Search Results for "device"

...Rather than replicating traditional monolithic kernels exactly, it emphasizes modularity, safety, and simplicity by incorporating well-structured subsystems for memory management, scheduling, and device abstraction that are easy for contributors to understand and extend. The kernel uses Rust as its primary implementation language, which gives it strong memory safety guarantees and helps reduce common classes of bugs like data races and buffer overflows without sacrificing performance. It aims to serve as both a learning tool for systems programming students and a testbed for advanced research in kernel architecture, enabling experimentation with new ideas in process isolation, resource management, and driver models.

The Zephyr Project is a new generation real-time operating system (RTOS) that supports multiple hardware architectures. It is based on a small-footprint kernel specially designed for use on resource-constrained and embedded systems. The Zephyr OS can be used for a wide range of applications: from simple embedded environmental sensors and LED wearables to sophisticated embedded controllers, smart watches, and IoT wireless applications.

The operating system and all related software that runs on FarmBot's Raspberry Pi. The FarmBot OS release page has moved to my.farm.bot/os. Old versions of FarmBot OS can still be found. Get configured over WiFi, mitigating the need to plug in a mouse, keyboard, or screen. Communicate with the web application over WiFi or ethernet so that it can synchronize (download) sequences, regimens, farm designs, events, and more; upload logs and sensor data; and accept real-time commands. Communicate...

A kernel for your device

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here. http://feilipu.me/?s=Goldilocks+Analogue The Goldilocks 1284p story is here. http://feilipu.me/2013/03/08/goldilocks-1284p-arduino-uno-clone/ If this repository is too complicated to get started, a minimum AVR freeRTOS configured using the Watchdog Timer and Heap 3 is also also available. https://github.com/feilipu/miniAVRfreeRTOS For the Arduino platform there is a freeRTOS Library available in the Arduino IDE Library manager. https://github.com/feilipu/Arduino_FreeRTOS_Library

HelenOS is a portable microkernel-based multiserver operating system written from scratch. It decomposes key operating system functionality such as file systems, networking, device drivers and graphical user interface into a collection of fine-grained user space components that interact with each other via message passing. A failure or crash of one component does not directly harm others. HelenOS is therefore flexible, modular, extensible, fault tolerant and easy to understand. HelenOS does not aim to be a clone of any existing operating system and trades compatibility with legacy APIs for cleaner design. ...

AliOS Things was released at the 2017 Hangzhou Yunqi Conference. It is a highly scalable IoT operating system under the AliOS family for IoT. It was announced as open-source on GitHub on October 20, 2017. The latest version is AliOS Things 3.3. AliOS Things supports multiple CPU architectures, including ARM, C-Sky, MIPS, RISCV, etc. AliOS Things adapts layered architecture and component architecture. Alibaba's value-added and commonly used IoT components, including LinkSDK, OTA (safety...

BootDebug is kind of an odd ball tool. It boots up like an OS (using Grub) but is not really an OS at all. What it provides is a tool to look at the system in a very pure state, allowing you to see exactly what is going on at they very start of the system powering up.

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back...

The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.

The objective of the TPM Emulator project is the implementation of a software-based TPM and MTM emulator as well as of an appropriate TCG Device Driver Library (TDDL).

...Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device Programming Check the Wiki Page for more details.

This project consist in a portable image of Ubuntu that could run in Windows as a native win32 application. You could execute Linux applications and integrate it in your Windows desktop. This system can be bringing in any removable device such as pendriv

FunkOS is an RTOS for 8-32 bit MCUs including AVR, MSP430, and Cortex M3. Both C and C++ kernels avaiable. Key features include preemption, periodic events, device drivers, and mutex/semaphores. Includes a variety of graphics and filesystem middleware. Please also check out FunkOS's big brother, Mark3OS. Mark3OS is slightly larger, but is more scalable, much more feature-rich, and supports a wider variety of devices.

my work to re-arrange linux for XBOX, PSP, NDS etc

Boiler-template (source) file generator. Automates (source) file generation from template files: speeds up developement of redundant or re-usable software and more. An example template for Linux Kernel Device Drivers generation, is included.

The goal of the project is to create an OS for archos device (Jbmm, Av and Gmini series). We are now working on our own kernel on: www.archopen.org. This kernel can be used as a lib to create seperate apps. It also has a gui that is able to launch elf li

C++ Runtime Library for Windows Kernel Device Drivers. This provides basic support for the use of C++ in kernel mode drivers, when using the Microsoft WDK.

Jazmyn is a 32-bit, Protected mode, Multitasking OS which runs on i386 CPU`s. Its completely written in C++ & a bit of 8086 assembly. Jazmyn has 4 major parts of an OS : Process management,Memory management, Device management & File system driver.

There are popular tape device ArVid which based on ordinary (PAL/SECAM) VHS & ISA board with PLM which often used in Russia and xUSSR. ArVid board are controled by VHS behind integrated multisystem IRC node. I've coded raw driver for this device. Driver

GenesisAE defines and implements an application environment for portable, network-transparent and secure applications. GenesisAE is based on a QNX-like (S/R/R) microkernel and on basic servers (providing device I/O, a database, ...)

Hadie - Hardware Abstracting Device Independent Environment. Or just another micro kernel for embedded devices. Supported architecture are i8051 (80515c), i166 (XC161CJ), Tricore (TC1775B), m68k (m68332) and i386.

A simple operating system made for educational purposes. It will be a 32 bit multitasking open source operating system. Latest release covers interrupt handling, device drivers and shell service.

Committed to the development of fundamental ACPI (Advanced Configuration and Power Interface) components for Linux. This includes a generic ACPI table parser, AML interpreter, bus and device drivers, policy, user interface, and support tools.