Search Results for "ir receiver"

ShiftRC is a opensource design for a very cheap, small and simplistic rc driver/rc statemashine. mimics Nikola Tesla's boat it uses a shift chip with multiple outputs and one input for the radio or IR signal. This project is something I wanted to do for a while to make cheap and light weight custom rc chips, and I decided to make it a real project when I found a wooden single use spoon which I wanted to turn into a boat. this project will host multiple version, some very simple ones...

By using special coding it's possible to use a cheap IR LED and IR receiver as used in remote controls to make a simple infrared link between Arduinos using the built in serial port. The problem with RS232 is that it contains a DC component. By restricting the character set such that the DC component is eliminated, it's possible to send and receive data using a commodity remote control IR receiver. A Python program is used to identify the required codes and schematics are provided showing...

By leveraging a microcontroller RS232 port as both a modulation source and detector, it is possible to make a simple proximity or through beam type sensor for very little cost. A special bit pattern is used to eliminate any DC component in the RS232 signal making it compatible with the IR receiver.

Orvibo Allone is a infrared receiver transmitter this vb.net console app permits to learn ir codes from existing remote controllers and script them to be run in batch file

... that pigpiod may conflict with clock peripheral. When i2s-DAC available( pigpiod uses PWM). Else, PCM is used Default pins: IR/LED Module IR Out: GPIO 17 | Pin 11 Report to IR Receiver Model Specs LED1 : GPIO 27 | Pin 13 LED2 : GPIO 22 | Pin 15 Rotary Encoder Module: PEC12 A : GPIO23 | Pin 16 PEC12 B : GPIO 24 | Pin 18 PEC12 1 : GPIO 25 | Pin 22 LED1 Always ON LED2 ON when PLAY Pins can be changed in /home/volumio/script.volumio.service/addons.py MicroSD cards need to be expanded

Unofficial fork of OSMC for the Nuxii box. IR receiver, Leds and Rotary Encoder work out of the box. Use the script.xbmc.nuxii addon to work. SAMBA protocol installed. Background changed. Confluence default skin. Configured for France. Added pigpiod. Please note that pigpiod may conflict with clock peripheral. When i2s-DAC available( pigpiod uses PWM). Else, it uses PCM. Default pins: IR/LED Module IR Out: GPIO 17 | Pin 11 Report to IR Receiver Model Specs LED1 : GPIO 27...

... features unidirectional functionality, a single in-band tuner, standard definition decoding capabilities and a basic user interface for accessing one-way digital services. +Provides single 54 to 864 MHz all-digital tuner +Includes full inband +Delivers DSM-CC support for code download +Offers one-way device +Features front panel IR receiver and power LED

Simple infrared keyboard receiver for Atmels Microcontroller and several Keyboards. Using Lightweight USB Framework by Dean Camera for xmega and v-usb for mega.

Firmware and schematic for a USB HID compatible remote control consumer device using an Atmel AVR Atmega8. No drivers are needed for WindowsXP / WMP10 / Vista / Windows 7. Press Play/Stop/Pause and control media player directly from your remote control.

IRTuner is a DLL tuning interface supported by various home media applications. IRTuner allows these applications to tune your Set Top Boxes via a supported hardware IR trasmitter/receiver.