Search Results for "http-client" - Page 2

Make your Raspberry Pi to a Wi-Fi controllable LED Light using LED stripes with WS 2811 controller. This software enables the raspberry to provide a web server interface (HTTP / Rest) for controlling the connected LED stripe. That project bases on the WiringPi lib, Indy for Lazarus and also on the Tinkerforge bindungs for Lazarus. The Stripe must be connected with the Tinkerforge Masterbrick and the LED-Stripe bricklet. WiringPi is used to control the GPIOs for some feature and Indy (Internet Direct) is used to support all network feature like UDP-broadcasting and handling the HTTP-requests. ...

MQTT protocol client library for MetaTrader.

...This SDK implements the specific protocol for Thing Shadows to retrieve, update and delete Thing Shadows adhering to the protocol that is implemented to ensure correct versioning and support for client tokens.

JSTx is used for displaying overlay graphics and text on top of a Philips television, changing channels, receiving remote control keys and changing television display modes. It is a command line utility to execute jointSPACE commands on a device that supports the jointSPACE protocol for Philips televisions (see http://jointspace.sourceforge.net for details on jointSPACE, which is based on DirectFB). It is used in various home automation/internet-of-things projects. There are three versions: 0.23 for 2009/2010 Philips televisions (xxx5 en xxx4 series), 0.24 for 2011-2012 televisions (xxx6-xxx7) and 0.24_2013 for 2013-2014 televisions (xxx8-xxx9 (only non-Android)). ...

...NodeManager is intended to take care on your behalf of all those common tasks a MySensors node has to accomplish, speeding up the development cycle of your projects an including the following main components: - Sleep manager: allows managing automatically the complexity behind battery-powered sensors spending most of their time sleeping - Power manager: allows powering on your sensors only while the node is awake - Battery manager: provides common functionalities to read and report the battery level - Remote configuration: allows configuring remotely the node without the need to have physical access to it - Built-in sensors: provide embedded code so to allow their configuration with a single line of common sensors Source code on http://github.com/mysensors/NodeManager

Firmware for ESP8266 modules. http://www.esp8266.nu/index.php/Tutorial_ESPEasy_Firmware_Upload Use an ESP8266 module as a wireless sensor for temperature, humidity, barometric pressure, LUX, etc. Or use it as an actuator to control Relays. Supports the following Home Automation platform protocols: * Domoticz HTTP * Domoticz MQTT * OpenHAB MQTT * PiDome MQTT * Nodo Telnet * ThingSpeak webservice * EmonCMS * FHEM HTTP * Generic HTTP using templates Supported devices: * DS18B20 * DHT11 * DHT22 * BH1750 * BMP085 * Wiegand RFID * PN532 * SI7021 * TSL2516 * HCSR04 * TSOP4838 IR * MCP23017 * PCF8591 * PCA9685 * LCD and OLED displays * BME280 * INA219 * MLX90614 * ADS1115 * MSP5611 * BMP280 * SHT1x The ESP is web configurable for both Wifi setup and device configuration. ...

A simple and powerfull MQTT Lightweight Windows Client - beta version! Sources: https://github.com/edwardmartinsjr/MQTTLightweightClient

...Currently the SDK is available to connect to Velisphere via the AMQP message queuing protocoll, releases for MQTT and ReST will follow. This is still work in progress and will continue to evolve over time. To create your own account for free, go to http://www.velisphere.com

This project is a low cost & lowpower Datalogger based on BeagleBone Black. The data logger is an electronic device that records earthquakes(Sensor network), Wind ,daylight ,power used/produced on the street lamp over time. Data will then be uploaded via a wireless radio MESH network(868 Mhz) to a database server for later analyze. The Prototype is developed on two microcontrollers(AVR and ARM Cortex-A8) with the low power and

A library that includes a Java MQTT client API that can be used in both synchronous and asynchronous applications. The library also includes various MQTT applications including a proxy that allows a server cluster to be load balanced as a single MQTT client; an HTTP <-> MQTT gateway; a mock MQTT broker; etc

OWLOS Open source network operating system for managing IoT devices: - does't require internet access or additional servers - ready to connect sensors, actuators, LCD, DHT, Stepper and other devices - does't require programming skills - built-in user interface - use web browser to access and manage your OWLOS nodes - built-in RESTful server - built-in MQTT client - at the same time WiFi access point and station, in any combination: - can be used autonomously - can work on a local network can work via the Internet can integrate with other nodes running under OWLOS - organizing an internal network. without using a servers available in source code