Open Source Windows Hardware Platforms - Page 7

Allows you to work with COM-modems via AT commands. Adapted for modem ZTE.

AZERTY Global est une disposition de clavier française moderne qui corrige les lacunes historiques de l'AZERTY Windows tout en restant intuitive et facile à adopter. AZERTY Global ajoute un accès direct aux majuscules accentuées via le Verrouillage Majuscule intelligent (seules les lettres sont affectées), place la ponctuation française et les symboles de programmation à portée de doigt, et supporte plus de 200 langues via des touches mortes. Adaptation rapide : Seulement 5 changements par rapport à l'AZERTY classique. 95% des touches restent identiques. La plupart des utilisateurs s'adaptent en quelques heures. Aucun matériel requis : Installation logicielle simple, compatible avec tous les claviers physiques existants. 🌐 Site web : https://azerty.global

SeaBreeze is a device driver library that provides an interface to select Ocean Optics spectrometers. It is written in C/C++ and builds and runs on Windows (XP/7/8), MacOSX, and Linux (x86/x64/ARM).

Small universal tool for handling USART STM32 bootloader. Works with all STM32 family devices (also with newest STM32F4 and STM32F0). Dedicated especially for Linux users. Works in shell. There are plans to make a GUI overlay.

FileSystem is an OPENSOURCE program for advanced disk management with built-in drivers for PATA IDE Hard Disks and DVD/CDROM Drives, USB Mass Storage Drivers. Implemented file systems : FAT32 / ISO9660 / EXT2. It can be compiled for DOS, LINUX, WIN32

Fast Fourier Transforms (FFT) for Multi-CPU (and RAM) Stress Testing. Shows detailed information about physical and logical processors in the system. Included CPU Benchmark feature for speed testing. Automatically utilizes and tests all CPU cores.

Smartcard access lib for Arduino based boards connected directly to a smartcard. This is currently a work in progress. Currently it is possible to communicate with a smartcard directly connected to a Arduino board or connected via a TDA8024T (or compatible chips. e.g. DS8024). All tests have been done with a smart card slot connected directly to the Aruino board. Working: - Activation of asynchronous and synchronous smart cards - Exchanging data with supported Smart card (Sending / Receiving) - Asychron T=0 APDU communication. - Basic sychron communication - ETU calculation from TS byte. - Support class for SLE4432 / SLE4442 / SLE4441 and SLE4440 compatible sychron smartcards. Mostly used for secure data storage. Open points: - Error handling not completly implemented. No retries if parity error is found. - Setup of communication parameters from ATR - T=1 communication not supported (Still possible via "raw" sendBytes(..) / receiveBytes(..))

************************************************************************************** Steppers redirected to fastio.h from marlin firmware min switches remaped to AUX-3, GBRL uses pin change interrupts simple scheme to allow future porting of next releases command buttons currently disabled Ramps pins config moved to ramps.h cpu_map.h - min switches added GRBL_RAMPS1_4.ino for arduino IDE ************************************************************************************** Ramps 1.4 | GRBL | Test X axis | X axis | OK working Z axis | Y axis for dual motor Y axis | OK working Y axis | Z axis | OK working Ramps AUX-3 pin 3 | min X | OK working Ramps AUX-3 pin 4 | min Y | OK working Ramps AUX-3 pin 5 | min Z | not tested

The purpose of this project is to provide a convenient Java implementation for Future Technology Devices International Inc.'s (http://ftdichip.com) FTD2xx library. This library is used to access and control FTDI's USB to serial converter chips via USB.

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

CRC Generator is a command-line application that generates Verilog or VHDL code for CRC of any data width between 1 and 1024 and polynomial width between 1 and 1024. The code is written in C for Win32, bus easily portable for other platforms

Use the Belkin Nostromo N50 Speedpad on VISTA,7 and XP 32/64. No need to install drivers,plug the device and use it ! Normal/Red/Green/Blue prog levels supported ! Download the file that matches your OS in the "Files" section. GPLv3 (Source code)

cobol2j reads or writes COBOL or RPG data files imported from mainframes, AS/400 or Baby/36 environment. Packed decimal, zoned or packed date fields decoding included. EBCDIC conversion. ETL ISAM data to any other platform. PC Cobol ( ASCII ) supported.

WxPic allows, with a PC and an adapter (programmer), to program a PIC micro-controller, by loading a HEX file, reviewing and/or editing the configuration or memory and writing and/or verifying the device flash memory.

Phoebetria lets you take control of your BitFenix Recon fan controller on more operating systems than the official software. It offers all of the same features as the official software, with the exception of remote access, and has been tested on Windows, Linux, and OS X. The current plan is that future releases will add functionality and control that the official software does not provide -- giving you even more control over your fans.

A driver for old scanner and modern Windows systems. Currently supported: Windows XP, 2003, Vista, 2008, Windows 7. All systems are 32-bit only. For more info look an the project homepage.

Open DMX USB interface: this project created by ENTTEC (www.enttec.com) is an open source hardware and software DMX512 interface

Open NFC is an open source stack implementing the NFC functionnalities for many OSes. The Open NFC stack offers a comprehensive set of NFC API for Android, Linux and Windows Mobile.

GB Cart Flasher is app+device for GameBoy Cartridges reading/writing. With this set you can: make game backups from cartridges and play them on PC, transfer game saves between cartridge and PC and test written by yourself games directly on console.

A professional driver management tool that backs up and restores Windows drivers.

ASCOM driver for the LittleFoot Elegance Photo (LFEP) telescope controller. Firmware 6.x is fully supported - firmware 5.x is partially supported (all LFEP features are available but configuration is only possible by handbox). Contains drivers for telescope, focuser, camera, filter wheel, roof controller and dew heater which shares a single connection to the controller.

jTomtom is et Java GPS updater. With jTomtom you can update the QuickFix et Radar POI in your Tomtom GPS

These tools are used to view information about, and to control, Media Changer devices such as Tape and DVD/CD libraries.

This is the software i created for controlling my PC's power indicator. The indicator has been replaced with an Arduino controlled RGB led. Core Temp is required and the Arduino code requires the CMD Messenger library. This software is in beta, and not 100% completed yet.

VTD-XML is the next generation XML parser/indexer/editor/slicer/assembler/xpath-engine that goes beyond DOM, SAX and PULL in performance, memory usage, and ease of use.