Open Source Windows Hardware Platforms - Page 8

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

Open NFC is an open source stack implementing the NFC functionnalities for many OSes. The Open NFC stack offers a comprehensive set of NFC API for Android, Linux and Windows Mobile.

OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the bios and DOS in simulation. The system is targeted to run on the DE2-70 board. In order to run the system in hardware a SDRAM and SRAM controller need to be added. These are currently in development.

5dpo Component Library for Lazarus (Sdpo) provides a comport (serial port) component, an UVC video driver component for webcams, a Gtk fast painting form and a Joystick component.

Driver para impresor / controlador fiscal EPSON en JAVA. Utiliza JNI para comunicacion con puerto serie. Testeado en winxp, linux x86_64, win7 32 / 64 sobre TMU-220AF. solo rollo papel continuo (chicos)

Web-based hardware/software inventory management for Windows, Linux, BSD computers. H-Inventory provides incident and intervention management, user and network management, network maps, services monitoring and application deployment.

EmfPrinter is a virtual printer driver for Microsoft Windows which allows you to print documents as EMF/WMF vector images or to more than 100 raster formats (JPEG,PNG,BMP,etc). Document conversion has never been easier!

Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client.

A very small and simple application that gives you time remaining to charge or discharge your battery (even if windows cannot).The final goal is to have an accurate timer that will tell how much time until your computer dies or fully charged.

Key Scripter listens to key press/release events from a keyboard or a mouse and allows to simulate key press/release and mouse events. Supports gaming keypads, such as Nostromo SpeedPad. Allows the creation of powerful key scripts for games and other applications.

These tools are used to view information about, and to control, Media Changer devices such as Tape and DVD/CD libraries.

This is the software i created for controlling my PC's power indicator. The indicator has been replaced with an Arduino controlled RGB led. Core Temp is required and the Arduino code requires the CMD Messenger library. This software is in beta, and not 100% completed yet.

A professional driver management tool that backs up and restores Windows drivers.

This is a library for easy accessing chip cards /smart cards via a chipcard reader. It currently works under Linux, FreeBSD and Windows. It is tested with Towitoko and Kobil readers.

libieee1284 is a cross-platform library for parallel port access.

USB resetting is the closest equivalent to physically unplugging and re-plugging a USB device. you might ask , How is that useful ? well the use cases will be different from user to another. In my case, it helps with accessing my slightly damaged old USB external hard drive after a mount in unix-like OSes without any i/o issues. Another one is, loop resetting my USB headset solves some weird glitching sound i constantly have while using them. Those are my special use cases. There most be more, that it can help with.

Virtual-Audio-Pipeline:- A WDM Virtual Audio Cable/Device It is a WDM based Virtual Audio Device Driver, can be used as a Virtual Sound Card. No Hardware is requred. Can be used as an Audio Loopback Device. The following are its Features 1. Supports PCM, WAVEEXTENSIBLE format 2. Supports 8 to 32 bit sample format 3. Supports 8000 to 192000 Hz Sample rate 4. Supports upto 7.1 surround sound 5. Supports Windows MME, DS, KS, WASAPI 6. Can be used with DAWs 7. It have Volume control support 8. It have Peakmeter support for sending feedbacks my email is syams_projects@yahoo.com

"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface, which provides connectivity to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Hardware: * "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ * "kmiwaveram": https://sourceforge.net/projects/kmi-wave-ram/ Software: * "cbmedimonitor" control tool * "WaveProgEdit" sound-program editor * "WaveBackup" backups * "waveaddsynth" for additive synthesis * "wavetransientutil" for transient sounds Copyright (C) 2022-2026 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. See disclaimers below and within the distribution. (We are not affiliated in any way with companies/persons mentioned on this page. All brand names and trademarks are property of their respective owners. The author is not affiliated with PPG. "CommBusTerm" is not a product by PPG.)

Java access to USB, currently using kernel 2.4 Linux-USB support. There is a "core" API for accessing USB devices, and simple tools including a USB viewer in Swing. Applications are being developed separately, including digital camera support.

This project makes it possible to switch 8 LEDS over a USB connection. It indicates the CPU work or animations. The following page contains the schematic, firmware ... http://www.cesko.host.sk/IgorPlugUSB_RS232/IgorPlug-USB%20(AVR)%20RS232_eng.htm

A GUI for the iRiver iFP driver for linux (http://sourceforge.net/projects/ifp-driver/). This graphical frontend is made with GTK2-perl.

A portable library to control the ICOM PCR-1000 computer controlled general purpose radio receiver and gui front ends for X, Aqua, and windows32

Velleman K8055 USB Experiment Interface Board driver. This driver provides a /proc interface which allows the inputs and outputs of the K8055 to be accessed as if they were files, making the K8055 accessible from any programming language and the shell. In addition to the /proc interface a joystick/input device is created for each K8055, Optionally a (user provided) script can be executed by the driver when it detects a change on one of the inputs or outputs.

Full functional PS/2 keyboard on Atmega16, works with simple circuits, and fully customizable. Performs really great! - ps2 / keyboard / ps2avr / controller / avr / hardware

Use the Belkin Nostromo N50 Speedpad on VISTA,7 and XP 32/64. No need to install drivers,plug the device and use it ! Normal/Red/Green/Blue prog levels supported ! Download the file that matches your OS in the "Files" section. GPLv3 (Source code)