Search Results for "driver device tpkd"

...Rather than replicating traditional monolithic kernels exactly, it emphasizes modularity, safety, and simplicity by incorporating well-structured subsystems for memory management, scheduling, and device abstraction that are easy for contributors to understand and extend. The kernel uses Rust as its primary implementation language, which gives it strong memory safety guarantees and helps reduce common classes of bugs like data races and buffer overflows without sacrificing performance. It aims to serve as both a learning tool for systems programming students and a testbed for advanced research in kernel architecture, enabling experimentation with new ideas in process isolation, resource management, and driver models.

The Zephyr Project is a new generation real-time operating system (RTOS) that supports multiple hardware architectures. It is based on a small-footprint kernel specially designed for use on resource-constrained and embedded systems. The Zephyr OS can be used for a wide range of applications: from simple embedded environmental sensors and LED wearables to sophisticated embedded controllers, smart watches, and IoT wireless applications.

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

FiwixOS 3 is a Fiwix distribution, an operating system made from a software collection that is based upon the Fiwix kernel. It basically comprises a Fiwix kernel, GNU tools, libraries and additional software. All the included software is free and open-source software made available both as compiled binaries and in source code form, which allows modifications to the original software. FiwixOS 3 uses the Newlib v3.1.0 as its C standard library, and the Ext2 as its primary file...

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back...

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

A Linux Alsa MIDI device driver for the Mixman dm2(TM) virtual turntable device.

...It reduces the development time and executes code in an elegant fashion. This IDE supports Linux kernel configuration, compilation & emulation, system call development and device driver development. LinK+ IDE includes various templates in the category of character, block and network device driver subsystems for device driver development. It includes various bus infrastructure templates and also provides Linux device driver code completion, code assistance & code navigation for developers. Download - LinK+ IDE for 32 & 64-bit architecture : https://sourceforge.net/projects/linkplustest/files/installers/ LinK+ Update Site (compatible with Eclipse IDE v3.6.x ): http://sourceforge.net/projects/linkplustest/files/repository/ User Manual: http://sourceforge.net/projects/linkplustest/files/documentation/LinK%2B_UserManual_Rev4.pdf

The objective of the TPM Emulator project is the implementation of a software-based TPM and MTM emulator as well as of an appropriate TCG Device Driver Library (TDDL).

Driver module using rtc-driver allowing multiple users to use the real-time-clock. Each task opening the timer device gets its own image of the RTC. Except setting the RTC, all features can be used on a per task basis without frequency restriction.

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device Programming Check the Wiki Page for more details.

U-tube monitors the memory usage of each VM to detect its memory pressure, and periodically adjusts its memory allocation via memory hotplug. It is implemented as a loadable device driver to coordinate guest OS’ MMU with underlying hypervisor. In contrast to the popular ballooning mechanism, memory hotplug can dynamically expand a guest OS’s physical memory space beyond its maximum configured at booting time.

FunkOS is an RTOS for 8-32 bit MCUs including AVR, MSP430, and Cortex M3. Both C and C++ kernels avaiable. Key features include preemption, periodic events, device drivers, and mutex/semaphores. Includes a variety of graphics and filesystem middleware. Please also check out FunkOS's big brother, Mark3OS. Mark3OS is slightly larger, but is more scalable, much more feature-rich, and supports a wider variety of devices.

This project is an attempt to provide the Linux community with kernel drivers for two hugely popular DVD playback cards namely DXR3 from Creative Labs and Hollywood Plus from Sigma Designs.

rtusd is a foundation set of real time enabled User Space Devices/Drivers designed to link to HRT high resolution Timer controlled POSIX threads and link re-factored Linux hdw drivers for 2.6.18+. rtusd propogates Linux RT to user space generically.

Linux InfiniBand Device Driver for IBM Host Channel Adapter for eServer and eHEA ethernet device driver for IBM eServer System p

PXA is Intel Personal Communication Architecture. PXA Linux is a collection of Linux kernel code, device driver, file system and cross compilers for PXA processors. We build the project to share our idea and work with the community.

Virtual Device Driver Tinkering This is a project to create simple virtual devices (think lo interface) for instructional purposes, and to generate new ideas. Initial code will be based on O'Reilly's Linux Device Drivers example source code.

Linux device driver and userspace tools to support configuration and internet access with the ISDN-PBX brands "Deutsche Telekom Eumex x04", "DeTeWe OpenCom 20-40", "DeTeWe TA33 USB" and "EuraCom 140 USB"

The aim of this project is to develop a modular operating system for the i386 architecture, where each device driver, file system, etc, will be a module that can be loaded and unloaded at run-time from the system.

Device Driver for the ACS USB servo controller (USBB-01 interface card). HID class USB device to contoll eight RC type servos, eight optically isolated current inputs and 8 current sink outputs.

mDriver is a utility to migrate binary device driver from Windows to Linux. It takes out the binary instruction and data from Windows driver (*.sys files), and then combine them with some supporting code to build a corresponding Linux driver module.

Jazmyn is a 32-bit, Protected mode, Multitasking OS which runs on i386 CPU`s. Its completely written in C++ & a bit of 8086 assembly. Jazmyn has 4 major parts of an OS : Process management,Memory management, Device management & File system driver.

Zydas 1201 based wireless adapters Linux driver. As Sweex is not longer supporting Linux for this device, but they did in the past using MPL and GPL licenses, we have posted the original and evolved driver.

The cowloop-driver is a copy-on-write loop driver (block device) to be used on top of any other block driver. The cowloop-driver shields the lower driver from any write accesses. Instead, it diverts all write-accesses to an arbitrary regular file.