Search Results for "use"
Sort By:
Showing 267 open source projects for "use"
View related business solutions-
HubSpot is an AI-powered customer platform with all the software, integrations, and resources you need to connect your marketing, sales, and customer service. HubSpot's connected platform enables you to grow your business faster by focusing on what matters most: your customers.
-
SKUDONET ADC, operates at the application layer, efficiently distributing network load and application load across multiple servers. This not only enhances the performance of your application but also ensures that your web servers can handle more traffic seamlessly.
-
1
DS4Windows
DS4Windows allows you to use a DualShock 4 Controller on your PC
DS4Window is an open-source program that will allow someone to get the experience of using a Playstation 4 DualShock Controller on a PC by emulating a Xbox 360 Controller. -
2
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much more... -
3
ESP8266 Arduino Core
ESP8266 core for Arduino
ESP8266 Arduino Core is the Arduino core for the ESP8266 WiFi chip. It brings support for the ESP8266 chip to the Arduino environment, allowing you to write sketches, use familiar Arduino functions and libraries, and run these directly on ESP8266 without the need for an external microcontroller. ESP8266 Arduino core comes with libraries that enable it to perform a number of things. It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS servers... -
4
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present... -
When it comes to cybersecurity, what your clients don’t know can really hurt them. And believe it or not, keep them safe starts with asking questions. With ConnectWise Identify Assessment, get access to risk assessment backed by the NIST Cybersecurity Framework to uncover risks across your client’s entire business, not just their networks. With a clearly defined, easy-to-read risk report in hand, you can start having meaningful security conversations that can get you on the path of keeping your clients protected from every angle. Choose from two assessment levels to cover every client’s need, from the Essentials to cover the basics to our Comprehensive Assessment to dive deeper to uncover additional risks. Our intuitive heat map shows you your client’s overall risk level and priority to address risks based on probability and financial impact. Each report includes remediation recommendations to help you create a revenue-generating action plan.
-
5
Redshift JDBC Driver
Redshift JDBC Driver. It supports JDBC 4.2 specification
... the driver jar file and all required dependencies files to use AWS SDK for the IDP/IAM features. -
6
Tasmota
Alternative firmware for ESP8266 with easy configuration
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits... -
7
WS2812FX
WS2812 FX library for Arduino and ESP8266
This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each segment's... -
8
Blynk C++ Library
Blynk library for embedded hardware
... experience, no coding on iOS or Android required. Hardware can connect to Blynk Cloud (open-source server) over the Internet using hardware connectivity available on your board (like ESP32), or with the use of various shields (Ethernet, WiFi, GSM, LTE, etc). Blynk Cloud is available for every user of Blynk for free. Direct connection over Bluetooth is also possible. Check the included examples on how to use different types of connections (transports) and explore Blynk features. -
9
ThingPulse ESP8266 Weather Station
ESP8266 Weather Station library supporting OpenWeatherMap
This code works best with the NodeMCU V2 ESP8266 module and an 0.96" OLED display. To get you up and running in no time we created a kit that contains all the necessary parts. By buying this and other kits from us you are funding the maintenance and development of this library. Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. If you are using the PlatformIO environment for building, choose one of the available IDE integration or the Atom-based IDE... -
Drive your organization forward with the right solution at the right price. AI-powered continuous accounting and ERP to support your growth now and into the future.
-
10
ueli
Keystroke launcher for Windows and macOS
.... Enables you to use Everything Search to find files and folders on your local file system. Enables you to use the native macOS search to find files and folders on your local file system. Enables you to browse through your local file system. To start you have to enter a valid absolute filepath. Operating system commands are simple commands to control your operating system e.g. to shutdown or restart your computer. -
11
pq
Pure Go Postgres driver for database/sql
In most cases clients will use the database/sql package instead of using this package directly. Similarly to libpq, when establishing a connection using pq you are expected to supply a connection string containing zero or more parameters. A subset of the connection parameters supported by libpq are also supported by pq. Additionally, pq also lets you specify run-time parameters (such as search_path or work_mem) directly in the connection string. This is different from libpq, which does... -
12
NeoPixelBus
An Arduino NeoPixel support library
An Arduino NeoPixel support library supports a large variety of individually addressable LEDs. Please refer to the Wiki for more details. Please use the gitter channel to ask questions as the GitHub Issues feature is used for bug tracking. A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most... -
13
Hotkeys
A robust Javascript library for capturing keyboard input
HotKeys.js is an input capture library with some very special features, it is easy to pick up and use, has a reasonable footprint (~3kb) (gzipped: 1.73kb), and has no dependencies. It should not interfere with any JavaScript libraries or frameworks. You will need Node.js installed on your system. Or manually download and link hotkeys.js in your HTML, It can also be downloaded via UNPKG. react-hotkeys is the React component that listen to keydown and keyup keyboard events, defining... -
14
Hangfire
An easy way to perform background job processing
An easy way to perform background processing in .NET and .NET Core applications. No Windows Service or separate process required. Backed by persistent storage. Open and free for commercial use. Easy to set up, easy to use. No Windows Service, no Windows Scheduler, no separate applications required. Background jobs are regular static or instance .NET methods with regular arguments, no base class or interface implementation required. Once a background job was created without any exception... -
15
RF24
OSI Layer 2 driver for nRF24L01 on Arduino & Raspberry Pi/Linux
Optimized high-speed driver for nRF24L01(+) 2.4GHz wireless transceiver. More compliant with the manufacturer specified operation of the chip, while allowing advanced users to work outside the recommended operation. Utilize the capabilities of the radio to their full potential via Arduino. More reliable, responsive, bug-free and feature-rich. Easy for beginners to use, with well-documented examples and features. Consumed with a public interface that's similar to other Arduino standard libraries... -
16
FKILL
Cross-platform tool to kill processes
To kill a port, prefix it with a colon. For example: :8080. Run without arguments to use the interactive interface. Run fkill without arguments to launch the interactive UI. Force kill processes that did not exit within the given number of milliseconds. Kill all child processes along with the parent process. (Windows only). Ignore capitalization when killing a process. Note that the case is always ignored on Windows. Suppress all error messages. For example: Process doesn't exist. -
17
Particle Firmware for the Electron, P1
Device OS (Firmware) for particle devices
The Photon uses an ARM Cortex M3 CPU based microcontroller. All of the code is built around the GNU GCC toolchain offered and maintained by ARM. The build requires version 5.3.1 20160307 or newer of ARM GCC and will print an error message if the version is older than this. In order to turn your source code into binaries, you will need a tool called make. Windows users need to explicitly install make on their machines. Make sure you can use it from the terminal window. The entire Particle... -
18
HttpKernel Component
A structured process for converting a Request into a Response
The HttpKernel component provides a structured process for converting a Request into a Response by making use of the EventDispatcher component. It's flexible enough to create full-stack frameworks, micro-frameworks or advanced CMS systems like Drupal. Every HTTP web interaction begins with a request and ends with a response. Your job as a developer is to create PHP code that reads the request information (e.g. the URL) and creates and returns a response (e.g. an HTML page or JSON string... -
19
Asuswrt-Merlin
Alternative firmware for Asus wireless routers
Asuswrt-Merlin is a third party firmware for select Asus wireless routers. Based on the Asuswrt firmware developed by Asus, it brings tweaks, new features and other improvements to the original firmware, while retaining its performance and ease of use. Note that only downloads are hosted on SF.net - the complete source code can be found on https://github.com/RMerl/asuswrt-merlin (legacy 380.xx) and https://github.com/RMerl/asuswrt-merlin.ng (382 and newer releases). -
20
OpenOCD - Open On-Chip Debugger
The Open On-Chip Debugger
The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets. -
21
Formerly Intel Ethernet Drivers
Moved to github.com/intel
Notice! Effective August 16, 2024, Intel will no longer use Sourceforge to distribute software for Ethernet products. ==================== Please refer to our GitHub location for future software updates here: https://intel.github.io/ethernet-linux/ -
22
IPMI Management Utilities
Manage and interpret IPMI systems with common a software tool
ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments. -
23
DS3Windows
DS3Windows allows you to use a DualShock 3 Controller on your PC
DS3Window is an open-source program that will allow someone to get the experience of using a Playstation 3 DualShock Controller on a PC by emulating a Xbox 360 Controller. ⚠️Sometimes Windows will show unknown application error, click "More info" then click "Run anyway". -
24
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 117,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
25
myFP2ESP32 WiFi ASCOM Focus Controller
ASCOM-INDI ESP32 Wifi focuser
... what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download https://youtu.be/90KeSspN3e0