Search Results for "gpio"
Sort By:
Showing 53 open source projects for "gpio"
View related business solutions-
Red Hat Ansible Automation Platform on Microsoft AzureDeploy Red Hat Ansible Automation Platform on Microsoft Azure for a strategic automation solution that allows you to orchestrate, govern and operationalize your Azure environment.
-
Secure remote access solution to your private network, in the cloud or on-prem.OpenVPN is here to bring simple, flexible, and cost-effective secure remote access to companies of all sizes, regardless of where their resources are located.
-
1
pi-gpio
A dynamic C library to control Raspberry Pi GPIO channels
A dynamic C library to control Raspberry Pi GPIO channels Supports all production models / all SOC This library has code to:- Read Raspberry Pi Information Perform basic GPIO functions • Set gpio as input or output • Read/Write gpio • Set pullup/down of gpio • Read the current gpio mode • Read gpio pull/up down (Pi4/BCM2711 only) Software PWM on all pins Hardware PWM support Read/Set PAD drive, hysteresis & slew settings I²C SPI -
2
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface... -
3
Phoniebox
A Raspberry Pi jukebox, playing local music, podcasts, web radio
Phoniebox is a contactless jukebox for the Raspberry Pi, that plays audio files, playlists, podcasts, web streams, and Spotify triggered by RFID cards. All plug and play via USB, no soldering iron needed. It also features GPIO button control support. -
4
SPI FLASH Library for STM32
W25qxx, N25Qxx and other SPI FLASH driver for stm32 HAL
W25qxx, N25Qxx, and other SPI FLASH drivers for stm32 HAL. -
The #1 Embedded Analytics Solution for SaaS Teams.Qrvey’s comprehensive embedded analytics software enables you to design more customizable analytics experiences for your end users.
-
5
Flipper Zero Firmware
Flipper Zero firmware source code
... protocols, and debug hardware using GPIO pins. The idea of Flipper Zero is to combine all the hardware tools you'd need for exploration and development on the go. Flipper was inspired by the pwnagotchi project, but unlike other DIY boards, Flipper is designed with the convenience of everyday usage in mind — it has a robust case, handy buttons, and shape, so there are no dirty PCBs or scratchy pins. Flipper turns your projects into a game, reminding you that development should always be fun. -
6
Gobot
Golang framework for robotics, drones, and the Internet of Things
Gobot makes controlling robots and devices incredibly simple and fun. This program connects to an Arduino, and toggles an LED, every one second. Support for devices that use Analog Input/Output (AIO) communication have a shared set of drivers provided using the "gobot/drivers/aio" package. Support for devices that use General Purpose Input/Output (GPIO) communication have a shared set of drivers provided using the "gobot/drivers/gpio" package. Gobot has a extensible system for connecting... -
7
raspberry-gpio-python
A Python module to control the GPIO on a Raspberry Pi
To get started with RPi.GPIO, it would be worthwhile reading the examples in the project wiki (link above). Note that this module is unsuitable for real-time or timing critical applications. This is because you can not predict when Python will be busy garbage collecting. It also runs under the Linux kernel which is not suitable for real time applications - it is multitasking O/S and another process may be given priority over the CPU, causing jitter in your program. If you are after true... -
8
NSLadder
Ladder editor and debugger
NSLadder is a complete PLC manager based on the Ladder diagram, it generates code that can be directly assimilated by the PLC controller (arduino, raspberry, arm cpu....) NSLadder also allows simulation without a PLC connected Ladder is one of the best visual programming languages is a PLC programming language called ladder diagram (LD) or instructions list (IL). The main strength of lader is the visual representation that is more representative than most programming languages, so... -
9
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple... -
Bright Data - All in One Platform for Proxies and Web ScrapingBright Data offers the highest quality proxies with automated session management, IP rotation, and advanced web unlocking technology. Enjoy reliable, fast performance with easy integration, a user-friendly dashboard, and enterprise-grade scaling. Powered by ethically-sourced residential IPs for seamless web scraping.
-
10
jfModbusServer
Modbus server designed for Raspberry PI to control GPIO/I2C devices.
jfModbusServer is a Modbus Server for the Raspberry PI 2/3. Remotely access GPIO pins and read/write I2C devices. Requires Java. -
11
Raspberry PI Garage Door Closer
Raspberry Pi base Garage Door Monitor and Automated Closer
Raspberry Pi base Garage Door Monitor and Automated Closer. With connected camera, and infrared sensor it can take movies, pictures, and send notification emails about events. -
12
WoodboxPlayer
A simple MP3 and web radio player for the Raspberry Pi
The WoodboxPlayer is a Java-based MP3 and web radio player intended for the single-board computer "Raspberry Pi". It can be controlled either via keyboard or via push-buttons connected to the Raspberry Pi's GPIO pins. -
13
eCScope
Oscilloscope like software for measure data with INA260 chips
Freeware software for Raspberry PI 4B+ using GPIO and I2C connections with a hardware board with a 30 cm I2C cable (seed or qwicc) or 2m (proprietary eComet). Hardware will be available soon at http://electromaker.io. main features: max 150s measurement time, load measurement data to CSV file, measurement calibration, parallel measurement of 4 values, scale zoom in out, and move at X and Y axes For news and updates see twitter page. -
14
Kalliope
Kalliope is a framework to create your own personal assistant
Kalliope is a modular always-on voice-controlled personal assistant designed for home automation. Kalliope is a framework that will help you to create your own personal assistant. The concept is to create the brain of your assistant by attaching an input signal (vocal order, scheduled event, MQTT message, GPIO event, etc..) to one or multiple actions called neurons. You can create your own Kalliope bot, by simply choosing and composing the existing neurons without writing any code. But, if you... -
15
First goal of the project is to create a C Library to easily use the GPIO of a raspberry PI 3 Under linux (currently raspbian jessie). Second goal is to create a program in order to dump cartridges of a 1970's videopac game console. Such a program run under raspberry PI 3 with the use of a dedicated hardware board.
-
16
GassistPi
Google Assistant for Single Board Computers
Google Assistant for Single Board Computers. In May of 2017, Google Released it’s AIY Projects kit. Initially not many had access to it, so that is when I started modifying the Google Assistant SDK adding AIY like features to help out the ones left without the kit. Every project requires a name and so I named it GassistPi (“G”oogle “Assist”ant on “Pi”). Fast forwarding to date, the project works not only on Pi boards but on a number of other platforms. It has some interesting custom actions... -
17
Metal detector based on RP2040
Pulse induction metal detector using Raspberry Pi Pico board ( RP2040)
Based on Raspberry Pi Pico board, this metal detector is included in pulse induction metal detectors category, with well known advantages and disadvantages. RPi Pico generate 3,3v amplitude pulses at one of GPIO pins. This pulses are amplified and applied to a MOSFET device that had the searching coil in series with drain. The pulse will produce a magnetic field generated by the searching coil, and becose of eddy currents, the target will produce a very low corresponding voltage... -
18
Raspberry Pi Push Notifications
Notifications to phone from Raspberry PI for GPIO connected devices
This software is for delivering push notifications to remote devices such as smartphones and tablets from a Raspberry Pi when the Raspberry Pi is connected through its GPIO pins to a device which holds a relay or electronic switch temporarily closed when activated. An example of such as device is a Dakota Alert break beam sensor. -
19
xSMBus - Java I2C/SMBus API
USB Bridge for SMBus(I2C), GPIO, and Clock, Java API
[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus... -
20
Lin-guider is an astronomical autoguiding program for Linux. It supports Philips, Logitech, uvc webcams, QHY5, QHY6, DSI2PRO, QHY5L-II-M, QHY5L-II-C, QHY5-II, ATIK, Starlight Xpress, ZWO ASI astrocams for video and FTDI chip-based, parallel port-based (LPT), GPIO-based, GPUSB devices, Nexstar-protocol based and QHY5, QHY6, QHY5L-II-M, QHY5L-II-C, QHY5-II, ATIK, Starlight Xpress, ZWO ASI astrocams for pulse guiding. Starlight Xpress ltd. is helping this project http://www.sxccd.com/
-
21
ocapi
C-level driver collection for MSP430 and derivatives
ocapi is an open source driver collection for MSP430 and derivative processors. It provides a C language application programming interface (API) for deploying individual processor capabilities. Current modules support serial communication via UART, I2C and SPI, digital I/O (GPIO), analog-to-digital conversion (ADC), Timers and so on. ocapi aims at being independent of the development host platform. So it should work, no matter if you live in the Windows, Linux or Mac world. ocapi is used... -
22
PiTherm
A CPU Temperature display for Raspberry Pi
Read the temperature, display it on this neat little 10-LED muticolor array. The array has, in order, BGGGGYYYRR LEDs. This first version is a trivial program that scans the CPU temp and uses 10 GPIO pins, one for each LED. -
23
SingleLineIO
Linux Kernel Input/Output Driver for one single GPIO line
This driver allows to share one GPIO line for user IO with a key and a buzzer. The buzzer is operated with software PWM. As long there is no output the line is used to detect keypress events via IRQ. -
24
MCU live explorer
A project for simple and deep microcontroller unit management.
This project is in beta phase and actually configured for ARM Cortex® M3 MCU, tested with stm32f103c8t6 "blue pill" Reference for configuration: RM0008 Reference manual STM32F101xx, STM32F102xx, STM32F103xx, STM32F105xx and STM32F107xx advanced Arm®-based 32-bit MCUs document available on STMicroelectronic official site Need be installed as prerequistite PYSWD, a python module for debugging microcontrollers with SWD using ST-Link/V2 (/V2-1) debugger available at... -
25
SGB180 CCU module
SmartGekko team SGB180 module software
The SmartGekko team is repesented for you SGB180 Central Controller Unit module, based on MSP430FR5994 MCU. The main goals of our SGB180 module are: LOOOT of free using GPIO pins. For SGB180 - 64 pins LOOOT of CODE memory. 256KB All pins are grupped by Ports, in according to MSP430FR5994 Datasheet info. All Pins Support Capacitive-Touch Capability With No Need for External Components 1.8 V to 3.6 V VCC Ultra low consuption (30nA in Sleep mode, 450 nA in Stand-By mode with RTC, 120 μA...