Search Results for "linux scan driver"

The Zephyr Project is a new generation real-time operating system (RTOS) that supports multiple hardware architectures. It is based on a small-footprint kernel specially designed for use on resource-constrained and embedded systems. The Zephyr OS can be used for a wide range of applications: from simple embedded environmental sensors and LED wearables to sophisticated embedded controllers, smart watches, and IoT wireless applications.

Moss Kernel is an open-source operating system kernel project designed to explore modern OS design and provide a foundation for experimental system research and development. Rather than replicating traditional monolithic kernels exactly, it emphasizes modularity, safety, and simplicity by incorporating well-structured subsystems for memory management, scheduling, and device abstraction that are easy for contributors to understand and extend. The kernel uses Rust as its primary implementation...

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

xone is a Linux kernel driver for Xbox One and Xbox Series X|S accessories. It serves as a modern replacement for Xpad, aiming to be compatible with Microsoft's Game Input Protocol (GIP). Installing Xone will disable the Xpad kernel driver. If you are still using Xbox or Xbox 360 peripherals, you will have to install xpad-noone as a replacement for Xpad.

...The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

The objective of the TPM Emulator project is the implementation of a software-based TPM and MTM emulator as well as of an appropriate TCG Device Driver Library (TDDL).

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device...

One day there will be a Windows 9, coming after Windows 8 and current Windows 7. Why not starting working now on a Windows 9 similar open source OS ten years before it appears instead of still working on it 10 years after it will become obsolete?

FreeOS/1 is a Free, Open Source, FreeDOS based Free and Open Source Alternative OS, with open source Microsoft Windows compatibility using HXDOSExtender KernelEx,and ReactOS source code. FreeOS/1 will include new technologies and will be easy to use

FunkOS is an RTOS for 8-32 bit MCUs including AVR, MSP430, and Cortex M3. Both C and C++ kernels avaiable. Key features include preemption, periodic events, device drivers, and mutex/semaphores. Includes a variety of graphics and filesystem middleware. Please also check out FunkOS's big brother, Mark3OS. Mark3OS is slightly larger, but is more scalable, much more feature-rich, and supports a wider variety of devices.

K-OS is an open-source realtime-operating-system based on the OSEK/VDX standard aimed at compiler and microcontroller independence. Currently we support Motorola (Freescale) HC12/HCS12/HCS12X targets.

Jazmyn is a 32-bit, Protected mode, Multitasking OS which runs on i386 CPU`s. Its completely written in C++ & a bit of 8086 assembly. Jazmyn has 4 major parts of an OS : Process management,Memory management, Device management & File system driver.

This interface will allow you to write code to retrieve and send promiscuous network packets from your Java program. It could provide a starting point for a java nmap or such...