Search Results for "usb linux" - Page 22
Sort By:
Showing 1584 open source projects for "usb linux"
View related business solutions-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
Build Data Resilience - Take the Assessment TodayIs your recovery strategy as strong as you think? Take this quick self-assessment to check your recovery readiness and gain tailored insights. In only 2 minutes, you'll learn where you fall on the recovery readiness scale.
-
1
Panoramic RTL-SDR directly
Open source RTL-SDR Panoramic Spectrum Analyzer
This utility 'rtl_sdr_panorama.exe' designed for panoramic imaging spectrum REALTIME any (reasonable) band by accumulating within 0.5 second spectral samples of limited bandwidth for simultaneous monitoring (speed via USB, usually within 2...3 MHz) c DVB- chip based RTL-2832/R820 (13...1864 MHz). Controlled parameters: 1. Dongle Phone system. 2. Initial scan, Hz. 3. Endpoint scan, Hz . 4. Spacing scanning ediitsy tens kHz/MHz. 5. Noise level, dB. 6. Magnitude clock frequency... -
2
电鼓训练
电鼓基本功训练
电鼓训练软件接收连接到Mac/Windows/Linux主机的MIDI信号，判断使用者所进行的节奏训练是否正确，并以图形化的方式展示出来。 使用方法： 1 将电鼓通过USB线连接到电脑主机上。 2 进入软件，点击红色的开始按钮，然后设定好节拍器的速度。 3 打开节拍器的音量开关。 4 按照节拍器的速度用鼓槌敲击军鼓（或其他鼓和镲片），直到赛车跑完一圈，节拍器停止。 5 敲击越稳定，赛车的速度越快。敲击不稳定，车速会降低，而且车身会偏离中心赛道。 6 也可以切换到图形展示界面，观察敲击稳定性和力度控制情况。 7 点击摄影机按钮可回看最近一段时间的练习情况，也可以通过音频回放练习的过程。 8 点击顶部控制台中间的秒表，打开节拍器，进行下一轮练习。 9 使用键盘也可以控制赛车。 -
3
QTc66
Linux Qt application for reading the RD TC66
Linux Qt application for reading the Rui Deng TC66/TC66C USB Power Meter data and export it in CSV format. As manufacturer doesn't develop a Linux application for reading the device through USB, I've develop a simple one. It's based on the following projects: - https://github.com/Ralim/TC66C - https://github.com/kolinger/rd-usb This application has been made with QtCreator and depends on QtCharts library, so you must install it for compiling. ... -
4
NVG599
residential gateway VDSL CPE with 802.11a/b/g/n/ac wifi, ...
The NVG599 is a residential gateway VDSL CPE with 802.11a/b/g/n/ac wifi, 4 port ethernet switch, 1 EWAN port, 2 voice ports, HPNA port and a USB port. -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
NVG589
Source Code content for Open Source packages used by the NVG589
Source code content for Open Source packages used by the NVG589, which is a residential gateway VDSL CPE with 802.11n wifi, 4 port ethernet switch, 1 EWAN port, 2 voice ports, HPNA port and a USB port. -
6
SHT
Simple Hid Terminal
HID devices communication -
7
ExImager Project
Create SD/USB backups quickly and easily.
ExImager Project is a very light software which allows to make backups of perfect size of SD / USB, it is able to make backups of OS in only a few minutes (for larger OS), compared to Win32DiskImager (and other ) which take 30 minutes to make an OS backup (of 2GB) while ExImager Project takes only about 3 minutes and is exactly the same size as the OS which was written, ExImager can also make compressed backups with an example (.ZIP - .GZ - .TGZ). And it also has a very fast OS writing... -
8
flash boot builder
to create bootable usb from windows 7,8,10
Flash Boot Builder 2020 Program, the second version of installing Windows from the flash with one click and without deleting the existing data or formatting of the flash; the program will allow you to use multiple flash as a folder and data transfer in addition to it being bootable any bootable, since you can install any type of Windows from Flash whether Windows Vista, 7, 8, 8.1 or Windows 10. -
9
Relax-and-Recover
Linux disaster recovery and system migration solution
** This project has moved to a new location: http://relax-and-recover.org/ ** Relax-and-Recover (Rear) is the leading Open Source disaster recovery solution, and successor to mkcdrec. It comprises of a modular framework and ready-to-go workflows for many common situations to produce a bootable image and restore from backup using this image. As a benefit, it allows to restore to different hardware and can therefore be used as a migration tool as well. Currently Relax-and-Recover... -
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
10
DevuanOS
Buils your own Devuan Linux Live in 10 Minutes with Debootstrap
Only need to Execute 5 Scripts in a Xubuntu Virtual Machine and get your own Live Devuan Linux Distro created. GITHUB: https://github.com/dinooz/devuanos Have u ever like to have your own Devuan Linux Distribution ? Have you ever like to have a lean distro with only specific packages ? Have you ever wanted a Devuan Linux distro with the assurance of what is installed ? TODO: Setup an Hard Drive/USB Installation wizard. to make it really easy. ... -
11
Grub ISO Adder
Add ISO to grub menu to boot it from HD.
Add ISO to grub. For KDE. Combination service-menu/script. Right-click on the ISO to add it to your grub menu. Works with *buntu and KDE neon ISOs. Code on https://github.com/donaldbrian/addiso Warning: last version could cause problems with some ISOs. Latest version is patched. Please read the Wiki. -
12
yad2xx
Yet Another JNI-D2XX Interface Project
A Java Native Interface (JNI) library suitable for communicating with a range of USB interface chips from FTDI via the D2XX driver. It currently supports OS X 10.10+ and Windows 7/8 x64. On OS X, the 64 bit JVM is supported. On Windows, support is limited to the 64 bit JVM (Java 1.8 is now 64 bit). Version 1.0 --------------------------------- - Java 8 - SPI support and sample (via MPSSE) -
13
FOR ZUK Z2 PLUS -PIE ONLY!! 1.Wifi monitor and injection mode support enabled. 2.USB MODEM CDC ACM and Proxmark and similair devices support enabled(*NEW*)
-
14
KL-G2 Printer Utility
Casio KL-G2 Printing for Linux
This program prints a PBM file using a Casio KL-G2 Label Printer connected via USB on Linux. Also supports manual feed/cut and controls most of the printer options. -
15
Lonero OS
The Decentralized Operating System
The best USB Flash method is using Rofus to create a bootable USB Most common problem + easy fix: https://askubuntu.com/questions/985612/running-ubuntu-from-a-usb-failed-to-load-ldlinux-c32 Please note: default password is pass Lonero OS is based off of the Lubuntu OS, and has a few adding things such as: 1) The uncompiled source binaries of: GitPrep, SMesh, Kademlia, Beaker Browser, and VPNBook 2) Telegram Desktop installed 3) DuckDuckGo should be the default browser This project... -
16
Supermarket Managment
Application to control a market
It´s a control system that you can use in a market to control your inventory or to collect the money of your clients. It´s simple but efficent and it gives you a summary of all your sales. You can use it with an USB bar code reader.It´s in Spanish, but if you´re interested to take it in English, please send me an e-mail to o.fernandez@edu.uah.es. I have updated a new version that allows to have more than one computer, with a server where you insert the products and the other JAR File is to... -
17
Iron Desktop X, Это переносная операционная система на базе ubuntu если у вас комп запаролен то через флешку можно загрузиться
-
18
Velleman K8055 USB Experiment Interface Board driver. This driver provides a /proc interface which allows the inputs and outputs of the K8055 to be accessed as if they were files, making the K8055 accessible from any programming language and the shell. In addition to the /proc interface a joystick/input device is created for each K8055, Optionally a (user provided) script can be executed by the driver when it detects a change on one of the inputs or outputs.
-
19
lxardoscope
Oscilloscope using ATmega328 or Arduino Uno for data acquisition
LXARDOSCOPE is a dual channel oscilloscope application for Linux, using an ATmega328 device for data acquisition, and a serial or a USB port for communication with the PC. The Look and Feel is close to a traditional oscilloscope. Sampling rate for version 0.95 is about 2350 samples per second, for each channel. Originally designed for Arduino Uno, but works best with an Atmega328 and a TTL/USB converter. *** NEW: a preamplifier is presented which provides an input range of -4V to +6V for DC with 10mV resolution and a +/-0.5V for AC with 1mV resolution, with standard 1MegOhm input impedance. -
20
Snare Lite (SIEM & Logging Software)
Snare Enterprise: bit.ly/Snare-Trial
ATTENTION: Snare Lite is unsupported legacy software. While it will remain a part of the SourceForge community, it is no longer secure and compliant. For up to date Snare software check out Snare Enterprise. https://www.snaresolutions.com/try-snare-for-free/ Snare Enterprise was created to keep up with the fast paced security software market. It started with the desire to create premium logging and SIEM tools that were agnostic by nature so they could be used to boost any SIEM... -
21
JPasswords
Java password management tool
...Storage of huge text documents and sets of images feasible. File format relies on "Password Safe" V3 files (Twofish-CBC). Compact cross-platform program with PORTABLE modus, ideal for USB sticks, Linux, Mac, etc. Requires Java JRE 1.8 or higher The Password Safe database library is available at project PWSLIB3. For license/usage questions visit the Wiki pages! -
22
mx-19-1-kde-by-jki
Just-Kiss-It With Love For MX Linux Sporting the KDE Plasma Desktop !
...I've had varying levels of success with marrying MX Linux & Plasma over several years, and this is the best Respin I've tried. I've used it live on a USB, installed it on several older machines & VirtualBox. It runs great! (recommending at least 4 GB RAM, 8GB is better. It IS KDE Plasma!) (Use 3D Acceleration & VMSVGA Settings in VirtualBox) Yeah, it's a Personal Respin with Persistence. -
23
CUPS back-end for the canon printers using the proprietary USB over IP BJNP protocol. This back-end allows Cups to print over the network to a Canon printer. The design is based on reverse engineering of the protocol. Version 2.0 adds ink-level reporting and improved out-of-paper detection. Version 2.0.1 is now released under GPLv2 or later to be compatible with the changed cups license. No other changes. Version 2.0.2 fixes a compile error with GCC9 Version 2.0.3 Fix GCC10...
-
24
The Wis-Go7007 is a Driver for the Plextor ConvertX PX-M402U. ConvertX is a USB-Box that digitized analog videos. The operation is simple: You can take the command line or the GUI (Gogo Mini). For more information download the "readme.txt".
-
25
Global Automation
automation for agricultural, residential and commercial
Control 8-channel USB relay from Raspberry PI.
