Search Results for "computer aided software engineering"

EduMIPS64 (aka edumips) is a cross-platform MIPS 64 ISA simulator. It can be used to run and debug MIPS programs that are written using the MIPS64 instruction set. It supports visual debugging and lets you see what instructions do in the pipeline.

iWattnick aims to be a top-class computer for e-bikes, e-scooters, e-motorcycles. It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to...

GentooCNC is a Gentoo based Linux didtribution designed to support hard real-time control of equipment such as industrial machine tools, 3D printers, laser cutters, robots, and coordinate measuring machines using LinuxCNC. GentooCNC is designed to target embedded platforms such as the BeagleBone, Mini2440, as well as conventional desktop platforms.

PUB! is a Programmable USB Button on which you can program with a sequence of keystrokes. When you press the button those keystrokes are "replayed" over a USB connection. The button is programmed using an innovative and slightly quirky interface that does not require any custom software to be installed on your computer. All you need is a text editor like Notepad or gedit.

GCode sender for ramps and marlin firmware for CNC Milling Machine 3D preview RS232 and RS232 over TCP drivers Full GComands control, disable, replace, pause. Full machine control Remap XYZ coordinates GComands description After install select Help->Check for updates..

Note: The project has moved to https://github.com/pyhys/minimalmodbus The files available here are very old, download from Github instead. MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus...