Search Results for "use"
Sort By:
Showing 134 open source projects for "use"
View related business solutions-
Free CRM Software With Something for EveryoneThink CRM software is just about contact management? Think again. HubSpot CRM has free tools for everyone on your team, and it’s 100% free. Here’s how our free CRM solution makes your job easier.
-
The #1 Embedded Analytics Solution for SaaS Teams.Qrvey’s comprehensive embedded analytics software enables you to design more customizable analytics experiences for your end users.
-
1
DS4Windows
DS4Windows allows you to use a DualShock 4 Controller on your PC
DS4Window is an open-source program that will allow someone to get the experience of using a Playstation 4 DualShock Controller on a PC by emulating a Xbox 360 Controller. -
2
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much more... -
3
ESP8266 Arduino Core
ESP8266 core for Arduino
ESP8266 Arduino Core is the Arduino core for the ESP8266 WiFi chip. It brings support for the ESP8266 chip to the Arduino environment, allowing you to write sketches, use familiar Arduino functions and libraries, and run these directly on ESP8266 without the need for an external microcontroller. ESP8266 Arduino core comes with libraries that enable it to perform a number of things. It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS servers... -
4
Tasmota
Alternative firmware for ESP8266 with easy configuration
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits... -
Secure remote access solution to your private network, in the cloud or on-prem.OpenVPN is here to bring simple, flexible, and cost-effective secure remote access to companies of all sizes, regardless of where their resources are located.
-
5
NeoPixelBus
An Arduino NeoPixel support library
An Arduino NeoPixel support library supports a large variety of individually addressable LEDs. Please refer to the Wiki for more details. Please use the gitter channel to ask questions as the GitHub Issues feature is used for bug tracking. A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most... -
6
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present... -
7
WS2812FX
WS2812 FX library for Arduino and ESP8266
This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each segment's... -
8
Redshift JDBC Driver
Redshift JDBC Driver. It supports JDBC 4.2 specification
... the driver jar file and all required dependencies files to use AWS SDK for the IDP/IAM features. -
9
FKILL
Cross-platform tool to kill processes
To kill a port, prefix it with a colon. For example: :8080. Run without arguments to use the interactive interface. Run fkill without arguments to launch the interactive UI. Force kill processes that did not exit within the given number of milliseconds. Kill all child processes along with the parent process. (Windows only). Ignore capitalization when killing a process. Note that the case is always ignored on Windows. Suppress all error messages. For example: Process doesn't exist. -
Red Hat Ansible Automation Platform on Microsoft AzureDeploy Red Hat Ansible Automation Platform on Microsoft Azure for a strategic automation solution that allows you to orchestrate, govern and operationalize your Azure environment.
-
10
ThingPulse ESP8266 Weather Station
ESP8266 Weather Station library supporting OpenWeatherMap
This code works best with the NodeMCU V2 ESP8266 module and an 0.96" OLED display. To get you up and running in no time we created a kit that contains all the necessary parts. By buying this and other kits from us you are funding the maintenance and development of this library. Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. If you are using the PlatformIO environment for building, choose one of the available IDE integration or the Atom-based IDE... -
11
pq
Pure Go Postgres driver for database/sql
In most cases clients will use the database/sql package instead of using this package directly. Similarly to libpq, when establishing a connection using pq you are expected to supply a connection string containing zero or more parameters. A subset of the connection parameters supported by libpq are also supported by pq. Additionally, pq also lets you specify run-time parameters (such as search_path or work_mem) directly in the connection string. This is different from libpq, which does... -
12
Hotkeys
A robust Javascript library for capturing keyboard input
HotKeys.js is an input capture library with some very special features, it is easy to pick up and use, has a reasonable footprint (~3kb) (gzipped: 1.73kb), and has no dependencies. It should not interfere with any JavaScript libraries or frameworks. You will need Node.js installed on your system. Or manually download and link hotkeys.js in your HTML, It can also be downloaded via UNPKG. react-hotkeys is the React component that listen to keydown and keyup keyboard events, defining... -
13
Hangfire
An easy way to perform background job processing
An easy way to perform background processing in .NET and .NET Core applications. No Windows Service or separate process required. Backed by persistent storage. Open and free for commercial use. Easy to set up, easy to use. No Windows Service, no Windows Scheduler, no separate applications required. Background jobs are regular static or instance .NET methods with regular arguments, no base class or interface implementation required. Once a background job was created without any exception... -
14
NanoKVM
Affordable, Multifunctional, Nano RISC-V IP-KVM
Lichee NanoKVM is an IP-KVM product based on LicheeRV Nano, inheriting the extreme size and powerful features of LicheeRV Nano. The Lichee NanoKVM is available in two versions: NanoKVM Lite is a basic configuration that is suitable for individual users with certain DIY capabilities and enterprise users with bulk requirements. The NanoKVM Full is a full version with a sophisticated case and complete accessories, as well as a built-in system mirror card that is ready to use at boot... -
15
Particle Firmware for the Electron, P1
Device OS (Firmware) for particle devices
The Photon uses an ARM Cortex M3 CPU based microcontroller. All of the code is built around the GNU GCC toolchain offered and maintained by ARM. The build requires version 5.3.1 20160307 or newer of ARM GCC and will print an error message if the version is older than this. In order to turn your source code into binaries, you will need a tool called make. Windows users need to explicitly install make on their machines. Make sure you can use it from the terminal window. The entire Particle... -
16
HttpKernel Component
A structured process for converting a Request into a Response
The HttpKernel component provides a structured process for converting a Request into a Response by making use of the EventDispatcher component. It's flexible enough to create full-stack frameworks, micro-frameworks or advanced CMS systems like Drupal. Every HTTP web interaction begins with a request and ends with a response. Your job as a developer is to create PHP code that reads the request information (e.g. the URL) and creates and returns a response (e.g. an HTML page or JSON string... -
17
Asuswrt-Merlin
Alternative firmware for Asus wireless routers
Asuswrt-Merlin is a third party firmware for select Asus wireless routers. Based on the Asuswrt firmware developed by Asus, it brings tweaks, new features and other improvements to the original firmware, while retaining its performance and ease of use. Note that only downloads are hosted on SF.net - the complete source code can be found on https://github.com/RMerl/asuswrt-merlin (legacy 380.xx) and https://github.com/RMerl/asuswrt-merlin.ng (382 and newer releases). -
18
IPMI Management Utilities
Manage and interpret IPMI systems with common a software tool
ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments. -
19
OpenOCD - Open On-Chip Debugger
The Open On-Chip Debugger
The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets. -
20
DS3Windows
DS3Windows allows you to use a DualShock 3 Controller on your PC
DS3Window is an open-source program that will allow someone to get the experience of using a Playstation 3 DualShock Controller on a PC by emulating a Xbox 360 Controller. ⚠️Sometimes Windows will show unknown application error, click "More info" then click "Run anyway". -
21
myFP2ESP32 WiFi ASCOM Focus Controller
ASCOM-INDI ESP32 Wifi focuser
... to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download https://youtu.be/90KeSspN3e0 -
22
... adapters that support the 802.11n Wi-Fi standard. These adapters could be internal (like those built into laptops or desktop motherboards) or external (such as USB Wi-Fi dongles). Specifically, the driver is commonly associated with devices that use certain chipsets, like those made by companies such as Realtek, Atheros, Ralink, or Broadcom.
-
23
Arduino Nano Dew Controller Pro (DIY)
Dew Controller Feature Rich
A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older myDCP2... -
24
SnapKey
SnapKey: Open Source Alternative to Snap Tap & SOCD
SnapKey is a lightweight, open-source tool that operates from the system tray and is designed to track inputs from the WASD keys, without interfering with any game files. SnapKey's main role is to recognize when these keys are pressed and automatically release any previously engaged commands for them. This guarantees responsive and precise input handling. SnapKey handles the WASD keys by default and lets you rebind them to your liking via the config file. SnapKey: Open Source... -
25
ASCOM DarkLight Cover/Calibrator
DIY project to build an ASCOM compliant flip/flat panel
... in ASCOM v6.5 or newer. While this device DOES NOT make the scope weatherproof, it is an excellent addition to any observatory to accomplish hands-off control of the cover. If elected, it can be expanded to include a hands-off dark/light calibration capability for astrophotography. (c) Copyright Nathan Woelfle 2024. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author.