Search Results for "source code formatter" - Page 2
Sort By:
Showing 80 open source projects for "source code formatter"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
1
...If you are a beginner in device drivers you can take this code and enhance it to support more (or less) axes, buttons or POVs.
-
2
MySensors
MySensors library and examples
...We provide easy-to-follow build instructions, ready-to-use code examples, and adaptable open-source hardware designs. All of this runs on the MySensors software library for secure communication that has been battle-tested with more than 20 of the leading home automation controllers on the market. So, join in, have fun and create your own connected home experience! We've combined the Arduino platform with a small radio transceiver into a fun, flexible world of low cost wireless sensors. -
3
NoteBook FanControl (NBFC)
Cross-platform fan control service for notebooks
...Currently, there are no pre-built releases for Linux, but you can easily build NBFC yourself. In general the NBFC Wiki is the first place to go if you have any questions. If you want to build NBFC from source, the first thing you have to do is to download the source code. You can easily clone the NBFC repository via git. Make sure the Mono runtime + development tools are installed on your machine (Debian based distros: mono-complete, Arch based distros: mono). Config files are an integral part of NBFC, because they define how NBFC interacts with your notebook's embedded controller (EC). ... -
4
EtherCard
EtherCard is an IPv4 driver for the ENC28J60 chip
EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can... -
AI-generated apps that pass security reviewRetool lets you generate dashboards, admin panels, and workflows directly on your data. Type something like “Build me a revenue dashboard on my Stripe data” and get a working app with security, permissions, and compliance built in from day one. Whether on our cloud or self-hosted, create the internal software your team needs without compromising enterprise standards or control.
-
5
HDDtempNC
Tool to acquire hard disk drive temperature from the network interface
###### HDDtempNC has now moved to Github ###### ###### Please visit the Github project at https://github.com/viharm/HDDtempNC ###### HDDtempNC provides a script to acquire hard disk drive temperature for a target host by querying an existing HDDtemp daemon and then parse the results according to the request. See project wiki for more details, usage and code. -
6
Cortex GNAT Run Time Systems
Supports writing Ada software for Cortex-M3, M4F boards
DEVELOPMENT OF THIS PROJECT HAS MOVED TO GITHUB, at https://github.com/simonjwright/cortex-gnat-rts This project contains various GNAT Ada Run Time Systems (RTSs) targeted at Cortex boards: so far, the Arduino Due (http://www.arduino.org) and the STM32F4-series evaluation boards from STMicroelectronics (http://www.st.com). It is intended that releases will allow the development of proprietary software (by the use of the GCC Runtime Library exception for project-developed code, and by... -
7
Sprut Usb4All Framework
A high level API, that provides access to a Microcontroller with the
This library encapsulates the communication protocol of the Sprut-usb4all. Supporting the of MCD and CDC firmware. -
8
C# source code to get Optris MSPro, MSPlus IR thermometer measures, using the specific Usb/Serial cable (Silicom Lab CP210X USB to UART bridge in fact). For developper only : go to Files menu to get code. Maybe also for LS series. Say me back if it's OK.
-
9
Transistor Specifications
50 most common transistor specs
The specifications and information for the 50 most common transistors used in small electronic circuits, robots, and prototyping. -
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
10
Resistor Value Identifier
Identify electronic resistor values
This HTML utility allows the user to select standard color codes or surface mount numbers, then it identifies the resistor value. There is no need to memorize color codes or multipliers. An online working example of this program can be used at ZoomAviation.com/programs. -
11
...Why not have the DLL as managed code?? Why not simply reference the library in your project and just call its functions?? This project does just that Licence: LGPLV3.: In summary, the only thing we ask is if you improve / bugfix / extend the library then feed these changes back into the project by emailing jon_newcomb or requesting sourceforge access. Applications you develop that use this library are not covered by this licence and can remain closed source and commercial
-
12
ApproxAdderLib
Library of Approximate Adders
We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan. -
13
IRK! Infrared Remote USB Keyboard
Control your computer with an IR remote
This is an open-hardware Infrared Remote Controlled USB keyboard, without keys, implemented using a PIC micro-controller and MikroC. IRK! enables you to use your LEARNING remote control to control any system that you can plug a USB keyboard into (Windows, Linux, Mac). Great for controlling a home theatre system such as MythTV, XBMC or Media Center. No drivers are required. You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on... -
14
...The library provides components to implement both a ModBus master and a Modbus slave, and is based on the Indy component set (both Indy 9 and 10 are supported) De source code of the project has been moved to GitHub!
-
15
...MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus RTU’ and ‘Modbus ASCII’ serial communication versions of the protocol, and is intended for use on Linux, OS X and Windows platforms. It is open source, and has the Apache License, Version 2.0.
-
16
G-CNC Sender
GCode sender for ramps and marlin firmware for CNC Milling Machine
GCode sender for ramps and marlin firmware for CNC Milling Machine 3D preview RS232 and RS232 over TCP drivers Full GComands control, disable, replace, pause. Full machine control Remap XYZ coordinates GComands description After install select Help->Check for updates.. -
17
at3mod
Improved LabVIEW drivers for Andor sCMOS cameras
This project provides an improved interface to the atcoreA driver used to control Andor cameras using SDK3 - namely their sCMOS cameras Neo and Zyla. The interface now includes LabVIEW error handling and buffer handling code along with examples of how to operate the cameras from a dataflow environment. -
18
tew-652brp_v2_wcl
Client mode firmware for TrendNET TEW-652BRP V2
Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client. -
19
Cobos Project
the disruptive IDE for COBOL developers
The Cobos Project is an Open Source initiative from Metrixware, dedicated to Mainframe COBOL CICS, DB2, IMS developments within the Eclipse Platform. -
20
Server Benchmark
Server benchmark and burn in software.
...The software also allows users to benchmark processing and memory utilization by dynamically adding threads and building arrays to test memory capacity. Server Benchmark is also a great way to maximize capacity and test response from within your existing Citrix XenApp farm, and VDI infrastructure. Source code is attached to the "Source" folder. -
21
Firmware and schematic for a USB HID compatible remote control consumer device using an Atmel AVR Atmega8. No drivers are needed for WindowsXP / WMP10 / Vista / Windows 7. Press Play/Stop/Pause and control media player directly from your remote control.
-
22
This project provides a chip card interface device driver for the PC/SC Lite server deamon (pcscd). The driver provides a standard PC/SC interface to NFC devices supported by libnfc. Note, that this project is currently not actively developed. However, the code has been adopted by the libnfc-Team. See https://code.google.com/p/ifdnfc/source/checkout.
-
23
Brahma is an open-source library written for the .NET 3.5 framework (in C# 3.0), to provide high-level access to parallel streaming computations on a variety of processors, including GPUs.
-
24
Schematics and micro-controller code for a version of the scoring apparatus used in competitive fencing and a compatible remote control.
-
25
JTAG interface library for FTDI chips. Linux port of the ftcjtag library from ftdi( http://bit.ly/98Vul3 ). Implementation relies on ftd2xx.so ( not libftdi.so ) which makes it windows compatible.
