Search Results for "re-tools"
Sort By:
Showing 41 open source projects for "re-tools"
View related business solutions-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
Go from Code to Production URL in SecondsSkip the Kubernetes configs. Cloud Run handles HTTPS, scaling, and infrastructure automatically. Two million requests free per month.
-
1
S.M.A.R.T. Monitoring Tools
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite. -
2
QGroundControl
Cross-platform ground control station for drones
...Additional tools include log downloading, geotagging, MAVLink inspection, consoles, and joystick control across desktop and mobile systems. -
3
Lenovo Legion Linux Support
Driver and tools for controlling Lenovo Legion laptops in Linux
Lenovo Legion Linux (LLL) brings additional drivers and tools for Lenovo Legion series laptops to Linux. It is the alternative to Lenovo Vantage or Legion Zone (both Windows only). It allows you to control features like the fan curve, power mode, power limits, rapid charging, and more. This has been achieved through reverse engineering and disassembling the ACPI firmware, as well as the firmware and memory of the embedded controller (EC). -
4
PX4 Autopilot
PX4 Autopilot Software
PX4 is used in a wide range of use-cases, from consumer drones to industrial applications. It is also the leading research platform for drones and has been successfully applied to underwater vehicles and boats. PX4 provides a standard to deliver drone hardware support and software stack, allowing an ecosystem to build and maintain hardware and software in a scalable way. Drone development is complicated, and how to get started can be daunting and hard to navigate. These tutorials and... -
Patching and Endpoint Management for Under $1/EndpointSplashtop AEM gives IT teams automated patching, monitoring, and unattended remote access for Windows and macOS. No long setup, no paying extra for key features.
-
5
AWS EC2 FPGA
AWS EC2 FPGA hardware and software development Kit
AWS EC2 FPGA Development Kit is a set of development and runtime tools to develop, simulate, debug, compile and run hardware-accelerated applications on Amazon EC2 F1 instances. It is distributed between this GitHub repository and FPGA Developer AMI - Centos/AL2 provided by AWS with no cost of development tools. After creating an FPGA design (also called CL - Custom logic), developers can create an Amazon FPGA Image (AFI) and easily deploy it to an F1 instance. -
6
Betaflight App
Cross platform configuration and management application
...It provides a graphical environment for configuring drones and other supported aircraft without manually editing firmware settings. Users can adjust flight characteristics, receiver inputs, motor configurations, and onboard system parameters. The application includes tools for tuning PID controllers, configuring flight modes, and adjusting filtering settings. It also supports firmware flashing, sensor calibration, and diagnostic monitoring of connected flight controllers. Betaflight App is available as a Progressive Web Application and as standalone software for multiple operating systems. Designed for FPV enthusiasts and drone builders, it simplifies flight controller setup, troubleshooting, and performance optimization. -
7
ExpressLRS Configurator
Cross platform configuration & build tool for the ExpressLRS radio
...It helps streamline firmware installation and updates across supported ExpressLRS hardware. By organizing configuration and build processes into a single interface, it reduces the need for manual development tools and complex commands. ExpressLRS Configurator is designed for drone pilots, RC enthusiasts, and technicians who need to maintain reliable and customizable radio communication systems. -
8
reManager
Linux, MacOS, and Windows desktop app for managing mods
...Powered by the Vellum package manager, it provides a graphical interface for discovering, installing, updating, and removing mods. Users can manage multiple tablets through password, SSH key, or SSH agent authentication. The software includes tools for checking device status, recovering after operating system updates, and controlling installed services. It also provides an interactive terminal, file browser, and configuration editor for advanced management. Users can back up documents, import PDFs and EPUBs, and manage installed operating system versions. Available for Windows, macOS, Linux, iPhone, and iPad, reManager simplifies tablet customization and maintenance. -
9
BRL-CAD
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools. -
Veeam Data Platform v13.1 - Get Your Free TrialTry Veeam Data Platform today. Experience the unified platform that's secure by design, portable by default, and proven to recover clean, fast, and anywhere.
-
10
Zabbix-HDD
Zabbix extension that reports various HDD status using various tools
This extension uses not only smartctl (smartmontools) but other available tools to determine the existance of an HDD and as much as possible of its status. As a Zabbix "auto-discovery" process, these results can reflect changes in available HDD in near-to-real-time. -
11
JxMake
A Java-based cross-platform build system.
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full... -
12
Phobia
Phobia Motor Controller
PMC is an open project that aims to build the quality permanent magnet synchronous machine (PMSM) controller for use in a variety of scopes like RC or electric transport. -
13
A new 64-bit RISC platform, complemented by a set of development tools, standards specifications and synthesizable VHDL implementations.
-
14
usb-overclock-kit
Cross-platform recon, backup, benchmarking, and tuning for commodity U
USB Overclock Kit is a cross-platform toolkit for recon, backup, benchmarking and tuning of commodity USB flash drives, with honest 'overclock' semantics and a revert path for every change. macOS and Linux host tools, with the vendor MPTool on Windows for the flash step. -
15
kmiwaveram
"KMI Wave-RAM"
"KMI Wave-RAM" ("kmiwaveram") "kmiwaveram" contains a "Wave-RAM" of 8 banks of 16K sample words of 16bit each, which can possibly be used in a PPG synthesizer such as the "Wave 2.2", "Wave 2.3", or "EVU". For sample-transfer, "kmiwaveram" has a USB interface and an optional "PPG Communication Bus" interface. On a "CommBusTerm" system, the tools "cbmedimonitor" and "WaveProgEdit" can be used for "fast" sample-transfer to "kmiwaveram" via USB. "kmiwaveram" contains hardware and software components: * "kmiwaveram-HW": "KMI Wave-RAM" hardware * "KMIWAVERAMBIOS": firmware for "kmiwaveram-HW" Copyright (C) 2026 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. ... -
16
OpenMVG
open Multiple View Geometry library. Basis for 3D computer vision
...Command-line binaries handle individual reconstruction stages that can be combined into complete pipelines. Reconstructed scenes can be exported to other multi-view stereo tools for dense point clouds and textured meshes. The project emphasizes readable, maintainable implementations backed by tests and examples. It runs on Linux, macOS, Windows, Android, and iOS. -
17
HelloWord-Smart Keyboard
High-end modular keyboard platform with deep customizability
...The hardware architecture is modular: the keyboard, dynamic module, and base connect via FFC/contacts so you can swap out the dynamic side module or bottom. The documentation includes 3D models for casing, firmware binaries, and tools for customization. -
18
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
-
19
DroneSploit
Drone pentesting framework console
...Its interface is modeled after Metasploit to provide a familiar module-oriented workflow for security researchers. The framework gathers drone-specific assessment techniques and security modules in one console. Individual modules activate only when their required external tools and dependencies are available. Its architecture is built on the SploitKit framework and can be extended with additional modules. The project has been presented as a drone penetration-testing research platform at security conferences. Because its capabilities can affect real devices and networks, it is appropriate only for systems covered by explicit testing authorization. -
20
gym-pybullet-drones
PyBullet Gymnasium environments for multi-agent reinforcement
Gym-PyBullet-Drones is an open-source Gym-compatible environment for training and evaluating reinforcement learning agents on drone control and swarm robotics tasks. It leverages the PyBullet physics engine to simulate quadrotors and provides a platform for studying control, navigation, and coordination of single and multiple drones in 3D space. -
21
NoteBook FanControl (NBFC)
Cross-platform fan control service for notebooks
...If you want to build NBFC from source, the first thing you have to do is to download the source code. You can easily clone the NBFC repository via git. Make sure the Mono runtime + development tools are installed on your machine (Debian based distros: mono-complete, Arch based distros: mono). Config files are an integral part of NBFC, because they define how NBFC interacts with your notebook's embedded controller (EC). The EC monitors your system's temperatures and controls the fan(s). It sits on the motherboard or is integrated into a Super I/O chip & is connected to the Southbridge via the Low Pin Count (LPC) bus. -
22
EventMachine
EventMachine, fast, simple event-processing library for Ruby programs
EventMachine is an event-driven I/O and lightweight concurrency library for Ruby. It provides event-driven I/O using the Reactor pattern, much like JBoss Netty, Apache MINA, Python's Twisted, Node.js, libevent and libev. Extremely high scalability, performance and stability for the most demanding production environments. An API that eliminates the complexities of high-performance threaded network programming, allowing engineers to concentrate on their application logic. This unique... -
23
rkflashtool
Tools for flashing Rockchip devices
Tools for flashing Rockchip devices. -
24
usb-resetter
Simple graphical usb reset tool
USB resetting is the closest equivalent to physically unplugging and re-plugging a USB device. you might ask , How is that useful ? well the use cases will be different from user to another. In my case, it helps with accessing my slightly damaged old USB external hard drive after a mount in unix-like OSes without any i/o issues. Another one is, loop resetting my USB headset solves some weird glitching sound i constantly have while using them. -
25
Gentoo CNC
Solution for changing your device into full-feature CNC controller
GentooCNC is a Gentoo based Linux didtribution designed to support hard real-time control of equipment such as industrial machine tools, 3D printers, laser cutters, robots, and coordinate measuring machines using LinuxCNC. GentooCNC is designed to target embedded platforms such as the BeagleBone, Mini2440, as well as conventional desktop platforms.