Search Results for "mcu"
Sort By:
Showing 59 open source projects for "mcu"
View related business solutions-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
1
Arduino core support for STM32
STM32 core support for Arduino
This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. -
2
GmSSL
Password toolbox that supports national secret
...It supports mainstream operating systems and processors including mobile terminals, and supports cryptographic keys, Cipher cards and other typical domestic cryptographic hardware provide feature-rich command line tools and multiple compiled language programming interfaces. GmSSL 3.0 greatly reduces memory requirements and binary code volume, does not rely on dynamic memory, and can be used in low-power embedded environments (MCU, SOC, etc.) National secret algorithm and SSL protocol are embedded in existing projects. The default CMake build system can be easily used with default compilation tools such as Visual Studio and Android NDK. Developers can also manually write Makefiles to compile in special environments, tailoring. -
3
PikaPython
An ultra-lightweight Python interpreter that runs with only 4KB of RAM
An ultra-lightweight Python interpreter that runs with only 4KB of RAM, and zero dependencies. It is ready to use out of the box without any configuration required and easy to extend with C. Similar projects: MicroPython, JerryScript. -
4
Betaflight
Open Source Flight Controller Firmware
...This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much more! Run the configurator on any device, whether it is using Windows, MacOS, Linux, or Android. With the Betaflight OSD you can get all relevant flight metrics directly into your FPV video feed. ... -
Save Up to 91% on Cloud Compute With Spot VMsRun batch jobs at 60-91% off with Spot VMs. Long-running workloads get automatic discounts with sustained use.
-
5
Arduino FOC
Arduino FOC for BLDC and Stepper motors
We live in very exciting times 😃! BLDC motors are entering the hobby community more and more and many great projects have already emerged leveraging their far superior dynamics and power capabilities. BLDC motors have numerous advantages over regular DC motors but they have one big disadvantage, the complexity of control. Even though it has become relatively easy to design and manufacture PCBs and create our own hardware solutions for driving BLDC motors the proper low-cost solutions are yet... -
6
StarFishDAQ
A general purpose data acquisition system and development platform.
The StarFishDAQ (or SFDQ for short) is a platform for developing MCU based hardware without having to start from scratch. It consists of hardware, firmware and software components. The SFDQ allows those projects that would otherwise use an off-the-shelf DAQ, PLC or MCU SBC to start with a stack of hardware, firmware and software. This allows more control, customization, and future applicability without sinking a ton of effort. -
7
Embedded IDE For VSCode
An embedded development environment on vscode
A mcs51/stm8/cortex-m/riscv microcontrollers development environment on vscode mcu supported: cortex-m, arm, mcs51(8051), stm8, riscv compiler supported: sdcc, keil_c51, iccstm8, armcc, armclang, gcc links: - docs: https://em-ide.com/ - home page: https://marketplace.visualstudio.com/items?itemName=CL.eide -
8
JxMake
A Java-based cross-platform build system.
...In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full support for building desktop applications is planned for future development. Building JxMake requires Java SDK 8 or later (note that Java SDK 8 is a Long-Term Support version). -
9
CH347 Multi-Function Interface Demo Sof
CH347 Multi-Function Interface Demo Software
...Each chapter of the software demonstrates the functions of each interface. The I2C interface implements temperature and humidity sensor data acquisition, the JTAG and SWD interfaces complete program download and debugging for FPGA and MCU, the UART interface meets basic serial communication requirements, the GPIO interface adapts to peripheral control pins, and the SPI interface drives the ST7798 LCD screen and implements image polling display. These functions work together to form a complete and reusable solution for CH347 peripheral control. -
Demo Series - Small Business Backup By VeeamWatch this on-demand demo series and learn how to protect your Microsoft 365 data with clear, simple, actionable steps that are easy to implement for businesses of all sizes.
-
10
Mecrisp-Stellaris Unofficial User Doc
Forth documentation: embedded Arm Cortex-M STM32xx microprocessors
Unofficial user documentation for the Mecrisp-Stellaris Forth programming language on ARM Cortex-M microprocessors. Includes a index, search function, projects, pictures and Youtube video links. This Documentation is designed for Forth Beginners. -
11
MoonLang is a lightweight static programming language built with C++ and LLVM, featuring dual syntax styles (`: end` and `{ }`). Supports Windows, Linux, macOS and embedded platforms (ARM/RISC-V/ESP32), compiles to only 15KB-300KB, build full-stack applications from MCU to desktop.
-
12
uIDE (Micro IDE)
uIDE (Micro IDE) is a free, open-source IDE for GPUtils
uIDE is a specialized development environment for programming PIC microcontrollers in assembly language. Built with Free Pascal and Lazarus, it offers a clean, efficient workspace for embedded systems developers working with Microchip's PIC processor family. -
13
STLINK
Open source STM32 MCU programming toolset
stlink is an open source toolset to program and debug STM32 devices and boards manufactured by STMicroelectronics. It supports several so-called STLINK programmer boards (and clones thereof) which use a microcontroller chip to translate commands from USB to JTAG/SWD. There are four generations available on the market which are all supported by this toolset. -
14
Midbar Firebase Edition
Midbar Firebase Edition stores data in the cloud, keeps keys on device
...The GitHub repository is available at github.com/Northstrix/Midbar-Firebase-Edition Tutorial for V1 https://www.instructables.com/DIY-IoT-Data-Vault-With-Google-Firebase/ Tutorial for V2 https://medium.com/@Northstrix/syncing-mcu-password-vault-with-desktop-app-using-google-firebase-28963e060444 Tutorial for V3 https://www.instructables.com/DIY-Advanced-IoT-Password-Vault-Synced-With-Deskto/ GitHub Repository: https://github.com/Northstrix/Midbar-Firebase-Edition -
15
-
16
Cipherbox
Cipherbox is a vault that utilizes six encryption algorithms.
This project is deprecated. Please refer to https://sourceforge.net/projects/midbar/ or https://sourceforge.net/projects/midbar-firebase-edition/ Cipherbox was my attempt to build a multi-user Midbar. Cipherbox is what I consider to be a cryptographic swiss knife. It utilizes six encryption algorithms, and it's also a vault that's locked with four RFID cards, your username, and password. Github: https://github.com/Northstrix/Cipherbox Tutorials for: V1.0:... -
17
HomeKit Accessory Development Kit (ADK)
HomeKit Accessory Development Kit (ADK)
...It implements the HomeKit Accessory Protocol (HAP) end-to-end, including pairing, authentication, encryption, and accessory/characteristic modeling so you can expose services like lights, locks, sensors, outlets, and bridges. The SDK factors the stack into clear layers—core protocol, transport, and platform shims—so vendors can port it to their MCU/RTOS or Linux/macOS targets with minimal changes. It provides example accessories and test harnesses that demonstrate pairing flows, event notifications, and state persistence. Discovery and session management integrate with the standard Home ecosystem, enabling accessories to be found, paired, and controlled by Apple devices with proper permissions. ... -
18
GUI-lite
The smallest header-only GUI library(4 KLOC) for all platforms
The smallest header-only GUI library (4 KLOC) for all platforms. Cloud + IoT Solution: master your IoT business all over the world. Multi-language supports UTF-8; Playback Video. Toolkit for building font/image resources. Code Telemetry and Analysis in real-time (remove .sh/.bat files if dislike sharing). Even a C beginner could master GUI-lite quickly. The source code only uses basic C++ features (class, virtual function). We chose C++ as it could make the code size significantly smaller... -
19
simutron
AVR simulator IDE
...Internally this program uses the open source Simavr AVR Processor Simulator (https://github.com/buserror/simavr) and wraps all its functions in a GUI shell. Setups for firmware debugging scenarios can be created dynamically. Able to run 16MHz MCU with decent set of external parts in real time. In particular this can be used for development of CNC firmware in conjuction with its CAM frontend without access to the real hardware. For Linux and Windows systems. Please visit wiki pages (https://sourceforge.net/p/simutron/wiki/Home/) for instructions -
20
Integrated Development Environment for some microcontrollers based on 8051(e.g. AT89S8253). Supported languages are Assembly and C. It has its own simulator, assembler, editor and many other tools. See the project web site for more details and the newest updates.
-
21
MCU live explorer
A project for simple and deep microcontroller unit management.
This project is in beta phase and actually configured for ARM Cortex® M3 MCU, tested with stm32f103c8t6 "blue pill" Reference for configuration: RM0008 Reference manual STM32F101xx, STM32F102xx, STM32F103xx, STM32F105xx and STM32F107xx advanced Arm®-based 32-bit MCUs document available on STMicroelectronic official site Need be installed as prerequistite PYSWD, a python module for debugging microcontrollers with SWD using ST-Link/V2 (/V2-1) debugger available at https://github.com/cortexm/pyswd -
22
libtdata
Libtdata is a C library implements trees, index allocation and bit ops
Libtdata is a small and portable C library implements a set of various search data structures, bit operations and index allocation. -
23
SGB180 CCU module
SmartGekko team SGB180 module software
The SmartGekko team is repesented for you SGB180 Central Controller Unit module, based on MSP430FR5994 MCU. The main goals of our SGB180 module are: LOOOT of free using GPIO pins. For SGB180 - 64 pins LOOOT of CODE memory. 256KB All pins are grupped by Ports, in according to MSP430FR5994 Datasheet info. All Pins Support Capacitive-Touch Capability With No Need for External Components 1.8 V to 3.6 V VCC Ultra low consuption (30nA in Sleep mode, 450 nA in Stand-By mode with RTC, 120 μA/MHz in Active mode) Five Power modes All external circuits are placed on PCB. ... -
24
vnop
An open source ISP programmer for 89S MCU, USB interface.
Open source ISP programmer for 89S MCU, USB interface, support Windows, Linux... -
25
Timer Calculator for any MCU
Tired of boring calcs? Let me simplify your Timer based projects.
A simple program that calculates up to 6 parameters to help you using Timers. It is done to be used with ever single MCU (PIC, ATMEL, Freescale, etc) and plataform (Arduino, Raspberry, Edison, etc). Just enter yours parameters and let the program calculate all the needed values to help you. It also saves a .txt file with results, if you need to see it again later and save your inserted values (no one likes to retipe values everytime, right?) Isn't program translated to your language? ...