezy repository, for additional application. Download file, and extract the image. Copy the image to a SD card, and Insert the SD card in Raspberry PI and there you go. The password is pi:raspberry and root:root. -
15
Ramdisk Rescue allows Embedded Linux to be installed to a flash card (SD, MMC or CF) using a handheld, without requiring a separate computer to format the card.
- Previous
- You're on page 1
- Next