Search Results for "32-bit"

ModbusBB is a Windows Modbus master/client, slave/server simulator and command-line tool for SCADA and automation engineers testing PLCs, meters, inverters, drives and gateways. Connect to multiple devices over TCP, RTU, ASCII, RTU-over-TCP or UDP. Read/write coils and registers, inspect raw TX/RX frames, decode 16/32/64-bit values and strings with selectable byte order, scaling and units, and use FC08/17/22/23/43 device tools. Simulate devices with value generators, exceptions and delays. Scan devices/registers, plot trends, log CSV data, configure watchdog alerts and automate tests with CLI JSON/CSV output. Free 30-day trial: all features, 15-minute sessions. $10 USD lifetime license: unlimited session time, one user on up to 3 computers, free updates. ...

...Disconnect removes the routes and DNS settings it added; close the app and the PC is back on its normal network. Free and open source (MIT). Needs Windows 10 1809+ / 11 (64-bit) and an Android phone with USB or Wi-Fi debugging.

Max IEC Gateway connects Modbus devices to SCADA systems. It reads meters, inverters, PLCs and drives over Modbus TCP, Modbus RTU (RS-485/RS-232) or RTU over TCP, and serves the data as an IEC 60870-5-104 or IEC 60870-5-101 controlled station (slave). Map registers to IEC points in a web dashboard: single and double points (also from register bits), measured values, step positions, bitstrings and energy counters, with any byte order, scaling, deadbands and time tags. SCADA commands are...

...Calculates separately incoming and outgoing traffic. Requirements: * Network tap or L2 Managed Switch with option to mirror traffic to specified port * Windows XP 32-bit (or better) * .NET Framework 4.0 (or better) * WinPcap 4.1.3 (in archive) * Microsoft Visual C++ 2015 Runtime (x86) (in archive) If your gateway is powered by Windows, you can try to run this app and select Network Interface which is connected to Local Network. It should work but I did not test it. L2 switch in this case is not required. =============== Donation balance $0 ===============

NOTE: Project has moved to github, including file downloads. SharpPcap is a cross-platform packet capture framework for the .NET environment, based on the famous pcap / WinPcap libraries. It provides an API for capturing, injecting, analyzing and building packets using any .NET language such as C# and VB.NET.

SerialWizard is a tool aiming to simplify development of RS232 based programs. It allows users to easily send data to any RS232 port and process any data received by a RS232 port. Actualy its name is a bit misleading as it may function as an Hex viewer

Windows easy file sharing in (LAN) local area network. Decentralize. Unified chat client. Torrent, Bit-Torrent networking.